FMMTL720TA Equivalent & Substitute Parts

Part Overview

The FMMTL720TA is a PNP bipolar junction transistor manufactured by Diodes Incorporated, rated for 40 V collector-emitter breakdown voltage and 1 A maximum collector current in a surface mount SOT-23-3 package. This device is classified as obsolete, making equivalent and substitute parts necessary for ongoing design support and production continuity. The part operates across an industrial temperature range of -55°C to 150°C and is RoHS3 compliant with unlimited moisture sensitivity rating.

Key Parameters

Parameter	Value	Unit
Transistor Type	PNP	—
Maximum Collector Current (Ic)	1	A
Collector-Emitter Breakdown Voltage (Max)	40	V
Maximum Power Dissipation	500	mW
Vce Saturation @ Ib, Ic	300 mV @ 100 mA, 1 A	—
DC Current Gain (hFE Min) @ Ic, Vce	200 @ 500 mA, 5 V	—
Operating Temperature Range	-55 to 150	°C
Package Type	SOT-23-3 (TO-236-3, SC-59)	—
Mounting Type	Surface Mount	—
RoHS Status	ROHS3 Compliant	—

Substitute Part Grouping Explanation

Substitution of the FMMTL720TA is determined by the following critical parameters:

Primary Substitution Criteria:

Transistor type must be PNP
Package must be SOT-23-3 (TO-236-3, SC-59) for mechanical and electrical compatibility
Collector-emitter breakdown voltage must equal or exceed 40 V
Maximum collector current must equal or exceed 1 A
Operating temperature range must support -55°C to 150°C
Surface mount configuration required

Secondary Compatibility Factors:

RoHS3 compliance and MSL rating (1 - Unlimited) for manufacturing compatibility
Vce saturation characteristics for switching performance
DC current gain (hFE) for biasing circuit design

Substitute parts are grouped into two categories based on electrical performance:

Category A - Direct Electrical Equivalents (40 V, 1 A Rating): Parts that maintain the exact voltage and current specifications of the FMMTL720TA, ensuring drop-in compatibility with minimal circuit redesign.

Category B - Enhanced Performance Substitutes (Higher Voltage or Current Rating): Parts that exceed the FMMTL720TA specifications in voltage or current capacity, providing design margin and extended operational headroom while maintaining SOT-23-3 packaging and surface mount configuration.

Parameter Comparison

Part Number	Manufacturer	Ic (Max) A	Vce Breakdown (Max) V	Power (Max) mW	Vce Sat @ Ib, Ic	hFE (Min) @ Ic, Vce	Temp Range °C	Package	Status
FMMTL720TA	Diodes Incorporated	1	40	500	300 mV @ 100 mA, 1 A	200 @ 500 mA, 5 V	-55 to 150	SOT-23-3	Obsolete
MMBT4403LT3G	onsemi	0.6	40	300	750 mV @ 50 mA, 500 mA	100 @ 150 mA, 2 V	-55 to 150	SOT-23-3	Active
MMBT4403LT1G	onsemi	0.6	40	300	750 mV @ 50 mA, 500 mA	100 @ 150 mA, 2 V	-55 to 150	SOT-23-3	Active
MMBT2907ALT3G	onsemi	0.6	60	300	1.6 V @ 50 mA, 500 mA	100 @ 150 mA, 10 V	-55 to 150	SOT-23-3	Active
MMBT2907ALT1G	onsemi	0.6	60	300	1.6 V @ 50 mA, 500 mA	100 @ 150 mA, 10 V	-55 to 150	SOT-23-3	Active
2SA1037AKT146R	Rohm Semiconductor	0.15	50	200	500 mV @ 5 mA, 50 mA	180 @ 1 mA, 6 V	-55 to 150	SMT3	Active
2SA1037AKT146Q	Rohm Semiconductor	0.15	50	200	500 mV @ 5 mA, 50 mA	120 @ 1 mA, 6 V	-55 to 150	SMT3	Active
NSS30100LT1G	onsemi	1	30	310	650 mV @ 200 mA, 2 A	100 @ 500 mA, 2 V	-55 to 150	SOT-23-3	Active
PBSS5140T,215	Nexperia USA Inc.	1	40	450	500 mV @ 100 mA, 1 A	300 @ 100 mA, 5 V	-55 to 150	SOT-23-3	Active
PMMT591A,215	Nexperia USA Inc.	1	40	250	500 mV @ 100 mA, 1 A	300 @ 100 mA, 5 V	-55 to 150	SOT-23-3	Active

Engineering Selection Recommendations

Direct Replacement (40 V, 1 A Rating):

The PBSS5140T,215 (Nexperia USA Inc.) and PMMT591A,215 (Nexperia USA Inc.) are the primary direct replacements for the FMMTL720TA. Both parts maintain identical voltage and current specifications (40 V, 1 A), operate across the full -55°C to 150°C temperature range, and are packaged in SOT-23-3. Both are RoHS3 compliant with MSL 1 rating. The PBSS5140T,215 is automotive-grade with AEC-Q100 qualification, providing additional reliability assurance for mission-critical applications. The PMMT591A,215 offers equivalent electrical performance with active product status and established supply availability.

