FKDMZG Equivalent & Substitute Parts

Part Overview

The FKDMZG is a dual-port SMB Fakra Code Z coaxial connector manufactured by Taoglas Limited, designed for RF applications requiring 50-ohm impedance. This connector features a male pin configuration with crimp termination for both contact and shield, supporting cable groups RG-174 and RG-316. The part is classified as Active product status with ROHS3 compliance and unlimited moisture sensitivity rating. Substitute parts are identified when equivalent electrical and mechanical parameters align with application requirements, enabling component interchangeability within specified operational constraints.

Substiute Parts

FKDMZG

Taoglas LimitedIn Stock: 1149FKDMZG Datasheet

Current PartRFQ

FK0MZDK

Taoglas LimitedIn Stock: 1339FK0MZDK Datasheet

Parametric EquivalentRFQ

FK0MZG

Taoglas LimitedIn Stock: 826FK0MZG Datasheet

Parametric EquivalentRFQ

FKDMZDK

Taoglas LimitedIn Stock: 1023FKDMZDK Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FKDMZG is determined by strict alignment of the following critical parameters:

Electrical Parameters:

• Impedance: 50 Ohms (mandatory match)
• Frequency - Max: 6 GHz (mandatory match)
• Connector Style: SMB, Fakra (mandatory match)
• Features: Code Z (mandatory match)

Mechanical Parameters:

• Connector Type: Plug, Male Pin (mandatory match)
• Contact Termination: Crimp (mandatory match)
• Shield Termination: Crimp (mandatory match)
• Mounting Type: Free Hanging (In-Line) (mandatory match)
• Cable Group: RG-174, RG-316 (mandatory match)
• Fastening Type: Locking Ramp (mandatory match)

Environmental & Compliance Parameters:

• Operating Temperature: -40°C ~ 105°C (mandatory match)
• Mating Cycles: 25 (mandatory match)
• RoHS Status: ROHS3 Compliant (mandatory match)
• Moisture Sensitivity Level: 1 (Unlimited) (mandatory match)
• REACH Status: REACH Unaffected (mandatory match)

Port Configuration: The FKDMZG features 2 ports. Substitute parts with 1 port (FK0MZDK, FK0MZG) are functionally equivalent for single-port applications but represent a reduced-port variant. The dual-port substitute FKDMZDK maintains identical port configuration.

Parameter Comparison

Engineering Selection Recommendations

All substitute parts listed—FKDMZDK, FK0MZDK, and FK0MZG—maintain Active product status with identical ROHS3 compliance and REACH Unaffected certification. These parts are manufactured by Taoglas Limited and share all critical electrical and mechanical parameters with the FKDMZG.

FKDMZDK is the primary substitute for direct replacement applications, maintaining the dual-port (2-port) configuration of the FKDMZG. This part is functionally equivalent across all specified parameters.

FK0MZDK and FK0MZG are single-port (1-port) variants that maintain electrical and mechanical equivalence but differ in port count. These parts are suitable for applications requiring single-port connectivity where the dual-port configuration of FKDMZG is not required.

All parts are manufactured to ROHS3 standards with unlimited moisture sensitivity rating (MSL 1), ensuring compliance with environmental and regulatory requirements. Product availability is confirmed for all substitute options.

Frequently Asked Questions (FAQ)

Q: Can FKDMZDK be used as a direct replacement for FKDMZG?

A: Yes. FKDMZDK is a parametric equivalent with identical electrical impedance (50 Ohms), frequency rating (6 GHz), connector style (SMB, Fakra Code Z), termination methods (crimp contact and shield), mounting configuration (free hanging in-line), and operating temperature range (-40°C to 105°C). Both parts feature dual-port (2-port) configuration and are ROHS3 compliant.

Q: What is the difference between FKDMZG and FK0MZDK?

A: The primary difference is port configuration. FKDMZG features 2 ports, while FK0MZDK features 1 port. All other electrical and mechanical parameters are identical, including impedance, frequency rating, connector type, termination method, and operating specifications. FK0MZDK is suitable for single-port applications.

Q: Are FK0MZG and FK0MZDK interchangeable?

A: FK0MZG and FK0MZDK are both single-port variants with identical electrical and mechanical specifications. They are functionally equivalent for single-port applications.

Q: What cable types are compatible with these connectors?

A: All listed parts support RG-174 and RG-316 cable groups with crimp termination.

Q: Do all substitute parts meet the same compliance standards?

A: Yes. All parts—FKDMZG, FKDMZDK, FK0MZDK, and FK0MZG—are ROHS3 compliant, REACH Unaffected, and rated for unlimited moisture sensitivity (MSL 1).

Q: What is the maximum operating frequency for these connectors?

A: All parts are rated for a maximum frequency of 6 GHz.

Q: What is the operating temperature range?

A: All parts operate within the range of -40°C to 105°C.

Q: How many mating cycles are these connectors rated for?

A: All parts are rated for 25 mating cycles.