FMPOMRSXMAQ Equivalent & Substitute Parts

Part Overview

The FMPOMRSXMAQ is a Fiber Optic Plug Connector manufactured by Panduit Corp, classified as an MPO Splice-On Connector in the Male configuration. This duplex connector is designed for multimode fiber optic applications supporting OM3 and OM4 standards with a 50µm core diameter and 125µm cladding diameter. The connector features a push-pull fastening mechanism, aqua housing, dust cap, and strain relief. The product is currently listed as obsolete, necessitating identification of equivalent alternatives for ongoing system maintenance and new installations.

Substiute Parts

FMPOMRSXMAQ

Panduit CorpIn Stock: 1230FMPOMRSXMAQ Datasheet

Current PartRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FMPOMRSXMAQ requires strict alignment with the following critical parameters:

Connector Architecture Parameters:

• Connector Style: MPO
• Connector Type: Plug
• Simplex/Duplex Configuration: Duplex

Fiber Specifications:

• Mode: Multimode OM3, OM4
• Fiber Core Diameter: 50µm
• Fiber Cladding Diameter: 125µm

Mechanical and Operational Parameters:

• Mounting Type: Free Hanging (In-Line)
• Fastening Type: Push-Pull
• Housing Color: Aqua
• Features: Dust Cap, Strain Relief

Performance Specifications:

• Attenuation: -0.35dB (typical)
• Reflection: -20dB

Compliance Requirements:

• RoHS3 Compliant
• REACH Unaffected

Substitute parts must match all architectural parameters (MPO style, plug type, duplex configuration), fiber specifications (50µm core, 125µm cladding, OM3/OM4 multimode), and mechanical characteristics (push-pull fastening, free hanging mounting, aqua housing with dust cap and strain relief). Performance specifications and compliance certifications must be equivalent or superior.

Parameter Comparison

No manufacturer-recommended substitute parts have been provided in the input data. Equivalent alternatives must be sourced from active product lines of Panduit Corp or other qualified manufacturers offering MPO Duplex Plug Connectors with identical specifications for 50µm multimode fiber in OM3/OM4 applications.

Engineering Selection Recommendations

The FMPOMRSXMAQ is classified as an obsolete product. Selection of substitute components must prioritize:

Compliance Verification: Substitute parts must maintain ROHS3 compliance and REACH unaffected status to ensure regulatory alignment with current environmental and hazardous substance directives.

Connector Compatibility: MPO Duplex Plug Connectors designated for 50µm multimode fiber (OM3/OM4) are functionally interchangeable when all architectural parameters are identical. The push-pull fastening mechanism and aqua housing color are critical for mechanical and visual compatibility in existing installations.

Performance Continuity: Substitute connectors must achieve attenuation specifications of -0.35dB or better and reflection specifications of -20dB or better to maintain signal integrity in multimode fiber optic systems.

Sourcing Strategy: Direct contact with Panduit Corp or authorized distributors is required to identify current production equivalents to the FMPOMRSXMAQ. Alternative manufacturers producing MPO Duplex Plug Connectors with identical specifications are acceptable when all parameters align and compliance certifications are verified.

Frequently Asked Questions (FAQ)

Q: What makes a fiber optic connector a valid substitute for the FMPOMRSXMAQ?

A: A valid substitute must be an MPO Duplex Plug Connector designed for 50µm multimode fiber (OM3/OM4 modes) with 125µm cladding diameter, free hanging in-line mounting, push-pull fastening, aqua housing, dust cap, and strain relief. Performance specifications must match or exceed -0.35dB attenuation and -20dB reflection. ROHS3 compliance and REACH unaffected status are mandatory.

Q: Can I use a different housing color if all other specifications match?

A: Housing color is a specified parameter for the FMPOMRSXMAQ. Aqua housing is required for direct substitution to maintain visual identification and compatibility with existing system documentation and installation practices.

Q: Are single-mode MPO connectors compatible with this multimode connector?

A: No. The FMPOMRSXMAQ is specified for multimode OM3/OM4 fiber with 50µm core diameter. Single-mode connectors operate with 9µm core diameter fiber and are not compatible. Fiber mode and core diameter must match exactly.

Q: What is the significance of the push-pull fastening type?

A: Push-pull fastening is a mechanical interface specification that determines how the connector mates and disconnects from receptacles. Substitutes must use identical push-pull mechanisms to ensure proper mating cycles and prevent mechanical incompatibility.

Q: Does the dust cap and strain relief affect substitution eligibility?

A: Yes. Dust cap and strain relief are specified features of the FMPOMRSXMAQ. Substitute connectors must include both features to provide equivalent environmental protection and mechanical durability.

Q: Why is the attenuation specification of -0.35dB important for substitution?

A: Attenuation specification defines signal loss through the connector. Substitutes must achieve -0.35dB or better to maintain system performance and link budget calculations in multimode fiber optic networks.

Q: Can I substitute with an MPO connector from a different manufacturer?

A: Yes, provided the alternative manufacturer's MPO Duplex Plug Connector meets all specified parameters: 50µm multimode fiber, OM3/OM4 modes, 125µm cladding, push-pull fastening, aqua housing, dust cap, strain relief, and equivalent performance specifications. ROHS3 and REACH compliance must be verified.

Q: What does "obsolete" product status mean for my system?

A: Obsolete status indicates the FMPOMRSXMAQ is no longer in active production. Existing inventory may be available through distributors, but long-term availability is not guaranteed. Identifying and qualifying substitute parts ensures continuity for future maintenance and system expansion.