FN9263-10-06 Equivalent & Substitute Parts

Part Overview

The FN9263-10-06 is a Power Entry Connector Receptacle module manufactured by Schaffner EMC Inc., designed for IEC 320-C14 panel mount applications. This component features filtered EMI/RFI protection rated at 10A with an on-off switch, quick connect termination, and IP40 ingress protection. The part is classified as Not For New Designs, making identification of functionally equivalent alternatives essential for ongoing maintenance, repair, and legacy system support.

Substiute Parts

FN9263-10-06

Schaffner EMC Inc.In Stock: 1019FN9263-10-06 Datasheet

Current PartRFQ

FN9264-10-06

Schaffner EMC Inc.In Stock: 2293FN9264-10-06 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FN9263-10-06 is determined by strict equivalence across the following critical parameters:

Connector Style and Type: Both the main part and substitute must conform to IEC 320-C14 receptacle configuration with male blades in module format.

Electrical Specifications: Current rating of 10A with filtered EMI/RFI protection at commercial grade is mandatory.

Mechanical Interface: Panel mount flange configuration with quick connect 0.250" (6.3mm) termination ensures physical and electrical compatibility.

Safety and Compliance: UL94 V-2 material flammability rating, IP40 ingress protection, and multi-agency approval (CQC, CSA, ENEC, UL) are required.

Environmental Compliance: ROHS3 compliance and REACH unaffected status must be maintained.

The FN9264-10-06 meets all substitution criteria and is classified as an active, functionally equivalent alternative.

Parameter Comparison

Engineering Selection Recommendations

The FN9264-10-06 is the primary equivalent substitute for the FN9263-10-06. Both components share identical electrical, mechanical, and safety specifications across all critical parameters. The FN9264-10-06 holds Active product status, making it the preferred selection for new applications and ongoing system support where the FN9263-10-06 is no longer available.

Panel cutout dimensions differ marginally (FN9263-10-06: 29.20mm x 33.20mm; FN9264-10-06: 29.00mm x 33.00mm). This 0.2mm variance in each dimension is within standard manufacturing tolerances for panel mount applications and does not affect functional compatibility or electrical performance.

Both parts maintain full compliance with CQC, CSA, ENEC, and UL certifications, ensuring regulatory acceptance across global markets. ROHS3 compliance and REACH unaffected status are equivalent, supporting environmental and supply chain requirements.

Frequently Asked Questions (FAQ)

Q: Can the FN9264-10-06 directly replace the FN9263-10-06 in existing installations?

A: Yes. Both components are electrically and mechanically equivalent across all functional parameters. The FN9264-10-06 maintains identical current rating (10A), filter type (EMI/RFI commercial), connector configuration (IEC 320-C14 receptacle), and safety certifications. Panel cutout dimensions differ by 0.2mm per side, which is within standard manufacturing tolerance and does not affect installation compatibility.

Q: What is the significance of the product status difference between these parts?

A: The FN9263-10-06 is classified as Not For New Designs, indicating Schaffner EMC Inc. has discontinued active development and recommends the FN9264-10-06 for new applications. The FN9264-10-06 maintains Active status with higher inventory availability (2200 pcs vs. 924 pcs), ensuring long-term supply continuity.

Q: Are the quick connect terminations identical between both parts?

A: Yes. Both the FN9263-10-06 and FN9264-10-06 use Quick Connect - 0.250" (6.3mm) termination, ensuring direct compatibility with existing wiring harnesses and connector interfaces.

Q: Do both parts meet the same regulatory and compliance standards?

A: Yes. Both components are approved by CQC, CSA, ENEC, and UL, with UL94 V-2 material flammability rating and IP40 ingress protection. ROHS3 compliance and REACH unaffected status are identical, supporting equivalent regulatory acceptance.

Q: What is the practical impact of the panel cutout dimension difference?

A: The FN9264-10-06 panel cutout (29.00mm x 33.00mm) is 0.2mm smaller in each dimension compared to the FN9263-10-06 (29.20mm x 33.20mm). This difference is negligible for standard panel mount applications and falls within typical manufacturing tolerances. Existing panel cutouts designed for the FN9263-10-06 will accommodate the FN9264-10-06 without modification.