FI-SEB20P-HFE-E3000 Equivalent & Substitute Parts

Part Overview

The FI-SEB20P-HFE-E3000 is a rectangular connector header manufactured by JAE Electronics, designed for board edge applications with surface mount, right-angle mounting. This 20-position connector operates at 1A per contact and 200V, featuring a 1.25mm pitch and shrouded 4-wall design with solder termination. The part is Active status and RoHS Compliant, making it suitable for industrial and commercial applications requiring reliable board-to-cable connectivity.

Substitute parts are identified when equivalent electrical and mechanical parameters are maintained across the connector family, allowing for procurement flexibility and supply chain continuity.

Substiute Parts

FI-SEB20P-HFE-E3000

JAE ElectronicsIn Stock: 3719FI-SEB20P-HFE-E3000 Datasheet

Current PartRFQ

FI-SEB20P-HFE

JAE ElectronicsIn Stock: 1760FI-SEB20P-HFE Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FI-SEB20P-HFE-E3000 is determined by strict equivalence across the following critical parameters:

• Connector type (Receptacle) and contact type (Male Pin)
• Position count (20) and mating pitch (1.25mm)
• Mounting configuration (Board Edge, Cutout; Surface Mount, Right Angle)
• Electrical ratings (1A per contact, 200V)
• Operating temperature range (-40°C ~ 80°C)
• Contact finish (Gold mating surface)
• Insulation material (LCP, Glass Filled)
• Flammability compliance (UL94 V-0)

Packaging format (Tape & Reel versus Strip) does not affect electrical or mechanical compatibility and represents a procurement variation only.

Parameter Comparison

Engineering Selection Recommendations

Both FI-SEB20P-HFE-E3000 and FI-SEB20P-HFE are Active status products from JAE Electronics with full compliance to RoHS standards. The FI-SEB20P-HFE-E3000 carries RoHS Compliant certification, while FI-SEB20P-HFE carries ROHS3 Compliant certification, indicating enhanced compliance scope. Both parts maintain identical electrical and mechanical specifications, with the primary distinction being packaging format.

Selection between these parts should be based on procurement requirements and assembly processes. Tape & Reel packaging (FI-SEB20P-HFE-E3000) is optimized for automated pick-and-place assembly operations. Strip packaging (FI-SEB20P-HFE) is suitable for manual assembly or lower-volume applications. Current inventory levels are 3620 units for FI-SEB20P-HFE-E3000 and 1672 units for FI-SEB20P-HFE.

Frequently Asked Questions (FAQ)

Q: Are FI-SEB20P-HFE-E3000 and FI-SEB20P-HFE electrically interchangeable?

A: Yes. Both parts maintain identical electrical specifications including 1A per contact current rating, 200V voltage rating, and -40°C to 80°C operating temperature range. They are direct functional equivalents.

Q: What is the difference between these two part numbers?

A: The primary difference is packaging format. FI-SEB20P-HFE-E3000 is supplied in Tape & Reel format, while FI-SEB20P-HFE is supplied in Strip format. Electrical and mechanical specifications are identical.

Q: Can I use FI-SEB20P-HFE in place of FI-SEB20P-HFE-E3000 in my assembly?

A: Yes, provided your assembly process accommodates Strip packaging. If your production line requires Tape & Reel format for automated handling, FI-SEB20P-HFE-E3000 is the appropriate selection.

Q: Are there any compliance differences between these parts?

A: Both parts are RoHS compliant. FI-SEB20P-HFE-E3000 carries RoHS Compliant status, while FI-SEB20P-HFE carries ROHS3 Compliant status. Both meet applicable regulatory requirements.

Q: What does the shrouded 4-wall design provide?

A: The shrouded 4-wall configuration provides mechanical protection and alignment guidance during mating operations, reducing insertion errors and improving connector reliability in board-to-cable applications.

Q: Are these connectors suitable for high-temperature applications?

A: These connectors operate within the -40°C to 80°C temperature range. Applications requiring operation outside this range require alternative connector selection.