FMMV2103TA Varactor Diode Equivalent & Substitute Parts

Part Overview

The FMMV2103TA is a single varactor diode manufactured by Diodes Incorporated, designed for voltage-controlled capacitance applications in RF and tuning circuits. Packaged in SOT-23-3 surface mount configuration, this component operates across a -55°C to 150°C temperature range with a peak reverse voltage rating of 30 V.

The FMMV2103TA is classified as obsolete. Locating equivalent substitute parts is necessary to maintain design continuity and ensure component availability for production and repair applications. Substitute parts must maintain electrical compatibility within the allowed parameter tolerances for varactor diode applications.

Key Parameters

Parameter	Value	Condition/Notes
Diode Type	Single	Varactor configuration
Package / Case	TO-236-3, SC-59, SOT-23-3	Surface mount
Voltage - Peak Reverse (Max)	30 V	Maximum operating voltage
Capacitance @ Vr, F	11 pF @ 4V, 1 MHz	Reference capacitance
Capacitance Ratio	3.3	C2/C30
Operating Temperature	-55°C ~ 150°C (TJ)	Junction temperature range
Mounting Type	Surface Mount	Automated assembly compatible
Q @ Vr, F	400 @ 4V, 50 MHz	Quality factor

Substitute Part Grouping Explanation

Substitution eligibility for the FMMV2103TA is determined by the following criteria:

Mandatory Compatibility Parameters:

Package / Case: Must be TO-236-3, SC-59, or SOT-23-3 (surface mount)
Diode Type: Must be Single varactor configuration
Mounting Type: Must be Surface Mount

Electrical Compatibility Parameters:

Voltage - Peak Reverse (Max): Substitute must equal or exceed 30 V rating
Capacitance characteristics: Substitute must operate within acceptable tuning range for the application
Operating Temperature: Substitute must support minimum -55°C to 125°C range (note: FMMV2103TA extends to 150°C)

The three substitute parts listed (SMV1213-001LF, SMV1215-001LF, SMV1255-001LF) share the identical SOT-23-3 package and single varactor diode configuration. However, each substitute exhibits different electrical characteristics, particularly in peak reverse voltage ratings and capacitance values. Selection depends on specific circuit requirements and voltage constraints.

Parameter Comparison

Parameter	FMMV2103TA (Main)	SMV1213-001LF	SMV1215-001LF	SMV1255-001LF
Manufacturer	Diodes Incorporated	Skyworks Solutions Inc.	Skyworks Solutions Inc.	Skyworks Solutions Inc.
Product Status	Obsolete	Active	Active	Active
Package / Case	SOT-23-3	SOT-23-3	SOT-23-3	SOT-23-3
Diode Type	Single	Single	Single	Single
Voltage - Peak Reverse (Max)	30 V	12 V	12 V	15 V
Capacitance @ Vr, F	11 pF @ 4V, 1 MHz	5.5 pF @ 4V, 50 MHz	2.9 pF @ 4V, 500 MHz	Not specified
Capacitance Ratio	3.3 (C2/C30)	5 (C1/C4)	5 (C1/C4)	12.3 (C0.3/C4.7)
Q @ Vr, F	400 @ 4V, 50 MHz	Not specified	Not specified	350 @ 3V, 50 MHz
Operating Temperature	-55°C ~ 150°C (TJ)	-55°C ~ 125°C (TJ)	-55°C ~ 125°C (TJ)	-55°C ~ 125°C (TJ)
RoHS Status	RoHS non-compliant	ROHS3 Compliant	ROHS3 Compliant	Not specified
Mounting Type	Surface Mount	Surface Mount	Surface Mount	Surface Mount
Inventory Status	734 Pcs New Original In Stock	17436 Pcs New Original In Stock	20271 Pcs New Original In Stock	2049 Pcs New Original In Stock

Engineering Selection Recommendations

Voltage Rating Consideration: All three substitute parts operate at lower peak reverse voltage ratings (12 V, 12 V, and 15 V respectively) compared to the FMMV2103TA (30 V). Substitution is only viable in applications where the circuit operates below the substitute part's maximum voltage specification. Circuits designed for the full 30 V capability of the FMMV2103TA cannot use these substitutes without circuit redesign.

