FGG.2B.302.CLAD92Z Equivalent & Substitute Parts

Part Overview

The FGG.2B.302.CLAD92Z is a 2-position circular connector plug manufactured by LEMO, featuring male pins with solder cup termination. This connector is actively produced and maintains a stock inventory of 667 pieces. The connector is designed for free-hanging, in-line applications requiring shielded connections with push-pull fastening and gold-plated mating contacts. Substitute parts are identified when equivalent electrical and mechanical parameters align with the original specification, enabling component interchangeability in applications where the primary part becomes unavailable or inventory constraints require alternative sourcing.

Substiute Parts

FGG.2B.302.CLAD92Z

LEMOIn Stock: 708FGG.2B.302.CLAD92Z Datasheet

Current PartRFQ

PPCFGG2B02CLAD

BulginIn Stock: 1085PPCFGG2B02CLAD Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FGG.2B.302.CLAD92Z are identified based on the following critical parameters that determine functional equivalence:

• Connector type: Plug with male pins
• Number of positions: 2
• Termination method: Solder cup
• Fastening mechanism: Push-pull
• Shielding configuration: Shielded
• Shell material and finish: Brass with chrome plating
• Contact finish: Gold plating
• Mounting orientation: Free-hanging, in-line
• Ingress protection rating: IP50 or equivalent
• Regulatory compliance: ROHS3 and REACH status

The substitute part PPCFGG2B02CLAD from Bulgin meets these core functional criteria. Variations in cable opening dimensions, current rating tolerance, and operating temperature range represent acceptable engineering tolerances within the circular connector category for this application class.

Parameter Comparison

Engineering Selection Recommendations

Both the FGG.2B.302.CLAD92Z and PPCFGG2B02CLAD maintain active product status and full compliance with ROHS3 and REACH regulatory requirements. Selection between these parts should be based on application-specific requirements:

The FGG.2B.302.CLAD92Z operates across a wider temperature range (-55°C to 250°C) and accommodates larger cable diameters (8.20mm to 9.20mm). This configuration is suitable for applications requiring extended thermal performance or larger gauge cable integration.

The PPCFGG2B02CLAD provides a higher current rating (30A versus 25A) and operates within a standard industrial temperature range (-50°C to 200°C). This configuration is appropriate for applications with higher current demands and standard thermal operating conditions. The smaller cable opening (4.30mm to 5.00mm) requires verification against cable specifications in the target application.

Both parts share identical connector architecture, fastening mechanism, shielding configuration, and contact materials, ensuring functional compatibility within the specified parameter tolerances.

Frequently Asked Questions (FAQ)

Q: Can PPCFGG2B02CLAD be used as a direct replacement for FGG.2B.302.CLAD92Z?

A: Functional substitution is possible when application requirements fall within the operating parameters of the PPCFGG2B02CLAD. The cable opening dimension (4.30mm to 5.00mm) must accommodate the cable gauge specified in the original application. The operating temperature range (-50°C to 200°C) must satisfy thermal requirements. The current rating of 30A exceeds the original 25A specification, providing margin in this parameter.

Q: What are the critical differences between these two connectors?

A: The primary differences are cable opening dimensions, operating temperature range, and current rating. The FGG.2B.302.CLAD92Z accommodates larger cables and operates at higher temperatures. The PPCFGG2B02CLAD provides higher current capacity. All other electrical and mechanical parameters are equivalent.

Q: Are both connectors RoHS and REACH compliant?

A: Yes. Both FGG.2B.302.CLAD92Z and PPCFGG2B02CLAD are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and distribution.

Q: What determines whether a substitute part is acceptable?

A: Substitution acceptability is determined by matching connector type, pin count, termination method, fastening mechanism, shielding configuration, shell material and finish, contact finish, mounting orientation, and ingress protection rating. Application-specific parameters such as cable diameter, operating temperature, and current requirements must fall within the substitute part's rated specifications.

Q: Is the difference in contact finish thickness significant?

A: The contact finish thickness differs between parts (39.4µin for LEMO versus 3.00µin for Bulgin). Both values provide adequate gold plating for mating contact durability. The thickness difference reflects manufacturing process variation within acceptable engineering tolerances for this connector category.