FN385-6-.. AC Power Entry Connector Equivalent & Substitute Parts

Part Overview

The FN385-6-.. is an AC power entry connector module manufactured by Schaffner EMC Inc., designed as a receptacle with male blades conforming to the IEC 320-C14 standard. This component functions as a filtered power inlet for commercial applications, integrating EMI/RFI filtering with a 6A current rating and fuse accommodation capability. The product is classified as "Not For New Designs," making identification of functionally equivalent alternatives essential for ongoing maintenance, repair, and legacy system support.

Substiute Parts

FN385-6-..

Schaffner EMC Inc.In Stock: 818FN385-6-.. Datasheet

Current PartRFQ

06AK2

Delta ElectronicsIn Stock: 89106AK2 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FN385-6-.. is determined by strict alignment with the following core parameters:

• Connector Standard Compliance: Must conform to IEC 320-C14 specification
• Connector Type: Must be Receptacle, Male Blades - Module configuration
• Filtering Capability: Must include EMI/RFI filtering for commercial applications
• Current Rating: Must support minimum 6A filter current rating
• Mounting Configuration: Must support Panel Mount, Snap-In installation
• Fuse Accommodation: Must accommodate fuse installation
• Regulatory Compliance: Must hold CSA, UL, and VDE approvals
• Environmental Classification: Must maintain RoHS3 compliance

The substitute part 06AK2 (Delta Electronics) satisfies all mandatory substitution criteria within these parameters.

Parameter Comparison

Engineering Selection Recommendations

The 06AK2 (Delta Electronics) qualifies as a direct functional substitute for the FN385-6-.. based on electrical and mechanical parameter alignment. Both components meet identical IEC 320-C14 specifications, maintain 6A filter current ratings, and hold equivalent regulatory certifications (CSA, UL, VDE). Both are RoHS3 compliant and accommodate fuse installation.

The primary engineering consideration is termination method: the FN385-6-.. uses Solder Eyelet termination, while the 06AK2 employs Quick Connect termination. This difference requires circuit board layout and assembly process evaluation during integration.

Panel thickness accommodation ranges differ slightly. The FN385-6-.. supports 0.031" to 0.126" (0.79mm to 3.20mm), while the 06AK2 supports 0.040" to 0.070" (1.02mm to 1.78mm). Panel thickness must fall within the 06AK2 range (1.02mm to 1.78mm) for mechanical compatibility.

The 06AK2 carries Active product status, ensuring ongoing availability and support compared to the FN385-6-.. "Not For New Designs" classification.

Frequently Asked Questions (FAQ)

Q: Can the 06AK2 directly replace the FN385-6-.. without circuit modifications?

A: Electrical substitution is valid. However, termination method differs (Quick Connect vs. Solder Eyelet), requiring assembly process adaptation. Panel thickness must fall within 1.02mm to 1.78mm range.

Q: Are regulatory certifications equivalent between these parts?

A: Both components hold identical approvals: CSA, UL, and VDE. Both maintain RoHS3 compliance and REACH Unaffected status.

Q: What is the significance of the "Not For New Designs" status on the FN385-6-.."?

A: This designation indicates the manufacturer no longer recommends this part for new product development. The 06AK2 (Active status) is the appropriate selection for ongoing applications.

Q: Does the 06AK2 include a fuse holder?

A: Yes, the 06AK2 includes a Fuse Holder, Drawer feature. The FN385-6-.. accommodates a fuse but does not specify fuse holder inclusion.

Q: What packaging differences exist between these parts?

A: The FN385-6-.. is supplied in Tray packaging (742 pcs available). The 06AK2 is supplied in Bulk packaging (823 pcs available). Packaging format may affect procurement and handling procedures.

Q: Are there additional substitute options beyond the 06AK2?

A: The 06AK2 data references secondary substitutes (862-06/002, 8-6609107-7). These require independent verification against the FN385-6-.. parameter set for compatibility confirmation.