FH19SC-10S-0.5SH(82) Equivalent & Substitute Parts

Part Overview

The FH19SC-10S-0.5SH(82) is a 10-position FFC/FPC (Flat Flexible) connector manufactured by Hirose Electric Co Ltd, designed for surface mount applications with 0.50mm pitch spacing. This connector is classified as obsolete and is no longer in active production. Due to its obsolete status, identifying equivalent and substitute parts is essential for ongoing system maintenance, repair, and component sourcing. The recommended substitute maintains functional compatibility while offering active product status and improved availability.

Substiute Parts

FH19SC-10S-0.5SH(82)

Hirose Electric Co LtdIn Stock: 5443FH19SC-10S-0.5SH(82) Datasheet

Current PartRFQ

FH19C-10S-0.5SH(10)

Hirose Electric Co., Ltd.In Stock: 20308FH19C-10S-0.5SH(10) Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

The FH19C-10S-0.5SH(10) is identified as the manufacturer-recommended substitute for the FH19SC-10S-0.5SH(82). Substitution eligibility is determined by the following critical parameters:

• Number of Positions: Both parts maintain 10 positions
• Pitch Specification: Both parts use 0.020" (0.50mm) pitch
• Connector Category: Both are FFC/FPC (Flat Flexible) connectors
• Manufacturer: Both are manufactured by Hirose Electric Co., Ltd.
• Mounting Type: Surface mount configuration
• Termination Method: Solder termination

The substitute part represents an active product with current manufacturing support, addressing the obsolescence of the original part while preserving the core electrical and mechanical interface requirements.

Parameter Comparison

Engineering Selection Recommendations

The FH19C-10S-0.5SH(10) is the designated manufacturer substitute for the obsolete FH19SC-10S-0.5SH(82). Selection of this substitute is supported by:

• Active Product Status: The substitute maintains current manufacturing and distribution support, ensuring long-term component availability
• RoHS Compliance: The substitute meets RoHS regulatory requirements, suitable for applications requiring environmental compliance
• Electrical Specifications: The substitute provides defined voltage (50V) and current (0.5A) ratings with specified operating temperature range (-55°C ~ 85°C)
• Connector Interface Compatibility: Both parts maintain identical position count (10) and pitch specification (0.50mm), ensuring mechanical and electrical interface compatibility
• Manufacturer Support: Both parts are from Hirose Electric Co., Ltd., ensuring consistent design standards and quality assurance

Frequently Asked Questions (FAQ)

Q: Why is the FH19SC-10S-0.5SH(82) considered obsolete? A: The FH19SC-10S-0.5SH(82) has been discontinued by the manufacturer and is no longer in active production. The FH19C-10S-0.5SH(10) represents the current active equivalent.

Q: Are the FH19SC-10S-0.5SH(82) and FH19C-10S-0.5SH(10) mechanically compatible? A: Both connectors maintain 10 positions with 0.50mm pitch spacing and solder termination, providing mechanical interface compatibility for PCB mounting applications.

Q: What is the key difference between these two connector models? A: The primary difference is product status: the FH19SC-10S-0.5SH(82) is obsolete, while the FH19C-10S-0.5SH(10) is an active product with current manufacturing support and defined electrical specifications.

Q: Does the substitute part require PCB redesign? A: No redesign is required. Both parts share identical position count and pitch specifications, allowing direct substitution in existing PCB layouts.

Q: Is the substitute part RoHS compliant? A: Yes, the FH19C-10S-0.5SH(10) is RoHS compliant, meeting environmental and regulatory requirements for electronic component manufacturing.

Q: What is the moisture sensitivity level of the substitute? A: The FH19C-10S-0.5SH(10) has an MSL rating of 1 (Unlimited), indicating minimal moisture sensitivity and simplified storage requirements.