FGPF10N60UNDF IGBT Equivalent & Substitute Parts

Part Overview

The FGPF10N60UNDF is an NPT-type IGBT manufactured by onsemi, rated for 600V collector-emitter breakdown voltage and 20A maximum collector current with a maximum power dissipation of 42W. This component is packaged in a TO-220-3 through-hole configuration and is classified as obsolete. Due to its obsolete product status, identifying equivalent and substitute parts is necessary to maintain design continuity and ensure component availability for production and repair applications.

Substiute Parts

FGPF10N60UNDF

onsemiIn Stock: 2389FGPF10N60UNDF Datasheet

Current PartRFQ

FGP10N60UNDF

Fairchild SemiconductorIn Stock: 5321FGP10N60UNDF Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FGPF10N60UNDF is determined by alignment of the following critical electrical and mechanical parameters:

Electrical Criteria:

• Voltage rating: 600V collector-emitter breakdown voltage
• Current rating: Minimum 20A maximum collector current
• Power dissipation: Minimum 42W capability
• IGBT type classification: NPT technology

Mechanical Criteria:

• Package type: TO-220-3 through-hole configuration
• Mounting compatibility: Through-hole PCB mounting

Compliance Criteria:

• RoHS compliance status
• ECCN and HTSUS classification alignment

The FGP10N60UNDF from Fairchild Semiconductor meets the core electrical voltage and package requirements but operates at a reduced maximum collector current rating of 10A, which is below the 20A specification of the main part. This represents a functional limitation that must be evaluated within the specific application context.

Parameter Comparison

Engineering Selection Recommendations

For Direct Replacement Applications:

The FGP10N60UNDF from Fairchild Semiconductor shares identical voltage rating (600V) and package configuration (TO-220-3) with the FGPF10N60UNDF. However, the Fairchild device is rated for a maximum collector current of 10A, which is 50% lower than the onsemi part's 20A rating. Selection of this substitute is appropriate only for applications where the actual operating collector current does not exceed 10A.

Compliance Considerations:

The FGPF10N60UNDF is ROHS3 compliant with EAR99 ECCN classification. The FGP10N60UNDF carries the same EAR99 classification. RoHS compliance status for the Fairchild part is not specified in the provided data and should be verified against current component documentation if regulatory compliance is a requirement.

Product Availability:

The FGPF10N60UNDF is classified as obsolete but maintains inventory availability (2370 pieces in stock). The FGP10N60UNDF is classified as active with higher inventory availability (5300 pieces in stock), providing improved long-term sourcing stability.

Frequently Asked Questions (FAQ)

Q: Can the FGP10N60UNDF be used as a direct replacement for the FGPF10N60UNDF?

A: The FGP10N60UNDF shares the same 600V voltage rating and TO-220-3 package configuration. However, it is rated for 10A maximum collector current versus the FGPF10N60UNDF's 20A rating. Direct replacement is possible only if the application's actual collector current requirement does not exceed 10A.

Q: What is the primary difference between these two parts?

A: The primary difference is the maximum collector current rating. The FGPF10N60UNDF is rated for 20A, while the FGP10N60UNDF is rated for 10A. Both operate at 600V and use identical TO-220-3 packaging.

Q: Are there any package compatibility issues?

A: No. Both parts use the TO-220-3 through-hole package configuration and are mechanically compatible with the same PCB footprint and mounting hardware.

Q: What should be verified before selecting the FGP10N60UNDF as a substitute?

A: Verify that the application's maximum collector current requirement does not exceed 10A. Additionally, confirm RoHS compliance requirements and obtain current component datasheets from the manufacturer to validate all electrical specifications for your specific application.

Q: Why is the FGPF10N60UNDF listed as obsolete?

A: The FGPF10N60UNDF is classified as obsolete by onsemi. Despite this status, inventory remains available. For new designs or long-term production requirements, the active FGP10N60UNDF from Fairchild Semiconductor provides improved availability assurance.