FS10R12VT3BOMA1 Equivalent & Substitute Parts

Part Overview

The FS10R12VT3BOMA1 is an IGBT Module manufactured by Infineon Technologies, configured as a three-phase inverter with 1200 V collector-emitter breakdown voltage and 16 A maximum collector current. This chassis mount module is designed for high-voltage switching applications requiring three-phase power conversion.

The FS10R12VT3BOMA1 carries an Obsolete product status. Identifying equivalent and substitute parts is necessary for system redesign, production continuity, and long-term supply chain planning when original inventory becomes unavailable.

Substiute Parts

FS10R12VT3BOMA1

Infineon TechnologiesIn Stock: 1073FS10R12VT3BOMA1 Datasheet

Current PartRFQ

FS10R12VT3BOMA1

Infineon TechnologiesIn Stock: 1073FS10R12VT3BOMA1 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FS10R12VT3BOMA1 is determined by strict equivalence across the following critical parameters:

Electrical Parameters (Non-Negotiable):

• Voltage - Collector Emitter Breakdown (Max): 1200 V
• Current - Collector (Ic) (Max): 16 A
• Power - Max: 64 W
• Vce(on) (Max) @ Vge, Ic: 2.45 V @ 15 V, 10 A
• Current - Collector Cutoff (Max): 1 mA
• Input Capacitance (Cies) @ Vce: 700 pF @ 25 V

Mechanical & Environmental Parameters:

• Configuration: Three Phase Inverter
• Mounting Type: Chassis Mount
• Package / Case: Module
• Operating Temperature Range: -40°C ~ 125°C

Compliance & Regulatory Parameters:

• RoHS Status: ROHS3 Compliant
• Moisture Sensitivity Level (MSL): 1 (Unlimited)
• REACH Status: REACH Unaffected

A substitute part must match all electrical parameters exactly, maintain the three-phase inverter configuration, support chassis mount installation, and comply with the same regulatory standards. Deviations in any of these parameters disqualify a part from direct substitution.

Parameter Comparison

Engineering Selection Recommendations

The FS10R12VT3BOMA1 is classified as Obsolete. The parametric equivalent identified maintains identical electrical specifications, mechanical configuration, and regulatory compliance status.

Both the main part and its parametric equivalent are ROHS3 Compliant and REACH Unaffected, ensuring compatibility with current environmental and regulatory requirements. The Moisture Sensitivity Level of 1 (Unlimited) indicates no moisture sensitivity constraints during storage and handling.

Selection between equivalent parts should be based on current inventory availability and supply chain lead times, as all electrical and mechanical parameters are identical.

Frequently Asked Questions (FAQ)

Q: What makes a part a true equivalent to the FS10R12VT3BOMA1?

A: A true equivalent must match all electrical parameters (1200 V breakdown voltage, 16 A collector current, 64 W power rating, 2.45 V Vce(on), 1 mA cutoff current, 700 pF input capacitance), maintain the three-phase inverter configuration, support chassis mount installation, operate across the -40°C to 125°C temperature range, and comply with ROHS3 and REACH standards.

Q: Can I substitute a part with different voltage or current ratings?

A: No. The voltage and current ratings are fundamental to the IGBT module's application. Deviations in these parameters disqualify a part from direct substitution and require complete circuit redesign.

Q: Does the Obsolete product status affect substitution eligibility?

A: The Obsolete status indicates the part is no longer in active production. Equivalent parts must maintain the same specifications and compliance certifications. Availability may vary by supplier and inventory status.

Q: Are there any thermal or mounting considerations for chassis mount modules?

A: The FS10R12VT3BOMA1 is specified for chassis mount installation with an operating temperature range of -40°C to 125°C. Equivalent parts must support identical mounting and thermal specifications.

Q: What is the significance of the 700 pF input capacitance specification?

A: Input capacitance affects gate drive circuit design and switching speed. Equivalent parts must maintain this specification to ensure compatible gate drive performance and switching characteristics.