Voltage-Rated Substitutes (Higher Voltage Margin):

The MMBT2907ALT3G and MMBT2907ALT1G (onsemi) provide 60 V collector-emitter breakdown voltage, exceeding the FMMTL720TA specification by 50%. These parts are suitable for applications requiring additional voltage margin. However, maximum collector current is limited to 600 mA, requiring circuit verification for applications demanding the full 1 A rating. Both parts maintain the -55°C to 150°C operating range and SOT-23-3 packaging.

Current-Rated Substitutes (Matching Current, Lower Voltage):

The NSS30100LT1G (onsemi) maintains the 1 A collector current rating but operates at a reduced 30 V collector-emitter breakdown voltage. This part is suitable only for applications where the 40 V specification can be relaxed. The part is active, RoHS3 compliant, and operates across the full temperature range in SOT-23-3 packaging.

Limited Substitutes (Reduced Current Rating):

The 2SA1037AKT146R and 2SA1037AKT146Q (Rohm Semiconductor) are low-current alternatives rated for 150 mA maximum collector current. These parts are not suitable for applications requiring the full 1 A specification and should be used only in signal-level switching or amplification circuits. Both are active products with 50 V voltage rating and operate across the full temperature range.

Reduced Current Substitutes (600 mA Rating):

The MMBT4403LT3G and MMBT4403LT1G (onsemi) match the 40 V voltage specification but are limited to 600 mA collector current. These parts are suitable for applications where current demand does not exceed 600 mA. Both are active, RoHS3 compliant, and maintain the -55°C to 150°C operating range in SOT-23-3 packaging.

All recommended substitutes are active products with established supply chains, RoHS3 compliance, and MSL 1 moisture sensitivity rating, ensuring manufacturing compatibility with existing assembly processes.

Frequently Asked Questions (FAQ)

Q: Can the MMBT4403LT3G directly replace the FMMTL720TA in all applications?

A: The MMBT4403LT3G is mechanically and electrically compatible in SOT-23-3 packaging and matches the 40 V voltage specification. However, its maximum collector current is 600 mA compared to the FMMTL720TA's 1 A rating. Direct replacement is valid only for applications where peak collector current does not exceed 600 mA. Circuit analysis is required to confirm current requirements.

Q: What is the difference between PBSS5140T,215 and PMMT591A,215?

A: Both parts are direct electrical equivalents of the FMMTL720TA with identical 40 V, 1 A specifications and SOT-23-3 packaging. The PBSS5140T,215 includes automotive-grade qualification (AEC-Q100) and is suitable for automotive and high-reliability applications. The PMMT591A,215 is a standard industrial-grade part. Maximum power dissipation differs: PBSS5140T,215 is rated 450 mW versus PMMT591A,215 at 250 mW.

Q: Why are the 2SA1037AKT146R and 2SA1037AKT146Q listed as substitutes if they have only 150 mA current rating?

A: These parts are listed as substitutes for applications where the FMMTL720TA is used in signal-level switching or low-current amplification circuits. They are not suitable for applications requiring the full 1 A specification. The 50 V voltage rating provides additional margin over the FMMTL720TA's 40 V specification.

Q: Can I use MMBT2907ALT3G in place of FMMTL720TA for higher voltage applications?

A: The MMBT2907ALT3G is suitable for applications requiring higher voltage margin (60 V versus 40 V). However, maximum collector current is limited to 600 mA. Use this part only if both the reduced current rating and higher voltage specification are compatible with circuit requirements.

Q: Are all substitute parts RoHS3 compliant?

A: Yes. All substitute parts listed are RoHS3 compliant with MSL 1 (unlimited) moisture sensitivity rating, ensuring compatibility with standard surface mount assembly processes and environmental regulations.

Q: What is the operating temperature range for all substitute parts?

A: All substitute parts operate across the full -55°C to 150°C temperature range, matching the FMMTL720TA specification. This ensures compatibility with industrial and extended-temperature applications.

Q: Which substitute part has the highest current gain (hFE)?

A: The PBSS5140T,215 and PMMT591A,215 both specify a minimum hFE of 300 @ 100 mA, 5 V, compared to the FMMTL720TA's 200 @ 500 mA, 5 V. Higher current gain reduces base drive requirements in switching applications.

Q: Is NSS30100LT1G a suitable replacement if voltage specification can be reduced?

A: The NSS30100LT1G maintains the 1 A collector current rating but operates at 30 V maximum collector-emitter breakdown voltage, 10 V below the FMMTL720TA specification. This part is suitable only for applications where the reduced voltage specification does not compromise circuit performance or safety margins.

Q: What packaging differences exist between substitute parts?

A: All substitute parts are packaged in SOT-23-3 (TO-236-3, SC-59) or equivalent SMT3 surface mount packages. Mechanical compatibility is maintained across all listed substitutes. Supplier device package designations may vary (SOT-23-3 versus SMT3) but represent identical physical packages.

Q: Can I mix different substitute parts in the same production run?

A: Yes, provided circuit requirements are met by each part's electrical specifications. However, design verification is required for parts with reduced current ratings (600 mA or 150 mA) or voltage specifications (30 V). Mixing parts with different hFE characteristics may require base drive circuit adjustment.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message