FR107GP-AP Equivalent & Substitute Parts

Part Overview

The FR107GP-AP is a general-purpose rectifier diode rated for 1000 V DC reverse voltage and 1 A average rectified current in a through-hole DO-41 package. Manufactured by Micro Commercial Co, this component is classified as Active and features fast recovery characteristics with a reverse recovery time of 500 ns. The part is RoHS3 compliant and carries unlimited moisture sensitivity rating.

Substitute parts become necessary when the primary part experiences inventory constraints, extended lead times, or when alternative packaging formats better suit manufacturing requirements. The FR107GP-AP has documented equivalent and substitute options that maintain electrical compatibility within specified parameters.

Substiute Parts

FR107GP-AP

Micro Commercial CoIn Stock: 957FR107GP-AP Datasheet

Current PartRFQ

FR107G

Taiwan Semiconductor CorporationIn Stock: 2469FR107G Datasheet

DirectRFQ

1N4007FFG

onsemiIn Stock: 653971N4007FFG Datasheet

SimilarRFQ

PG1010R_AY_00001

Panjit International Inc.In Stock: 5861PG1010R_AY_00001 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FR107GP-AP is determined by electrical parameter equivalence and mechanical compatibility. The critical parameters that define substitutability are:

Electrical Parameters:

• Voltage - DC Reverse (Vr) (Max): 1000 V minimum
• Current - Average Rectified (Io): 1 A minimum
• Voltage - Forward (Vf) (Max) @ If: 1.3 V or lower at 1 A
• Speed Classification: Fast Recovery (≤ 500ns) or Standard Recovery
• Reverse Recovery Time (trr): 500 ns or lower
• Current - Reverse Leakage @ Vr: 10 µA or lower at 1000 V

Mechanical Parameters:

• Mounting Type: Through Hole
• Package / Case: DO-204AL, DO-41, or Axial configurations
• Operating Temperature Range: -55°C to 150°C minimum

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• REACH Status: REACH Unaffected

Substitute parts are classified as Direct Manufacturer Equivalent, Similar Manufacturer Equivalent, or Parametric Equivalent based on the degree of parameter alignment and manufacturer designation.

Parameter Comparison

Engineering Selection Recommendations

FR107G (Direct Manufacturer Equivalent)

The FR107G from Taiwan Semiconductor Corporation is a direct equivalent to the FR107GP-AP. Both parts share identical electrical specifications including 1000 V reverse voltage, 1 A average rectified current, 1.3 V forward voltage at 1 A, and 500 ns reverse recovery time. Both maintain Active product status and ROHS3 compliance. The FR107G is supplied in DO-204AL (DO-41) package format with 2400 pieces in stock, providing superior availability compared to the main part.

PG1010R_AY_00001 (Parametric Equivalent)

The PG1010R_AY_00001 from Panjit International Inc. meets all electrical requirements of the FR107GP-AP with identical voltage and current ratings, forward voltage, and recovery time specifications. This part demonstrates superior reverse leakage performance at 1 µA versus 5 µA for the main part. The PG1010R_AY_00001 maintains Active status and ROHS3 compliance with 5825 pieces in stock. Package format is DO-41, matching the main part's supplier device package.

1N4007FFG (Similar Manufacturer Equivalent)

The 1N4007FFG from onsemi meets the core voltage and current requirements with 1000 V reverse voltage and 1 A average rectified current. However, this part is classified as Not For New Designs and features Standard Recovery characteristics (>500ns) rather than Fast Recovery. Forward voltage is lower at 1.1 V versus 1.3 V, and reverse leakage is higher at 10 µA. The 1N4007FFG is supplied in Axial package format. This part is suitable only for legacy design maintenance or replacement scenarios where recovery speed is not a critical constraint.

Frequently Asked Questions (FAQ)

Q: Can the FR107G directly replace the FR107GP-AP in existing designs?

A: Yes. The FR107G shares identical electrical specifications with the FR107GP-AP across all critical parameters including reverse voltage, forward voltage, current rating, and recovery time. Both parts are Active status and ROHS3 compliant. The primary difference is packaging format (DO-204AL versus DO-41) and supplier availability.

Q: What is the difference between the FR107GP-AP and PG1010R_AY_00001?

A: Both parts meet identical voltage, current, and recovery time specifications. The PG1010R_AY_00001 demonstrates lower reverse leakage current at 1 µA compared to 5 µA for the FR107GP-AP. Both are supplied in DO-41 package format and maintain Active product status with ROHS3 compliance.

Q: Is the 1N4007FFG suitable as a substitute for the FR107GP-AP?

A: The 1N4007FFG meets the voltage and current requirements but differs in recovery speed classification. The 1N4007FFG features Standard Recovery (>500ns) whereas the FR107GP-AP features Fast Recovery (≤500ns). Additionally, the 1N4007FFG is designated Not For New Designs. Substitution is limited to applications where recovery speed is not performance-critical and legacy support is required.

Q: What packaging formats are available for FR107 series rectifiers?

A: The FR107 series is available in DO-204AL, DO-41, and Axial package configurations. The FR107GP-AP is supplied in DO-41 format. The FR107G is supplied in DO-204AL (DO-41) format. The 1N4007FFG is supplied in Axial format. All three package types are mechanically compatible with through-hole mounting.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. The FR107G, 1N4007FFG, and PG1010R_AY_00001 are all ROHS3 compliant and REACH unaffected, matching the compliance status of the FR107GP-AP.

Q: What is the operating temperature range for these diodes?

A: The FR107GP-AP, FR107G, and PG1010R_AY_00001 operate across -55°C to 150°C junction temperature. The 1N4007FFG operates across a wider range of -65°C to 175°C.

Q: Which substitute part offers the best reverse leakage performance?

A: The PG1010R_AY_00001 demonstrates the lowest reverse leakage current at 1 µA @ 1000 V, compared to 5 µA for the FR107GP-AP and 10 µA for the 1N4007FFG.