FN9222R-8-06 Equivalent & Substitute Parts

Part Overview

The FN9222R-8-06 is an AC power entry connector receptacle manufactured by Schaffner EMC Inc. It features IEC 320-C14 male blade configuration with integrated EMI/RFI filtering for commercial applications. The connector is designed for panel mount installation with flange mounting and quick connect termination. This part is currently active in production with 873 units in stock.

Substitute parts are identified when equivalent electrical and mechanical parameters are met, enabling direct replacement in applications where the original part becomes unavailable or when inventory constraints require alternative sourcing.

Substiute Parts

FN9222R-8-06

Schaffner EMC Inc.In Stock: 887FN9222R-8-06 Datasheet

Current PartRFQ

B84771A0008A000

EPCOS - TDK ElectronicsIn Stock: 753B84771A0008A000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for AC power entry connectors is determined by strict alignment of electrical and mechanical parameters. The FN9222R-8-06 establishes the baseline specification set.

Critical substitution parameters:

• Connector Style & Type: IEC 320-C14 receptacle with male blades (non-negotiable for physical and electrical compatibility)
• Filter Configuration: EMI/RFI filtered, commercial grade (maintains electromagnetic compliance requirements)
• Current Rating: Filter rated at 10.6A minimum (ensures thermal and electrical safety margins)
• Mounting Configuration: Panel mount with flange (determines mechanical fit and installation method)
• Termination Method: Quick connect 0.250" (6.3mm) (ensures compatibility with existing wiring harnesses)
• Ingress Protection: IP40 minimum (maintains environmental sealing specification)
• Regulatory Compliance: CE, CSA, ENEC, UL certifications (ensures market approval and safety standards)

The substitute part B84771A0008A000 meets all critical parameters within acceptable tolerances for direct replacement applications.

Parameter Comparison

Engineering Selection Recommendations

Primary Part: FN9222R-8-06

Use the FN9222R-8-06 when:

• Applications require current ratings up to 10.6A
• CQC certification is mandated by regional compliance requirements
• Original equipment manufacturer (OEM) specifications explicitly call for Schaffner EMC components
• Inventory availability supports project timelines

Substitute Part: B84771A0008A000

Use B84771A0008A000 when:

• Application current requirements do not exceed 8A
• CSA, cUL, ENEC, and UL certifications satisfy regional compliance requirements
• CQC certification is not a project requirement
• ROHS3 compliance documentation is required for end-product certification
• EPCOS - TDK Electronics supply chain availability is preferred

Both parts carry active product status and maintain equivalent mechanical and electrical compatibility for IEC 320-C14 panel mount power entry applications with commercial-grade EMI/RFI filtering.

Frequently Asked Questions (FAQ)

Q: Can B84771A0008A000 replace FN9222R-8-06 in all applications?

A: B84771A0008A000 is compatible with applications drawing 8A or less. If your application requires current capacity between 8A and 10.6A, the FN9222R-8-06 is the appropriate selection. Both parts share identical IEC 320-C14 connector geometry, panel cutout dimensions, and mounting configuration.

Q: What is the difference in current rating between these parts?

A: FN9222R-8-06 is rated at 10.6A; B84771A0008A000 is rated at 8A. This difference reflects the filter component specifications. Select based on your application's actual current draw.

Q: Are the panel cutout dimensions identical?

A: FN9222R-8-06 specifies rectangular cutout dimensions of 28.50mm x 21.50mm. B84771A0008A000 lists panel cutout dimensions as variable size. Verify mechanical fit during design phase if panel modifications have already been completed.

Q: Which certifications does each part carry?

A: FN9222R-8-06 carries CE, CQC, CSA, ENEC, and UL approvals. B84771A0008A000 carries CSA, cUL, ENEC, and UL approvals. If CQC certification is required for your market, use FN9222R-8-06.

Q: What is the quick connect termination specification?

A: Both parts use quick connect termination with 0.250" (6.3mm) blade width. This ensures compatibility with standard power entry harnesses and wiring assemblies designed for IEC 320-C14 connectors.

Q: Do both parts support front and rear panel mounting?

A: Yes. Both FN9222R-8-06 and B84771A0008A000 feature front or rear side mount capability, providing installation flexibility for different equipment enclosure designs.

Q: What is the ingress protection rating?

A: Both parts are rated IP40, providing protection against solid objects larger than 1mm and splash water from any direction.

Q: Is RoHS compliance required for my application?

A: B84771A0008A000 is explicitly ROHS3 compliant. FN9222R-8-06 RoHS status is not specified in available documentation. If ROHS3 compliance documentation is required for end-product certification, B84771A0008A000 provides this assurance.