Equivalent & Substitute Parts Reference for FMW-4306

Part Overview

The FMW-4306, manufactured by Sanken Electric USA Inc., is a diode array in the Diodes, Rectifiers category. It features a Schottky configuration with 1 pair common cathode, a maximum reverse voltage of 60 V, and an average rectified current of 15A per diode. This product is packaged in a TO-220-3 Full Pack, designed for through hole mounting, and is currently an active product. Engineering substitution is necessary in cases of supply chain limitations, procurement flexibility, or alternate sourcing requirements, while maintaining compliance within defined electrical and mechanical parameters.

Substiute Parts

FMW-4306

Sanken Electric USA Inc.In Stock: 1395FMW-4306 Datasheet

Current PartRFQ

DSTF3060C

Littelfuse Inc.In Stock: 17700DSTF3060C Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FMW-4306 are grouped strictly based on the following allowed parameters:

• Diode configuration: 1 Pair Common Cathode
• Technology: Schottky
• Voltage - DC Reverse (Vr) (Max): 60 V
• Current - Average Rectified (Io) (per Diode): 15A
• Voltage - Forward (Vf) (Max) @ If: 700 mV @ 15 A
• Speed: Fast Recovery =< 500ns, > 200mA (Io)
• Package / Case: TO-220-3 Full Pack or equivalent
• Mounting Type: Through Hole
• RoHS and compliance status

Only parts matching every specified electrical and mechanical parameter are included as substitutes.

Parameter Comparison

Engineering Selection Recommendations

Both FMW-4306 and DSTF3060C are active status diode array products with RoHS compliance, identical rectification and voltage characteristics, and matching through hole mounting and package form factors. Moisture Sensitivity Level meets the same criteria for both parts. Selection between these parts can be made based on product status, compliance, and certifications, in accordance with procurement and supply chain requirements.

Frequently Asked Questions (FAQ)

Q1: What parameters are used to determine direct substitutes for FMW-4306?
A1: Direct substitutes must match diode configuration, technology, reverse voltage rating, average rectified current, forward voltage, speed, mounting type, and package type.

Q2: Is package compatibility important in these substitutions?
A2: Yes. Only diodes arrays in a TO-220-3 Full Pack or equivalent package with through hole mounting are considered compatible.

Q3: Are there differences in RoHS or MSL compliance between FMW-4306 and DSTF3060C?
A3: Both parts conform to RoHS and MSL 1 (Unlimited) criteria.

Q4: Can alternate diode arrays be substituted if they match only some parameters?
A4: No. Substitution is limited strictly to parts matching all key provided electrical and mechanical parameters.

Q5: How does reverse leakage current affect compatibility?
A5: Reverse leakage at rated voltage is listed in the parameter comparison; substitution is only allowed within the specified parameters provided.