FL2000132Z Equivalent & Substitute Parts

Part Overview

The FL2000132Z is a 20 MHz fundamental mode crystal oscillator manufactured by Diodes Incorporated, packaged in a 4-SMD, No Lead surface mount configuration. This component is designed for applications requiring precise frequency generation with ±30ppm stability and 12pF load capacitance. The part is Active status and ROHS3 compliant, making it suitable for modern electronic designs. Substitute parts may be required due to inventory availability, packaging format preferences, or specific application constraints such as ESR (Equivalent Series Resistance) tolerance or physical dimensions.

Substiute Parts

FL2000132Z

Diodes IncorporatedIn Stock: 741FL2000132Z Datasheet

Current PartRFQ

8Y-20.000MAAE-T

TXC CORPORATIONIn Stock: 10448Y-20.000MAAE-T Datasheet

MFR RecommendedRFQ

8Z-20.000MAAE-T

TXC CORPORATIONIn Stock: 11908Z-20.000MAAE-T Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FL2000132Z is determined by the following critical parameters:

• Frequency Match: 20 MHz (exact match required)
• Frequency Stability: ±30ppm (exact match required)
• Load Capacitance: 12pF (exact match required)
• Operating Mode: Fundamental (exact match required)
• Operating Temperature Range: -20°C ~ 70°C (exact match required)
• Package / Case: 4-SMD, No Lead (exact match required)
• Moisture Sensitivity Level: 1 (Unlimited) (exact match required)

The substitute parts 8Y-20.000MAAE-T and 8Z-20.000MAAE-T meet all critical electrical and mechanical parameters. Variations in ESR (60 Ohms vs. 100 Ohms) and physical dimensions remain within acceptable tolerances for this crystal category. Packaging format differences (Tape & Reel vs. Cut Tape) do not affect electrical performance but may influence procurement and assembly workflows.

Parameter Comparison

Engineering Selection Recommendations

Both TXC CORPORATION substitute parts (8Y-20.000MAAE-T and 8Z-20.000MAAE-T) are functionally equivalent to the FL2000132Z for applications requiring 20 MHz fundamental mode crystals with ±30ppm stability and 12pF load capacitance. All three parts maintain Active product status and comply with ROHS3 and REACH requirements.

The primary distinction between substitute options is packaging format: 8Y-20.000MAAE-T is supplied in Tape & Reel format, while 8Z-20.000MAAE-T is supplied in Cut Tape format. Physical dimensions vary slightly across all three parts, with the TXC components featuring reduced height (0.022" vs. 0.030"), which may provide advantages in space-constrained applications. ESR differences (60 Ohms vs. 100 Ohms) are within acceptable ranges for this crystal category and do not preclude substitution.

Frequently Asked Questions (FAQ)

Q: Can 8Y-20.000MAAE-T and 8Z-20.000MAAE-T be used interchangeably with FL2000132Z?

A: Yes. Both TXC parts meet all critical electrical parameters: 20 MHz frequency, ±30ppm stability, 12pF load capacitance, and fundamental operating mode. The primary difference is packaging format (Tape & Reel vs. Cut Tape), which does not affect electrical performance.

Q: What is the significance of the ESR difference (60 Ohms vs. 100 Ohms)?

A: ESR variation between 60 Ohms and 100 Ohms remains within acceptable tolerance for 20 MHz crystal applications. Both values support reliable oscillator circuit operation at the specified frequency and load capacitance.

Q: Are there physical dimension constraints I should consider?

A: The TXC substitute parts (8Y and 8Z) are smaller than the FL2000132Z, with reduced height (0.022" vs. 0.030"). Verify PCB layout and component placement clearances before substitution. Smaller dimensions may provide benefits in compact designs.

Q: Which packaging format should I select?

A: 8Y-20.000MAAE-T (Tape & Reel) is suitable for high-volume automated assembly. 8Z-20.000MAAE-T (Cut Tape) is appropriate for lower-volume or manual assembly processes. Select based on your production workflow requirements.

Q: Do all parts meet current compliance standards?

A: Yes. FL2000132Z, 8Y-20.000MAAE-T, and 8Z-20.000MAAE-T are all ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and use.