FKP1T031007E00KSSD Equivalent & Substitute Parts

Part Overview

The FKP1T031007E00KSSD is a 0.1 µF film capacitor manufactured by WIMA, part of the FKP 1 series. This component is a metallized polypropylene (PP) radial capacitor rated for 1600V DC (1.6kV) and 650V AC operation. The device is designed for through-hole mounting and is qualified to AEC-Q200 automotive standards. The part maintains Active product status with 755 units currently in stock. Film capacitors of this specification are essential in automotive, high-frequency switching, and high pulse/DV/DT applications where reliable energy storage and filtering at elevated voltage levels are required.

Substiute Parts

FKP1T031007E00KSSD

WIMAIn Stock: 846FKP1T031007E00KSSD Datasheet

Current PartRFQ

FKP1T031007E00KSSD

WIMAIn Stock: 846FKP1T031007E00KSSD Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FKP1T031007E00KSSD is determined by strict equivalence across the following critical parameters:

Electrical Parameters:

• Capacitance value: 0.1 µF (exact match required)
• Voltage rating - DC: 1600V minimum (equal or higher acceptable)
• Voltage rating - AC: 650V minimum (equal or higher acceptable)
• Tolerance: ±10% (equal or tighter acceptable)
• Dielectric material: Polypropylene (PP), Metallized (exact match required)

Mechanical Parameters:

• Mounting type: Through Hole (exact match required)
• Package / Case: Radial (exact match required)
• Dimensions: 41.50mm L x 17.00mm W (exact match required for PCB fit)
• Height - Seated: 29.00mm maximum (exact match required for clearance)
• Lead spacing: 37.50mm (exact match required for PCB hole pattern)
• Termination: PC Pins (exact match required)

Environmental & Compliance Parameters:

• Operating temperature range: -55°C ~ 105°C minimum (equal or wider acceptable)
• Product status: Active (required for current availability)
• AEC-Q200 automotive qualification (required for automotive applications)

Based on the provided input data, the FKP1T031007E00KSSD is identified as its own parametric equivalent with no additional substitute parts listed in the substitute part list.

Parameter Comparison

Engineering Selection Recommendations

The FKP1T031007E00KSSD is an Active product with full AEC-Q200 automotive qualification, ensuring compliance with automotive reliability and quality standards. Selection of this component is appropriate for applications requiring:

• High-voltage DC operation at 1600V
• Polypropylene dielectric stability across the -55°C to 105°C operating range
• Automotive-grade reliability and traceability
• Through-hole mounting in legacy or high-reliability PCB designs
• High-frequency switching and high pulse/DV/DT transient environments

The part's MSL rating of 1 (Unlimited) indicates no moisture sensitivity constraints during storage or handling. Current inventory status of 755 units supports immediate procurement for production requirements.

Frequently Asked Questions (FAQ)

Q: What makes a part a valid substitute for the FKP1T031007E00KSSD?

A: A substitute must match all critical electrical parameters (0.1 µF capacitance, 1600V DC minimum, 650V AC minimum, ±10% tolerance, polypropylene metallized dielectric), all mechanical parameters (through-hole radial package, 41.50mm x 17.00mm dimensions, 29.00mm height, 37.50mm lead spacing, PC pin termination), and maintain Active product status with AEC-Q200 qualification.

Q: Can I use a capacitor with higher voltage rating as a substitute?

A: Yes, a capacitor with equal or higher voltage ratings (DC and AC) is acceptable as a substitute, provided all other parameters remain identical. Higher voltage ratings do not compromise circuit function in lower-voltage applications.

Q: Are there dimensional constraints I must observe when substituting this capacitor?

A: Yes. The physical dimensions (41.50mm length, 17.00mm width, 29.00mm seated height, and 37.50mm lead spacing) are fixed requirements. Any deviation will result in PCB fit incompatibility and mounting failure.

Q: What is the significance of the AEC-Q200 rating?

A: AEC-Q200 certification indicates the component meets automotive industry reliability standards for passive components. This rating is mandatory for automotive applications and ensures traceability, quality control, and long-term performance in vehicle environments.

Q: Does the ±10% tolerance affect substitution decisions?

A: Tolerance specifications must be equal or tighter (e.g., ±5% is acceptable; ±15% is not). Looser tolerances introduce unacceptable capacitance variation in precision circuits.

Q: What does MSL 1 (Unlimited) mean for component handling?

A: MSL 1 indicates the component has no moisture sensitivity limitations. Standard dry storage conditions are sufficient; no special moisture-barrier packaging or baking procedures are required before soldering.