FN9222-10-06 Equivalent & Substitute Parts

Part Overview

The FN9222-10-06 is an AC power entry connector receptacle manufactured by Schaffner EMC Inc., designed for IEC 320-C14 panel mount applications. This filtered power entry module integrates EMI/RFI filtering at the appliance inlet, providing commercial-grade electromagnetic compatibility protection. The product is currently active in production with 10,200 units in stock. Substitute parts are identified based on matching electrical specifications, connector interface standards, and filtering characteristics that enable direct functional replacement in equivalent circuit configurations.

Substiute Parts

FN9222-10-06

Schaffner EMC Inc.In Stock: 10224FN9222-10-06 Datasheet

Current PartRFQ

B84771C0010A000

EPCOS - TDK ElectronicsIn Stock: 863B84771C0010A000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FN9222-10-06 is determined by the following critical parameters:

• Connector Interface: IEC 320-C14 standard with Quick Connect termination (0.250" / 6.3mm)
• Electrical Rating: 10A current capacity at 250VAC nominal operating voltage
• Filtering Specification: EMI/RFI filtering capability for commercial applications
• Mounting Configuration: Panel mount design with compatible flange geometry
• Regulatory Compliance: UL, ENEC, and CSA certifications for safety and electromagnetic compatibility

The substitute part B84771C0010A000 meets these criteria as a single-phase EMC/EMI line filter with identical current rating (10A), voltage rating (250VAC), connector type (IEC 320-C14), and termination style (Quick Connect). Both parts operate at 50/60Hz and maintain equivalent filtering performance for power entry applications.

Parameter Comparison

Engineering Selection Recommendations

Both the FN9222-10-06 and B84771C0010A000 are active production components with equivalent electrical specifications for 10A, 250VAC power entry filtering applications. Selection between these parts should be based on:

Regulatory Compliance: The FN9222-10-06 carries CQC, CSA, ENEC, and UL certifications, while the B84771C0010A000 carries cUL, ENEC, and UL certifications. Verify that the required certification set for your target market is present on the selected part.

Mechanical Integration: The FN9222-10-06 specifies panel cutout dimensions (28.50mm x 21.50mm) and flange mounting, while the B84771C0010A000 is listed as panel mount without detailed dimensional specifications. Confirm mechanical compatibility with your enclosure design before substitution.

Environmental Requirements: The B84771C0010A000 provides an explicit operating temperature range (-25°C ~ 85°C), which may be relevant for applications with temperature-sensitive environments. The FN9222-10-06 does not specify this parameter.

Material Specifications: The FN9222-10-06 explicitly states UL94 V-2 flammability rating. Verify that the B84771C0010A000 meets equivalent material safety requirements for your application.

Both parts maintain ROHS3 compliance and are suitable for direct electrical substitution in IEC 320-C14 filtered power entry circuits.

Frequently Asked Questions (FAQ)

Q: Can the B84771C0010A000 directly replace the FN9222-10-06 in my application?

A: Direct replacement is possible if your application requires 10A, 250VAC, IEC 320-C14 filtered power entry with Quick Connect termination. Verify that all required certifications (CQC, CSA, ENEC, UL) are present on the substitute part for your target market. Confirm mechanical compatibility with your panel cutout dimensions before installation.

Q: What are the key electrical parameters that determine substitution compatibility?

A: The critical parameters are current rating (10A), voltage rating (250VAC), connector standard (IEC 320-C14), termination type (Quick Connect 0.250"), and filter classification (EMI/RFI commercial grade). Both parts match these specifications.

Q: Are there differences in packaging between these parts?

A: The FN9222-10-06 is supplied in Tray packaging with 10,200 units in stock. The B84771C0010A000 is supplied in Bulk packaging with 811 units in stock. Verify packaging requirements for your procurement and logistics processes.

Q: Do both parts meet the same regulatory standards?

A: Both parts carry UL and ENEC certifications. The FN9222-10-06 additionally carries CQC and CSA certifications, while the B84771C0010A000 carries cUL certification. Confirm that your application requirements are satisfied by the certification set of your selected part.

Q: What is the difference between the filter types listed for these parts?

A: The FN9222-10-06 is classified as "Filtered (EMI, RFI) - Commercial" while the B84771C0010A000 is classified as "Single Phase EMC/EMI Line Filter." Both provide equivalent EMI/RFI filtering for commercial power entry applications at 10A capacity.

Q: Are there any mechanical considerations for substitution?

A: The FN9222-10-06 specifies panel cutout dimensions of 28.50mm x 21.50mm with flange mounting. The B84771C0010A000 is listed as panel mount without detailed dimensional specifications. Obtain complete mechanical drawings for the B84771C0010A000 and verify compatibility with your enclosure design before substitution.