FR1007-AP Equivalent & Substitute Parts

Part Overview

The FR1007-AP is a general-purpose rectifier diode rated for 1000 V DC reverse voltage and 10 A average rectified current in an R-6 axial through-hole package. This component is classified as obsolete, which necessitates identification of active equivalent parts for ongoing design support and procurement continuity. The FR1007-AP remains available in inventory but is no longer in active production status.

Substiute Parts

FR1007-AP

Micro Commercial CoIn Stock: 713FR1007-AP Datasheet

Current PartRFQ

FR1007GP-AP

Micro Commercial CoIn Stock: 1028FR1007GP-AP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FR1007-AP is determined by electrical and mechanical parameter equivalence. The primary substitution criteria are:

Electrical Parameters:

• Voltage - DC Reverse (Vr) (Max): 1000 V
• Current - Average Rectified (Io): 10 A
• Voltage - Forward (Vf) (Max) @ If: 1.3 V @ 10 A
• Reverse Recovery Time (trr): 500 ns
• Mounting Type: Through Hole
• Package / Case: R-6, Axial

Compliance Parameters:

• RoHS Status: ROHS3 Compliant
• Operating Temperature Range: -55°C ~ 150°C

Parts meeting these specifications are electrically and mechanically interchangeable with the FR1007-AP. The FR1007GP-AP satisfies all substitution criteria and is manufactured by the same supplier (Micro Commercial Co), ensuring design compatibility and form-factor equivalence.

Parameter Comparison

Engineering Selection Recommendations

The FR1007GP-AP is the direct active equivalent for the obsolete FR1007-AP. Both parts are manufactured by Micro Commercial Co and share identical electrical ratings, package specifications, and compliance certifications. The FR1007GP-AP is currently in active production status with higher inventory availability (973 Pcs vs. 676 Pcs), ensuring long-term procurement reliability.

The FR1007GP-AP exhibits improved reverse leakage characteristics (5 µA @ 1000 V compared to 10 µA @ 1000 V), representing a performance enhancement while maintaining full electrical and mechanical compatibility. Both parts are ROHS3 compliant and carry identical operating temperature ranges and moisture sensitivity classifications.

For new designs or component refresh cycles, the FR1007GP-AP is the appropriate selection. For existing designs currently using the FR1007-AP, direct substitution with the FR1007GP-AP is supported without circuit modification or re-qualification.

Frequently Asked Questions (FAQ)

Q: Can the FR1007GP-AP be used as a direct replacement for the FR1007-AP in existing designs?

A: Yes. The FR1007GP-AP is electrically and mechanically equivalent to the FR1007-AP. Both parts share identical voltage ratings (1000 V), current ratings (10 A), forward voltage characteristics (1.3 V @ 10 A), recovery time (500 ns), and R-6 axial through-hole packaging. No circuit modifications are required.

Q: What is the difference between the FR1007-AP and FR1007GP-AP?

A: The primary difference is product status. The FR1007-AP is obsolete, while the FR1007GP-AP is active in production. The FR1007GP-AP also exhibits lower reverse leakage current (5 µA @ 1000 V versus 10 µA @ 1000 V), representing improved performance. All other electrical and mechanical specifications are identical.

Q: Are both parts RoHS compliant?

A: Yes. Both the FR1007-AP and FR1007GP-AP are ROHS3 compliant and carry identical moisture sensitivity levels (MSL 1, Unlimited).

Q: What is the operating temperature range for these diodes?

A: Both parts operate across a junction temperature range of -55°C to 150°C.

Q: Is the R-6 axial package the same for both parts?

A: Yes. Both the FR1007-AP and FR1007GP-AP use the R-6 axial through-hole package, ensuring identical PCB footprint and mounting compatibility.

Q: Why should I select the FR1007GP-AP over the FR1007-AP?

A: The FR1007GP-AP is the recommended selection for new designs and procurement because it is in active production status, ensuring long-term availability and supply chain stability. The obsolete FR1007-AP should be transitioned to the FR1007GP-AP for design continuity.