FR1007-TP Equivalent & Substitute Parts

Part Overview

The FR1007-TP is a general-purpose rectifier diode rated for 1000 V DC reverse voltage and 10 A average rectified current, packaged in an R-6 axial through-hole configuration. This component is classified as obsolete, indicating that the original packaging or distribution method is no longer actively produced. Identifying equivalent substitute parts is necessary to maintain design continuity and ensure component availability for new production runs, repairs, and system upgrades.

Substiute Parts

FR1007-TP

Micro Commercial CoIn Stock: 1122FR1007-TP Datasheet

Current PartRFQ

FR1007GP-TP

Micro Commercial CoIn Stock: 829FR1007GP-TP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FR1007-TP is determined by electrical and mechanical parameter equivalence. The following criteria establish substitutability:

Electrical Parameters (Critical):

• Voltage - DC Reverse (Vr) (Max): 1000 V
• Current - Average Rectified (Io): 10 A
• Voltage - Forward (Vf) (Max) @ If: 1.3 V @ 10 A
• Reverse Recovery Time (trr): 500 ns
• Speed Classification: Fast Recovery ≤ 500ns, > 200mA (Io)

Mechanical Parameters (Critical):

• Mounting Type: Through Hole
• Package / Case: R-6, Axial

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Operating Temperature Range: -55°C ~ 150°C

The FR1007GP-TP meets all electrical and mechanical substitution criteria. The primary distinction is packaging format: FR1007-TP is supplied in standard packaging, while FR1007GP-TP is supplied in Tape & Reel (TR) format. Both components share the same base product number (FR1007) and are manufactured by Micro Commercial Co.

Parameter Comparison

*The FR1007GP-TP exhibits lower reverse leakage current (5 µA vs. 10 µA), which represents improved performance within the same electrical specification class.

Engineering Selection Recommendations

FR1007GP-TP as Primary Substitute:

The FR1007GP-TP is the direct electrical and mechanical equivalent of the FR1007-TP. Selection of FR1007GP-TP is supported by the following factors:

1. Product Status: FR1007GP-TP holds Active status, ensuring continued availability and manufacturing support, whereas FR1007-TP is Obsolete.

2. Electrical Equivalence: All critical electrical parameters are identical, including voltage rating, current rating, forward voltage drop, and recovery time specifications.

3. Mechanical Compatibility: Both components utilize R-6 axial through-hole packaging, ensuring direct physical compatibility with existing PCB designs and assembly processes.

4. Compliance Alignment: Both components maintain ROHS3 compliance and identical operating temperature ranges (-55°C to 150°C).

5. Performance Enhancement: The FR1007GP-TP demonstrates lower reverse leakage current (5 µA vs. 10 µA), providing improved performance characteristics within the same specification envelope.

6. Packaging Consideration: FR1007GP-TP is supplied in Tape & Reel format, which is standard for automated assembly operations. Organizations using manual assembly or requiring bulk quantities may need to evaluate packaging logistics independently.

Frequently Asked Questions (FAQ)

Q: Can FR1007GP-TP be used as a direct replacement for FR1007-TP in existing designs?

A: Yes. The FR1007GP-TP is electrically and mechanically equivalent to the FR1007-TP. Both components share identical voltage ratings (1000 V), current ratings (10 A), forward voltage characteristics (1.3 V @ 10 A), and package geometry (R-6 axial). The components are directly interchangeable at the circuit level.

Q: What is the difference between FR1007-TP and FR1007GP-TP?

A: The primary difference is packaging format. FR1007-TP is supplied in standard packaging, while FR1007GP-TP is supplied in Tape & Reel (TR) format. Additionally, FR1007GP-TP is an active product with current manufacturing support, whereas FR1007-TP is obsolete. The FR1007GP-TP also exhibits lower reverse leakage current (5 µA vs. 10 µA).

Q: Why is FR1007-TP listed as obsolete?

A: Obsolete status indicates that the original packaging or distribution method is no longer actively produced by the manufacturer. This does not reflect the performance or reliability of the component itself, but rather the availability of that specific packaging configuration. The FR1007GP-TP provides continued access to the same electrical and mechanical specifications through an active product line.

Q: Are there any thermal or electrical performance differences between these parts?

A: No thermal differences exist; both components operate across the same temperature range (-55°C to 150°C). The FR1007GP-TP exhibits improved reverse leakage characteristics (5 µA vs. 10 µA at 1000 V), which represents enhanced performance within the same specification class. All other electrical parameters are identical.

Q: What does Tape & Reel (TR) packaging mean?

A: Tape & Reel packaging is a standardized format for automated component placement equipment used in high-volume manufacturing. Components are wound on a continuous tape and supplied on reels, enabling direct integration with pick-and-place assembly systems. This format is distinct from bulk or tube packaging used for manual assembly operations.

Q: Is the FR1007GP-TP RoHS compliant?

A: Yes. The FR1007GP-TP is ROHS3 compliant, meeting the same environmental and material restrictions as the FR1007-TP. Both components are suitable for applications requiring RoHS compliance.

Q: Can I use FR1007GP-TP in high-frequency switching applications?

A: Both components are classified as fast recovery diodes with a reverse recovery time of 500 ns. This specification applies to applications requiring switching speeds within this performance envelope. Specific application suitability depends on circuit design requirements and operating frequency, which are outside the scope of this substitution reference.