Equivalent & Substitute Parts Reference for FGR2-P

Part Overview

The FreeWave Technologies FGR2-P is an RF transceiver module designed for operation in the 902MHz ~ 928MHz frequency band, using GFSK modulation and supporting a data rate of 153.6kbps. The module features Ethernet and Serial interfaces, operates within a supply voltage of 6V ~ 30V, and is housed in a module package. The product is classified as obsolete, necessitating the identification of suitable alternatives to ensure ongoing designs and installations remain supported.

Substiute Parts

FGR2-P

FreeWave TechnologiesIn Stock: 743FGR2-P Datasheet

Current PartRFQ

Z9-P2-WL

FreeWave TechnologiesIn Stock: 1112Z9-P2-WL Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution is performed based on identical or compatible values in the following parameters: frequency range, modulation or protocol, sensitivity, data rate, interface type, and supply voltage. Substitutes are strictly selected by matching these values as provided in the input. Only parts explicitly listed with these matching criteria are considered as valid equivalents for the FGR2-P module.

Parameter Comparison

Engineering Selection Recommendations

Selection is strictly determined by product status and compliance values as provided. The FGR2-P is marked obsolete; therefore, substitutes such as Z9-P2-WL, which have an 'Active' part status, are eligible for replacement consideration within applications requiring the listed electrical and mechanical characteristics. RoHS and other compliance details should be observed as marked in the input data only.

Frequently Asked Questions (FAQ)

Q1: What are the critical matching parameters when substituting FGR2-P?
A1: Substitutes must match the frequency range (902MHz ~ 928MHz), sensitivity (-108dBm), supply voltage (6V ~ 30V), and provide equivalent interface options.

Q2: Is Z9-P2-WL a valid equivalent to FGR2-P based on provided parameters?
A2: Z9-P2-WL matches the frequency range, sensitivity, and supply voltage. Interface compatibility is validated by presence of Ethernet and Serial standards as per listed connector and protocol.

Q3: Can parts with non-matching part status be considered?
A3: Only parts listed as 'Active' are suitable substitutes for the obsolete FGR2-P according to the provided statuses.

Q4: Should supply voltage be the sole consideration for power compatibility?
A4: Supply voltage as provided (6V ~ 30V) must be strictly matched. No additional power or current information should be considered beyond the specified input.

Q5: Is RoHS compliance mandatory for substitutes?
A5: Compliance selection should be based solely on values provided in the input. No compliance requirements beyond those described should be imposed.