Equivalent & Substitute Parts for FMD-4206S

Part Overview

The FMD-4206S, manufactured by Sanken Electric USA Inc., is a diode array designed for use in rectifier applications. It features a maximum DC reverse voltage of 600 V and a continuous average rectified current of 20 A per diode in a TO-3P-3 Full Pack through-hole package. The part is currently active and RoHS compliant, suitable for applications requiring fast recovery characteristics.

Identifying alternative models is essential for supply chain continuity, risk mitigation due to inventory or sourcing constraints, and ensuring compatibility within given electrical, mechanical, and compliance parameters. Substitutes must strictly match critical specifications provided for this component category.

Substiute Parts

FMD-4206S

Sanken Electric USA Inc.In Stock: 2116FMD-4206S Datasheet

Current PartRFQ

BYV410X-600,127

WeEn SemiconductorsIn Stock: 7198BYV410X-600,127 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is determined based on strict matching of the following critical parameters: device category, maximum DC reverse voltage, average rectified current per diode, forward voltage at specified current, recovery speed, reverse recovery time, reverse leakage current, operating temperature range, mounting type, package specification, RoHS compliance, MSL rating, and product status. Only parts meeting these electrical, thermal, mechanical, and compliance parameters are listed as suitable substitutes.

Key parameters for this grouping:

• Category: Diodes, Rectifiers
• Voltage - DC Reverse (Vr) (Max)
• Current - Average Rectified (Io) (per Diode)
• Voltage - Forward (Vf) (Max) @ If
• Speed and Reverse Recovery Time (trr)
• Current - Reverse Leakage @ Vr
• Operating Temperature - Junction
• Mounting Type
• Package / Case
• RoHS Status
• Moisture Sensitivity Level
• Product Status

Parameter Comparison

Engineering Selection Recommendations

Selection between FMD-4206S and BYV410X-600,127 can be based on active product status, RoHS compliance, and moisture sensitivity level (MSL 1, Unlimited). Both devices are currently active, meet RoHS compliance requirements, and have equivalent MSL ratings. Only parameters provided above should be considered for selection.

Frequently Asked Questions (FAQ)

Q1: Which key parameters are critical for substituting diode rectifiers in this category?
A1: The critical parameters are voltage - DC reverse (Vr) maximum, current - average rectified (Io) per diode, voltage - forward (Vf) at specified current, recovery speed, reverse recovery time (trr), reverse leakage current at Vr, operating temperature range, mounting type, package/case, RoHS status, MSL rating, and product status.

Q2: Can the BYV410X-600,127 fully substitute the FMD-4206S in all applications?
A2: Substitution is determined strictly by the key electrical, mechanical, and compliance parameters listed in the comparison table. Refer directly to the parameters to verify suitability.

Q3: What package compatibility considerations exist between FMD-4206S and BYV410X-600,127?
A3: FMD-4206S uses the TO-3P-3 Full Pack (TO-3PF) package, while BYV410X-600,127 is supplied in a TO-220-3 Full Pack, Isolated Tab (TO-220F). Mechanical compatibility should be evaluated based on these package specifications.

Q4: How does RoHS compliance affect selection?
A4: Both parts are RoHS compliant per the provided information and are suitable for use in lead-free and environmentally regulated assemblies.

Q5: What is the product status for both FMD-4206S and BYV410X-600,127?
A5: Both FMD-4206S and BYV410X-600,127 are listed as active.