Product Status and Availability: The FMMV2103TA is obsolete. All three substitute parts (SMV1213-001LF, SMV1215-001LF, SMV1255-001LF) are active products with significantly higher inventory availability, making them suitable for new designs and ongoing production requirements.

Compliance Status: SMV1213-001LF and SMV1215-001LF are ROHS3 compliant, meeting current environmental and regulatory requirements. The FMMV2103TA is RoHS non-compliant. For applications requiring RoHS compliance, these Skyworks Solutions substitutes are preferred.

Temperature Range: The FMMV2103TA supports operation to 150°C junction temperature. All substitute parts are rated to 125°C maximum. Applications requiring operation above 125°C cannot use these substitutes.

Capacitance and Q Factor Characteristics: Each substitute exhibits different capacitance values and frequency characteristics. SMV1215-001LF operates at higher frequencies (500 MHz) with lower capacitance (2.9 pF). SMV1213-001LF provides moderate frequency operation (50 MHz) with higher capacitance (5.5 pF). SMV1255-001LF offers the highest capacitance ratio (12.3) with specified Q factor of 350 @ 3V, 50 MHz. Selection depends on the specific tuning range and frequency band required by the application.

Frequently Asked Questions (FAQ)

Q: Can SMV1213-001LF, SMV1215-001LF, or SMV1255-001LF be used as direct replacements for FMMV2103TA?

A: Direct replacement is not possible without circuit evaluation. All three substitutes have lower peak reverse voltage ratings (12 V, 12 V, and 15 V) compared to the FMMV2103TA (30 V). Substitution is only valid if the application circuit operates below the substitute part's voltage specification. Additionally, the capacitance characteristics differ significantly, requiring verification that the substitute provides acceptable tuning performance for the intended frequency band.

Q: What is the primary reason for substitution?

A: The FMMV2103TA is classified as obsolete. The three Skyworks Solutions substitutes are active products with established supply chains and higher inventory availability. Substitution is necessary to ensure component availability for production and repair applications.

Q: Are the substitute parts RoHS compliant?

A: SMV1213-001LF and SMV1215-001LF are ROHS3 compliant. The FMMV2103TA is RoHS non-compliant. For applications requiring RoHS compliance, these Skyworks Solutions parts meet current environmental regulations.

Q: Do all substitute parts use the same package?

A: Yes. All substitute parts (SMV1213-001LF, SMV1215-001LF, SMV1255-001LF) use the SOT-23-3 package, identical to the FMMV2103TA. This ensures mechanical and pin compatibility for surface mount assembly.

Q: Which substitute part should be selected for high-frequency applications?

A: SMV1215-001LF is specified for operation at 500 MHz with a capacitance of 2.9 pF @ 4V. This part is suitable for higher frequency tuning applications. SMV1213-001LF operates at 50 MHz with higher capacitance (5.5 pF), making it suitable for lower frequency applications.

Q: What is the capacitance ratio, and why does it differ among substitutes?

A: The capacitance ratio describes the relationship between capacitance values at different reverse voltages. FMMV2103TA has a ratio of 3.3 (C2/C30). SMV1213-001LF and SMV1215-001LF both have a ratio of 5 (C1/C4). SMV1255-001LF has a ratio of 12.3 (C0.3/C4.7). Different ratios indicate different tuning characteristics and voltage sensitivity. Selection depends on the required tuning range for the specific application.

Q: Can FMMV2103TA be used in applications requiring operation above 125°C?

A: Yes. The FMMV2103TA is rated to 150°C junction temperature, while all three substitute parts are limited to 125°C. For high-temperature applications, the FMMV2103TA is the only option among these parts. However, given its obsolete status, alternative high-temperature varactor diodes from other manufacturers may be necessary for new designs.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message