FIN1001M5 Equivalent & Substitute Parts

Part Overview

The FIN1001M5 is a 1/0 Driver LVDS interface IC in SOT-23-5 surface mount packaging manufactured by onsemi. This component is classified as obsolete, making equivalent substitute parts necessary for new designs and ongoing production support. The FIN1001M5 operates at 600 Mbps data rate with a 3V to 3.6V supply voltage range and -40°C to 85°C operating temperature specification.

Substiute Parts

FIN1001M5

onsemiIn Stock: 1298FIN1001M5 Datasheet

Current PartRFQ

FIN1001M5X

onsemiIn Stock: 17270FIN1001M5X Datasheet

SimilarRFQ

DS90LV011ATMF/NOPB

Texas InstrumentsIn Stock: 3154DS90LV011ATMF/NOPB Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FIN1001M5 is determined by the following critical parameters:

Primary Compatibility Criteria:

• Protocol: LVDS
• Number of Drivers/Receivers: 1/0
• Package / Case: SC-74A, SOT-753
• Supplier Device Package: SOT-23-5
• Voltage - Supply: 3V ~ 3.6V
• Mounting Type: Surface Mount
• Moisture Sensitivity Level (MSL): 1 (Unlimited)

Secondary Considerations:

• Data Rate: 600 Mbps (minimum acceptable threshold)
• Operating Temperature: -40°C ~ 85°C (minimum acceptable range)
• Product Status: Active status preferred for long-term availability

The FIN1001M5X and DS90LV011ATMF/NOPB meet the primary compatibility criteria. Both parts maintain identical LVDS protocol, 1/0 driver/receiver configuration, SOT-23-5 packaging, and 3V to 3.6V supply voltage specifications. Differences in data rate and operating temperature range are noted in the parameter comparison table.

Parameter Comparison

Engineering Selection Recommendations

FIN1001M5X (onsemi): This part is the direct onsemi equivalent with active product status. It maintains identical electrical specifications to the FIN1001M5 at 600 Mbps data rate and 3V to 3.6V supply voltage. The FIN1001M5X extends the operating temperature range to -40°C ~ 125°C, providing enhanced thermal performance. RoHS3 compliance certification is available. This part is recommended for applications requiring onsemi sourcing continuity and maximum thermal margin.

DS90LV011ATMF/NOPB (Texas Instruments): This part provides cross-manufacturer substitution with active product status and RoHS3 compliance. The DS90LV011ATMF/NOPB operates at 400 Mbps, which is lower than the FIN1001M5 specification of 600 Mbps. Operating temperature range matches the original part at -40°C ~ 85°C. This part is suitable for applications where data rate requirements do not exceed 400 Mbps and Texas Instruments sourcing is acceptable.

Frequently Asked Questions (FAQ)

Q: Can the FIN1001M5X directly replace the FIN1001M5 in existing designs?

A: Yes. The FIN1001M5X maintains identical LVDS protocol, 1/0 driver/receiver configuration, SOT-23-5 packaging, and 3V to 3.6V supply voltage. Pin-to-pin compatibility is preserved. The extended operating temperature range (-40°C ~ 125°C) provides additional thermal margin compared to the original -40°C ~ 85°C specification.

Q: What is the primary difference between FIN1001M5X and DS90LV011ATMF/NOPB?

A: Both parts share identical packaging, protocol, and supply voltage specifications. The key difference is data rate: FIN1001M5X operates at 600 Mbps while DS90LV011ATMF/NOPB operates at 400 Mbps. Selection depends on application bandwidth requirements and manufacturer preference.

Q: Are all substitute parts available in the same packaging?

A: Yes. All three parts use SC-74A, SOT-753 case with SOT-23-5 supplier device package designation. Surface mount assembly compatibility is maintained across all substitutes.

Q: What compliance certifications apply to these parts?

A: FIN1001M5X and DS90LV011ATMF/NOPB both carry RoHS3 compliance certification. All three parts maintain REACH Unaffected status and MSL 1 (Unlimited) moisture sensitivity rating.

Q: Is the FIN1001M5 still available for purchase?

A: The FIN1001M5 is classified as obsolete. Active substitutes (FIN1001M5X and DS90LV011ATMF/NOPB) are recommended for new designs and ongoing production requirements.