FN9263S-6-06 Equivalent & Substitute Parts

Part Overview

The FN9263S-6-06 is a power entry connector receptacle module manufactured by Schaffner EMC Inc., designed for IEC 320-C14 panel mount applications. This component features filtered EMI/RFI protection rated at 6A with an integrated on-off switch, snap-in mounting, and quick connect termination. The part is classified as obsolete, necessitating identification of active equivalent models to maintain supply chain continuity for applications requiring this connector style and electrical specification.

Substiute Parts

FN9263S-6-06

Schaffner EMC Inc.In Stock: 1101FN9263S-6-06 Datasheet

Current PartRFQ

FN9264S-6-06

Schaffner EMC Inc.In Stock: 1158FN9264S-6-06 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FN9263S-6-06 is determined by strict equivalence across the following critical parameters:

Connector electrical interface: IEC 320-C14 receptacle configuration with male blades and 3-position module design Filtering and current capacity: Commercial-grade EMI/RFI filtering at 6A rating Switching functionality: Integrated on-off switch Mounting and termination: Panel mount snap-in installation with 0.250" (6.3mm) quick connect terminals Safety and compliance: UL94 V-2 flammability rating, IP40 ingress protection, and multi-agency approval (CQC, CSA, ENEC, UL) Environmental compliance: ROHS3 compliance and REACH unaffected status

The FN9264S-6-06 qualifies as a direct substitute based on identical electrical specifications, connector style, filtering characteristics, and regulatory compliance. Mechanical variations in panel cutout dimensions and panel thickness tolerance ranges reflect design refinements in the active product line and do not affect functional compatibility in standard applications.

Parameter Comparison

Engineering Selection Recommendations

The FN9264S-6-06 is the designated substitute for the obsolete FN9263S-6-06. Both components maintain identical electrical and functional specifications, including IEC 320-C14 connector interface, 6A filtered current capacity, on-off switching, and multi-agency regulatory approvals (CQC, CSA, ENEC, UL). Both parts are ROHS3 compliant and REACH unaffected.

The primary distinction is product status: FN9263S-6-06 is obsolete with 1020 units in stock, while FN9264S-6-06 is active with 1070 units available. The FN9264S-6-06 represents the current production equivalent and is the recommended selection for new designs and ongoing supply requirements.

Panel cutout and thickness tolerance variations between the two models reflect design evolution. Existing panel installations designed for FN9263S-6-06 dimensions (29.00mm x 32.60mm cutout, 0.60mm–1.50mm panel thickness) require mechanical verification before substitution with FN9264S-6-06 (29.50mm x 33.00mm cutout, 1.00mm–2.50mm panel thickness). The FN9264S-6-06 accommodates thicker panels and requires slightly larger cutout dimensions.

Frequently Asked Questions (FAQ)

Q: Can FN9264S-6-06 directly replace FN9263S-6-06 in existing applications?

A: Electrical and functional compatibility is complete. Mechanical compatibility depends on panel cutout dimensions and thickness. Verify that existing panel installations accommodate the FN9264S-6-06 cutout size (29.50mm x 33.00mm) and panel thickness range (1.00mm–2.50mm) before substitution.

Q: What are the key electrical parameters that define substitution eligibility?

A: Connector style (IEC 320-C14), connector type (receptacle with male blades), filter type (commercial EMI/RFI), current rating (6A), switch functionality (on-off), and termination method (0.250" quick connect) must remain identical. Both parts meet these criteria.

Q: Are there differences in regulatory compliance between these parts?

A: No. Both FN9263S-6-06 and FN9264S-6-06 carry identical approvals (CQC, CSA, ENEC, UL), flammability rating (UL94 V-2), ingress protection (IP40), and environmental compliance (ROHS3, REACH unaffected).

Q: Why does FN9264S-6-06 have different panel thickness tolerances?

A: The panel thickness range difference (0.60mm–1.50mm versus 1.00mm–2.50mm) reflects design refinement in the active product line. FN9264S-6-06 supports a broader range of panel thicknesses, accommodating thicker installation materials.

Q: What is the packaging difference between these parts?

A: FN9263S-6-06 packaging is not specified. FN9264S-6-06 is supplied in tray packaging. Confirm packaging requirements for your procurement and assembly processes.