FODM1007R2V Equivalent & Substitute Parts

Part Overview

The FODM1007R2V is an optoisolator with transistor output manufactured by onsemi, designed for high-voltage isolation applications. This single-channel device provides 5000Vrms isolation with a 4-SOP surface mount package. The part is currently active in production with full RoHS3 compliance and unlimited moisture sensitivity rating.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across isolation voltage, current transfer ratio, output specifications, and package configuration. Alternative part numbers within the same product family enable procurement flexibility and inventory optimization while preserving circuit performance.

Substiute Parts

FODM1007R2V

onsemiIn Stock: 987FODM1007R2V Datasheet

Current PartRFQ

FODM1007R2

onsemiIn Stock: 9079FODM1007R2 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FODM1007R2V are identified based on strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

• Isolation voltage: 5000Vrms
• Number of channels: 1
• Current transfer ratio range: 80% to 160% @ 5mA
• Output type: Transistor
• Maximum output voltage: 70V
• Maximum output current: 50mA
• Vce saturation: 300mV maximum
• Rise and fall time specifications: 5.7µs and 8.5µs

Mechanical Equivalence Criteria:

• Package type: 4-SMD, Gull Wing
• Supplier device package: 4-SOP
• Mounting type: Surface Mount

Compliance Criteria:

• Product status: Active
• RoHS3 compliance required
• Moisture sensitivity level: 1 (Unlimited)

The FODM1007R2 meets all specified parameters and qualifies as a direct parametric equivalent for the FODM1007R2V within the onsemi optoisolator product family.

Parameter Comparison

Engineering Selection Recommendations

Both the FODM1007R2V and FODM1007R2 are active production parts manufactured by onsemi with identical electrical and mechanical specifications. Selection between these parts is based on availability and procurement requirements rather than functional differences.

FODM1007R2V is suitable for applications requiring the specific part number designation with current inventory of 944 pieces.

FODM1007R2 provides equivalent functionality with higher inventory availability of 9000 pieces, supporting applications with larger volume requirements or extended lead time considerations.

Both parts maintain full RoHS3 compliance, unlimited moisture sensitivity rating (MSL 1), and identical performance across isolation voltage, current transfer ratio, output characteristics, and operating temperature range. Surface mount assembly processes and PCB layout requirements are identical for both variants.

Frequently Asked Questions (FAQ)

Q: Can FODM1007R2 be used as a direct replacement for FODM1007R2V?

A: Yes. Both parts share identical electrical specifications including 5000Vrms isolation, 80-160% current transfer ratio, 70V maximum output voltage, and 50mA output current. Package configuration, mounting type, and operating temperature range are equivalent. Both maintain active production status and RoHS3 compliance.

Q: Are there differences in the 4-SOP package between these parts?

A: No. Both parts use identical 4-SMD, Gull Wing package configuration with surface mount mounting type. PCB footprints and assembly requirements are the same.

Q: What is the significance of the part number suffix in FODM1007R2V versus FODM1007R2?

A: Both part numbers reference the same base product (FODM1007) with identical parametric specifications. The suffix designations do not indicate functional differences in the provided electrical or mechanical parameters.

Q: Are compliance certifications identical between these parts?

A: Yes. Both parts are RoHS3 compliant, REACH unaffected, and carry MSL 1 (unlimited) moisture sensitivity rating. ECCN and HTSUS classifications are identical.

Q: What factors should determine part selection between FODM1007R2V and FODM1007R2?

A: Selection is based on inventory availability, procurement lead times, and supplier stock levels. The FODM1007R2 maintains higher inventory (9000 pieces) compared to FODM1007R2V (944 pieces). Electrical and mechanical performance are equivalent for all circuit applications.

Q: Are rise and fall time specifications identical?

A: Yes. Both parts specify 5.7µs rise time and 8.5µs fall time, ensuring equivalent switching performance in isolation circuits.