FP1007R1-R22-R Equivalent & Substitute Parts

Part Overview

The FP1007R1-R22-R is a 215 nH fixed unshielded drum core wirewound inductor manufactured by Eaton - Electronics Division. This surface mount component is rated for 60 A continuous current with a DC resistance of 0.29 mOhm and operates across the temperature range of -40°C to 125°C. The part is RoHS Compliant and carries an MSL rating of 1 (Unlimited). As an active product with 1682 pieces in stock, substitute parts may be required due to supply constraints, design optimization, or application-specific requirements.

Substiute Parts

FP1007R1-R22-R

Eaton - Electronics DivisionIn Stock: 1766FP1007R1-R22-R Datasheet

Current PartRFQ

PA2607.211NLT

Pulse ElectronicsIn Stock: 4905PA2607.211NLT Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FP1007R1-R22-R is determined by the following critical electrical and mechanical parameters:

Electrical Compatibility Criteria:

• Inductance value must equal 215 nH
• DC resistance must equal 0.29 mOhm
• Inductance tolerance must not exceed ±15%
• Current rating must be sufficient for the application (minimum 41 A for reduced-current applications)
• Saturation current must support the operating envelope

Mechanical Compatibility Criteria:

• Surface mount package type
• Nonstandard package dimensions within acceptable tolerance
• Height and footprint compatibility with PCB layout

Environmental & Compliance Criteria:

• Operating temperature range must cover or exceed -40°C to 125°C
• RoHS compliance status (RoHS Compliant or ROHS3 Compliant acceptable)
• MSL rating of 1 (Unlimited) for moisture sensitivity

The PA2607.211NLT from Pulse Electronics meets these substitution criteria with matching inductance and DCR values, though with a reduced current rating of 41 A and tighter tolerance of ±15%.

Parameter Comparison

Engineering Selection Recommendations

Primary Part: FP1007R1-R22-R (Eaton)

The FP1007R1-R22-R is the specified component with full current rating of 60 A, tighter inductance tolerance of ±10%, and unshielded construction. This part is RoHS Compliant and actively manufactured. Selection of this part is appropriate for applications requiring maximum current capacity and minimal inductance variation.

Substitute Part: PA2607.211NLT (Pulse Electronics)

The PA2607.211NLT is a qualified substitute for applications where current requirements do not exceed 41 A. This part maintains identical inductance (215 nH) and DC resistance (0.29 mOhm) values. The substitute offers an extended operating temperature range to 130°C and ROHS3 Compliant status. The shielded construction of the PA2607.211NLT differs from the unshielded primary part and may affect electromagnetic coupling characteristics in the circuit. Footprint dimensions are within acceptable tolerance for PCB layout compatibility.

Selection of the substitute part is appropriate for reduced-current applications where supply availability of the primary part is constrained and the shielded construction does not conflict with circuit design requirements.

Frequently Asked Questions (FAQ)

Q: Can the PA2607.211NLT replace the FP1007R1-R22-R in all applications?

A: The PA2607.211NLT is a suitable substitute only for applications where the continuous current requirement does not exceed 41 A. The primary part FP1007R1-R22-R is rated for 60 A. If your application requires the full 60 A current capacity, the primary part must be used. Both parts share identical inductance and DC resistance values.

Q: What is the difference between shielded and unshielded construction?

A: The FP1007R1-R22-R is unshielded, while the PA2607.211NLT is shielded. Shielding reduces electromagnetic radiation and susceptibility to external fields. In applications sensitive to EMI/RFI, the shielded substitute may provide improved performance. In applications where shielding is not required, both constructions are functionally equivalent for the specified inductance and resistance values.

Q: Are the physical dimensions compatible?

A: Yes. The FP1007R1-R22-R measures 10.20 x 7.80 mm (length x width) with a maximum height of 7.00 mm. The PA2607.211NLT measures 10.31 x 7.65 mm with a maximum height of 7.50 mm. These dimensions are within acceptable tolerance for standard PCB footprints and layout compatibility.

Q: What is the tolerance difference between these parts?

A: The FP1007R1-R22-R has an inductance tolerance of ±10%, while the PA2607.211NLT has a tolerance of ±15%. Both tolerances are measured at 100 kHz. For applications requiring tighter inductance control, the primary part with ±10% tolerance is preferred.

Q: Are both parts RoHS compliant?

A: Yes. The FP1007R1-R22-R is RoHS Compliant. The PA2607.211NLT is ROHS3 Compliant. Both meet RoHS requirements and are suitable for applications subject to RoHS regulations.

Q: What is the saturation current difference?

A: The FP1007R1-R22-R has a saturation current (Isat) of 50 A, while the PA2607.211NLT has an Isat of 48 A. Both values are comparable and indicate the current level at which inductance begins to degrade. For applications operating near saturation limits, verify that the selected part's Isat rating exceeds the maximum expected current.