FP11087_LISA2-RS-CLIP Equivalent & Substitute Parts

Part Overview

The FP11087_LISA2-RS-CLIP is a lens with holder assembly manufactured by Ledil, designed for single LED applications with a 16° spot optical pattern. This component features a clear acrylic construction with a 9.9mm diameter round flat-top lens profile and snap-in mounting compatibility. The part is classified as obsolete, necessitating identification of active equivalent alternatives to maintain supply chain continuity for applications requiring this optical specification.

Substiute Parts

FP11087_LISA2-RS-CLIP

LedilIn Stock: 654FP11087_LISA2-RS-CLIP Datasheet

Current PartRFQ

FP11086_LISA2-RS-CLIP

LedilIn Stock: 1127FP11086_LISA2-RS-CLIP Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FP11087_LISA2-RS-CLIP is determined by the following critical parameters:

Primary Compatibility Criteria:

• Manufacturer: Ledil
• Series: LISA2
• Lens Size: 9.9mm Dia
• Lens Style: Round with Flat Top
• Mounting Type: Snap-In
• Color: Clear
• Number of LEDs: 1
• Optical Pattern: Spot

Viewing Angle Compatibility: The FP11087_LISA2-RS-CLIP operates at a fixed 16° viewing angle. The substitute part FP11086_LISA2-RS-CLIP provides a variable viewing angle range of 16° ~ 24°, which encompasses the original specification. This range compatibility permits direct substitution where the 16° optical characteristic is required.

Regulatory & Environmental Compliance: Both parts maintain ROHS3 compliance, MSL rating of 1 (Unlimited), and REACH unaffected status, ensuring equivalent environmental and regulatory standing.

Parameter Comparison

Engineering Selection Recommendations

The FP11086_LISA2-RS-CLIP serves as the direct active substitute for the obsolete FP11087_LISA2-RS-CLIP. Selection of the substitute part is supported by the following factors:

Product Status Transition: The FP11087_LISA2-RS-CLIP is classified as obsolete, while the FP11086_LISA2-RS-CLIP maintains active product status, ensuring continued manufacturer support and supply availability.

Mechanical & Optical Compatibility: Both parts share identical mechanical specifications: 9.9mm diameter round flat-top lens profile, snap-in mounting interface, and single LED configuration. The substitute part's 16° ~ 24° viewing angle range includes the original 16° specification, maintaining optical performance for applications designed around the fixed 16° characteristic.

Regulatory Compliance Equivalence: Both parts maintain identical ROHS3 compliance, MSL rating of 1 (Unlimited), and REACH unaffected status. No regulatory or environmental qualification differences exist between the parts.

Supply Chain Continuity: The substitute part demonstrates significantly higher inventory availability (1111 Pcs versus 638 Pcs), supporting long-term supply chain stability for new designs and production requirements.

Frequently Asked Questions (FAQ)

Q: Can FP11086_LISA2-RS-CLIP directly replace FP11087_LISA2-RS-CLIP in existing applications?

A: Yes. Both parts share identical mechanical mounting interfaces (snap-in), lens diameter (9.9mm), lens style (round with flat top), and single LED configuration. The substitute part's 16° ~ 24° viewing angle range encompasses the original 16° specification.

Q: What is the primary difference between these two parts?

A: The FP11087_LISA2-RS-CLIP provides a fixed 16° viewing angle, while the FP11086_LISA2-RS-CLIP provides a variable 16° ~ 24° viewing angle range. The substitute part is active in production; the original part is obsolete.

Q: Are there packaging differences between the parts?

A: The FP11087_LISA2-RS-CLIP packaging is not specified. The FP11086_LISA2-RS-CLIP is supplied in bag packaging. Confirm packaging requirements with procurement specifications.

Q: Do both parts meet the same regulatory standards?

A: Yes. Both parts are ROHS3 compliant, carry MSL rating 1 (Unlimited), and are REACH unaffected. No regulatory differences exist.

Q: Which manufacturers' LEDs are these lenses compatible with?

A: The FP11087_LISA2-RS-CLIP is specified for Nichia LEDs. The FP11086_LISA2-RS-CLIP is compatible with both Lumileds and Nichia LEDs, providing broader LED manufacturer compatibility.

Q: Is material composition identical between the parts?

A: The FP11087_LISA2-RS-CLIP material is not specified in available documentation. The FP11086_LISA2-RS-CLIP is constructed from acrylic. Confirm material requirements for your application.