FPG.00.302.CLAD17 Equivalent & Substitute Parts

Part Overview

The FPG.00.302.CLAD17 is a 2-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring shielded, push-pull fastening with gold-plated mating contacts and operates across an extended temperature range of -55°C to 250°C. The part is currently discontinued at DiGi Electronics, making identification of equivalent substitutes necessary for ongoing system support and procurement.

Substiute Parts

FPG.00.302.CLAD17

LEMOIn Stock: 857FPG.00.302.CLAD17 Datasheet

Current PartRFQ

FPG.00.302.CLAD22

LEMOIn Stock: 733FPG.00.302.CLAD22 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FPG.00.302.CLAD17 is based on strict equivalence across the following critical parameters:

• Manufacturer and Series: LEMO Series 00 connectors maintain mechanical and electrical compatibility within the same series designation
• Connector Configuration: 2-position plug with male pins and solder cup termination
• Shell Size: 302 insert size ensures physical mating compatibility
• Electrical Characteristics: 4.6A current rating and gold-plated mating contacts
• Environmental Specifications: -55°C to 250°C operating temperature range and IP50 ingress protection
• Mechanical Features: Push-pull fastening, shielded design, and backshell configuration

The substitute part FPG.00.302.CLAD22 meets all these criteria and is classified as the manufacturer-recommended equivalent.

Parameter Comparison

Engineering Selection Recommendations

The FPG.00.302.CLAD22 is the direct substitute for the discontinued FPG.00.302.CLAD17. Both connectors are electrically and mechanically equivalent across all specified parameters. The FPG.00.302.CLAD22 offers the additional advantage of active product status, ensuring continued availability and supply chain reliability. The substitute part carries ROHS3 compliance certification, meeting current regulatory requirements for electronic component manufacturing. Current inventory of 657 pieces is available for the substitute part, compared to 833 pieces for the discontinued original.

Frequently Asked Questions (FAQ)

Q: Are FPG.00.302.CLAD17 and FPG.00.302.CLAD22 mechanically interchangeable?

A: Yes. Both connectors share identical shell size (302), connector type (2-position plug, male pins), fastening mechanism (push-pull), and termination method (solder cup). Physical mating and mounting compatibility is assured.

Q: Do these connectors have the same electrical ratings?

A: Yes. Both parts are rated for 4.6A current and operate across -55°C to 250°C. Gold-plated mating contacts and shielded design are identical.

Q: What is the difference between these two part numbers?

A: The primary difference is product status. FPG.00.302.CLAD17 is discontinued, while FPG.00.302.CLAD22 is active. The substitute part also carries ROHS3 compliance certification. All functional and electrical specifications remain equivalent.

Q: Can I use FPG.00.302.CLAD22 as a direct replacement in existing designs?

A: Yes. The substitute part meets all electrical, mechanical, and environmental specifications of the original. No design modifications are required.

Q: What cable opening specifications apply to these connectors?

A: FPG.00.302.CLAD22 specifies cable opening of 0.055" to 0.087" (1.40mm to 2.20mm). This parameter was not specified for the discontinued FPG.00.302.CLAD17.