FL-R-PC-10 Equivalent & Substitute Parts

Part Overview

The FL-R-PC-10 is a coaxial RF connector receptacle manufactured by Hirose Electric Co Ltd, designed for PCB-mounted applications with 50 Ohm impedance. This female socket connector features solder contact termination and press-fit shield mounting, supporting frequencies up to 1 GHz. The part is currently in Last Time Buy status, making identification of equivalent alternatives essential for ongoing design support and procurement planning.

Key Parameters

Parameter	FL-R-PC-10 Specification
Manufacturer Part Number	FL-R-PC-10
Manufacturer	Hirose Electric Co Ltd
Category	Coaxial Connectors (RF)
Series	FL
Connector Type	Receptacle, Female Socket
Impedance	50 Ohms
Frequency - Max	1 GHz
Contact Termination	Solder
Shield Termination	Press-Fit
Mounting Type	Through Hole
Fastening Type	Snap-On
Center Contact Material	Phosphor Bronze
Body Material	Phosphor Bronze
Center Contact Plating	Gold
Dielectric Material	Polybutylene Terephthalate (PBT)
Mating Cycles	50
RoHS Status	RoHS Compliant
Product Status	Last Time Buy

Substitute Part Grouping Explanation

Substitute parts for the FL-R-PC-10 are identified based on strict electrical and mechanical parameter matching within the FL series coaxial connector family. All substitute candidates maintain identical specifications across the following critical parameters:

Connector Series: FL
Connector Type: Receptacle, Female Socket
Impedance: 50 Ohms
Frequency Maximum: 1 GHz
Contact Termination: Solder
Shield Termination: Press-Fit
Mounting Type: Through Hole
Fastening Type: Snap-On
Center Contact Material: Phosphor Bronze
Body Material: Phosphor Bronze
Center Contact Plating: Gold
Dielectric Material: Polybutylene Terephthalate (PBT)
Mating Cycles: 50
RoHS Compliance: Yes

Variations in Body Finish (Silver vs. Nickel) and Operating Temperature specification do not affect functional interchangeability for RF signal transmission and mechanical mounting compatibility.

Parameter Comparison

Parameter	FL-R-PC-10	FL-R-PC(1)	FL-R-PC(2)	FL-R-PC(3)
Manufacturer	Hirose Electric Co Ltd	Hirose Electric Co Ltd	Hirose Electric Co Ltd	Hirose Electric Co Ltd
Series	FL	FL	FL	FL
Connector Type	Receptacle, Female Socket	Receptacle, Female Socket	Receptacle, Female Socket	Receptacle, Female Socket
Impedance	50 Ohms	50 Ohms	50 Ohms	50 Ohms
Frequency - Max	1 GHz	1 GHz	1 GHz	1 GHz
Contact Termination	Solder	Solder	Solder	Solder
Shield Termination	Press-Fit	Press-Fit	Press-Fit	Press-Fit
Mounting Type	Through Hole	Through Hole	Through Hole	Through Hole
Fastening Type	Snap-On	Snap-On	Snap-On	Snap-On
Center Contact Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Body Material	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze	Phosphor Bronze
Center Contact Plating	Gold	Gold	Gold	Gold
Dielectric Material	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)	Polybutylene Terephthalate (PBT)
Mating Cycles	50	50	50	50
Body Finish	Silver	Nickel	Silver	Nickel
Operating Temperature	Not Specified	-35°C ~ 85°C	Not Specified	-35°C ~ 85°C
Product Status	Last Time Buy	Active	Active	Active
RoHS Status	RoHS Compliant	RoHS Compliant	RoHS Compliant	RoHS Compliant

Engineering Selection Recommendations

All three substitute parts—FL-R-PC(1), FL-R-PC(2), and FL-R-PC(3)—are functionally equivalent to FL-R-PC-10 for RF coaxial connector applications. The primary distinction is product status: FL-R-PC(1) and FL-R-PC(3) maintain Active status with specified operating temperature ranges (-35°C ~ 85°C), while FL-R-PC(2) remains Active with unspecified operating temperature.

For new designs and long-term procurement, FL-R-PC(1) and FL-R-PC(3) are preferred due to their Active product status and defined thermal operating range. Both parts are RoHS Compliant and maintain full electrical and mechanical compatibility with FL-R-PC-10.

FL-R-PC(2) provides an alternative with identical electrical specifications and Active status, suitable for applications where operating temperature specification is not a design constraint.

Frequently Asked Questions (FAQ)

Q: Can FL-R-PC(1), FL-R-PC(2), and FL-R-PC(3) be used interchangeably with FL-R-PC-10?

A: Yes. All substitute parts maintain identical electrical impedance (50 Ohms), frequency rating (1 GHz), contact termination (Solder), shield termination (Press-Fit), and mechanical mounting specifications (Through Hole, Snap-On fastening). They are functionally equivalent for PCB-mounted RF coaxial connector applications.

Q: What is the difference between Silver and Nickel body finishes?

A: Body finish variation (Silver vs. Nickel) does not affect electrical performance or mechanical interchangeability. Both finishes provide corrosion resistance and maintain the same RF transmission characteristics. Selection may depend on environmental exposure or aesthetic requirements.

Q: Why do some parts specify operating temperature while others do not?

A: Operating temperature specification indicates the validated thermal range for the component. FL-R-PC(1) and FL-R-PC(3) specify -35°C ~ 85°C, while FL-R-PC-10 and FL-R-PC(2) do not include this specification in the provided data. This does not indicate functional limitation; it reflects available documentation.

Q: Is FL-R-PC-10 still available for procurement?

A: FL-R-PC-10 is designated Last Time Buy status with 758 units in stock. For ongoing procurement, FL-R-PC(1), FL-R-PC(2), or FL-R-PC(3) are recommended as they maintain Active product status.

Q: Are all substitute parts RoHS Compliant?

A: Yes. FL-R-PC-10, FL-R-PC(1), FL-R-PC(2), and FL-R-PC(3) are all RoHS Compliant, meeting environmental and regulatory requirements for electronic component manufacturing.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message