FH19SC-6S-0.5SH(19) Equivalent & Substitute Parts

Part Overview

The FH19SC-6S-0.5SH(19) is a 6-position FFC/FPC (Flat Flexible) connector manufactured by Hirose Electric Co., Ltd. This connector is classified as obsolete and is no longer in active production. Due to its obsolete status, sourcing original units becomes increasingly difficult. Identifying qualified substitute parts ensures design continuity and maintains supply chain reliability for applications requiring this connector footprint and electrical interface.

Substiute Parts

FH19SC-6S-0.5SH(19)

Hirose Electric Co., Ltd.In Stock: 1181FH19SC-6S-0.5SH(19) Datasheet

Current PartRFQ

FH19C-6S-0.5SH(10)

Hirose Electric Co LtdIn Stock: 50014FH19C-6S-0.5SH(10) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FH19SC-6S-0.5SH(19) is determined by the following critical parameters:

• Number of Positions: 6 positions (electrical interface requirement)
• Pitch: 0.020" (0.50mm) (mechanical and electrical spacing requirement)
• Connector Category: FFC/FPC (Flat Flexible) Connectors (form factor requirement)
• Manufacturer: Hirose Electric Co., Ltd. (design compatibility and footprint alignment)

The substitute part FH19C-6S-0.5SH(10) maintains identical position count and pitch specifications, ensuring mechanical and electrical compatibility with existing PCB layouts and cable assemblies designed for the original FH19SC-6S-0.5SH(19).

Parameter Comparison

Engineering Selection Recommendations

The FH19C-6S-0.5SH(10) is the qualified substitute for the obsolete FH19SC-6S-0.5SH(19). Selection of this substitute is based on:

• Active Product Status: The FH19C-6S-0.5SH(10) maintains active production status, ensuring long-term availability and supply chain stability.
• Regulatory Compliance: The substitute part is ROHS3 compliant and REACH unaffected, meeting current environmental and regulatory requirements.
• Electrical Specifications: The substitute provides 50V voltage rating and 0.5A current rating, supporting standard FFC/FPC connector applications.
• Mechanical Compatibility: Identical 6-position, 0.50mm pitch configuration ensures direct PCB footprint compatibility with designs originally specified for the FH19SC-6S-0.5SH(19).

Frequently Asked Questions (FAQ)

Q: Can the FH19C-6S-0.5SH(10) be used as a direct replacement for the FH19SC-6S-0.5SH(19)?

A: Yes. Both connectors share identical position count (6) and pitch (0.020"/0.50mm) specifications. The FH19C-6S-0.5SH(10) is designed for surface mount, right-angle mounting with bottom contacts, which aligns with standard FFC/FPC connector applications.

Q: What is the primary difference between these two part numbers?

A: The FH19SC-6S-0.5SH(19) is obsolete and no longer manufactured. The FH19C-6S-0.5SH(10) is the active equivalent from Hirose Electric, featuring current production status, ROHS3 compliance, and specified electrical ratings (50V, 0.5A).

Q: Are there any packaging differences?

A: The FH19C-6S-0.5SH(10) is supplied in Tape & Reel (TR) packaging, which is standard for surface mount connectors. Verify packaging requirements for your procurement process.

Q: Does the substitute part meet environmental compliance standards?

A: Yes. The FH19C-6S-0.5SH(10) is ROHS3 compliant and REACH unaffected, meeting current environmental regulations for electronic components.

Q: What is the mating cycle rating for the substitute part?

A: The FH19C-6S-0.5SH(10) is rated for 20 mating cycles, which is typical for FFC/FPC connectors with flip-lock mechanisms.