FN1600045 Equivalent & Substitute Parts

Part Overview

The FN1600045 is a 16 MHz crystal oscillator manufactured by Diodes Incorporated, part of the SaRonix-eCera™ FN series. This CMOS oscillator operates at 3.3V with enable/disable functionality and is housed in a 4-SMD, No Lead package. The device is currently in active production status with 791 units in stock. Alternative equivalent parts may be required due to supply constraints, design flexibility, or procurement optimization across manufacturing facilities.

Substiute Parts

FN1600045

Diodes IncorporatedIn Stock: 813FN1600045 Datasheet

Current PartRFQ

SXO75C3A481-16.000M

Suntsu Electronics, Inc.In Stock: 2441SXO75C3A481-16.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The SXO75C3A481-16.000M from Suntsu Electronics, Inc. qualifies as a direct equivalent based on the following critical parameters:

• Frequency Match: Both parts operate at 16 MHz
• Output Configuration: Both provide CMOS output
• Supply Voltage: Both require 3.3V operation
• Enable/Disable Function: Both include enable/disable capability
• Frequency Stability: Both maintain ±50ppm stability
• Operating Temperature: Both support -40°C ~ 85°C range
• Package Compatibility: Both use 4-SMD, No Lead housing with identical 7.00mm x 5.00mm footprint
• Regulatory Compliance: Both are ROHS3 compliant and carry EAR99 ECCN classification

Parameter Comparison

Engineering Selection Recommendations

Both the FN1600045 and SXO75C3A481-16.000M are active production parts with full ROHS3 compliance and EAR99 classification. The SXO75C3A481-16.000M offers a lower seated height (1.60mm vs. 1.80mm) and marginally higher supply current specification (16mA vs. 15mA), both of which remain within acceptable design tolerances for standard applications. Selection between these parts should be based on availability, procurement lead times, and cost considerations, as all critical electrical and mechanical parameters are equivalent.

Frequently Asked Questions (FAQ)

Q: Can the SXO75C3A481-16.000M be used as a direct replacement for the FN1600045 in existing designs?

A: Yes. Both parts share identical frequency, output type, supply voltage, enable/disable function, frequency stability, operating temperature range, and package footprint. The physical dimensions and electrical specifications are compatible for direct PCB substitution.

Q: Are there any height clearance concerns when substituting the SXO75C3A481-16.000M?

A: The SXO75C3A481-16.000M has a lower seated height (1.60mm) compared to the FN1600045 (1.80mm). This difference presents no compatibility issues and may provide additional clearance in space-constrained designs.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both parts are ROHS3 compliant, carry EAR99 ECCN classification, and share identical HTSUS codes (8542.39.0001), confirming equivalent regulatory status.

Q: What is the difference in supply current between these parts?

A: The FN1600045 specifies a maximum supply current of 15mA, while the SXO75C3A481-16.000M specifies 16mA. This 1mA difference is negligible for most applications and does not affect circuit design or power budget calculations.

Q: Are both parts available in the same packaging format?

A: Yes. Both parts use 4-SMD, No Lead packaging with identical 7.00mm x 5.00mm footprints, ensuring compatibility with existing PCB layouts and assembly processes.