FOD3181 Equivalent & Substitute Parts

Part Overview

The FOD3181 is a 1.5A gate driver optical coupler manufactured by onsemi, providing 5000Vrms isolation for single-channel gate drive applications. This component features optical coupling technology with a maximum propagation delay of 500ns and operates across a -20°C to 85°C temperature range. The FOD3181 is classified as obsolete, making identification of functionally compatible alternatives essential for ongoing system support and new design implementations.

Substiute Parts

FOD3181

onsemiIn Stock: 1610FOD3181 Datasheet

Current PartRFQ

FOD3180

onsemiIn Stock: 103016FOD3180 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The FOD3180 qualifies as a direct substitute for the FOD3181 based on the following critical parameters:

• Isolation Voltage: Both parts maintain 5000Vrms isolation, meeting identical system voltage requirements
• Channel Configuration: Both are single-channel gate drivers (1 channel)
• Package Type: Both use 8-DIP (0.300", 7.62mm) through-hole packaging, ensuring mechanical and electrical compatibility
• Output Supply Voltage: Both operate within 10V ~ 20V range
• Mounting Type: Both are through-hole components with identical pin configurations
• Manufacturer: Both are onsemi products within the FOD318 base product family

The FOD3180 exceeds the FOD3181 specifications in peak output current (2.5A vs 1.5A), propagation delay performance (200ns vs 500ns), and common mode transient immunity (15kV/µs vs 10kV/µs), making it a capable replacement for applications requiring the FOD3181.

Parameter Comparison

Engineering Selection Recommendations

The FOD3180 is the appropriate substitute for FOD3181 applications. The FOD3180 maintains active product status with onsemi, ensuring ongoing availability and support. Both components carry identical regulatory approvals (cUL, UL) and REACH compliance status, satisfying equivalent compliance requirements.

The FOD3180 provides enhanced electrical performance across multiple parameters: higher peak output current capacity (2.5A), faster propagation delay (200ns), and superior common mode transient immunity (15kV/µs). These improvements ensure the FOD3180 operates within or exceeds the electrical envelope of the FOD3181 for gate driver applications.

The FOD3180 supports an extended operating temperature range (-40°C to 100°C) compared to the FOD3181 (-20°C to 85°C), providing additional thermal margin for demanding environments. Identical package geometry and through-hole mounting ensure direct mechanical compatibility without PCB redesign.

Frequently Asked Questions (FAQ)

Q: Can FOD3180 directly replace FOD3181 without PCB modifications?

A: Yes. Both components use identical 8-DIP (0.300", 7.62mm) through-hole packaging with the same pin configuration. No PCB layout changes are required for mechanical or electrical substitution.

Q: What are the key differences between FOD3181 and FOD3180?

A: The FOD3180 provides higher peak output current (2.5A vs 1.5A), faster propagation delay (200ns vs 500ns), and greater common mode transient immunity (15kV/µs vs 10kV/µs). The FOD3180 also supports a wider operating temperature range (-40°C to 100°C vs -20°C to 85°C) and maintains active product status.

Q: Are regulatory certifications equivalent between FOD3181 and FOD3180?

A: Yes. Both components carry cUL and UL approvals and maintain identical REACH compliance status (REACH Unaffected). Regulatory requirements are satisfied by either component.

Q: Why is FOD3181 obsolete?

A: The FOD3181 is classified as obsolete by onsemi. The FOD3180 represents the current active product within the FOD318 gate driver family and is the recommended solution for new designs and legacy system support.

Q: Does the FOD3180 require different circuit design considerations?

A: No. The FOD3180 operates within the same output supply voltage range (10V ~ 20V) and maintains compatible isolation voltage (5000Vrms) and channel configuration (1 channel). Circuit design parameters remain unchanged.