FGG.0B.307.CLAD35Z Equivalent & Substitute Parts

Part Overview

The FGG.0B.307.CLAD35Z is a 7-position circular connector plug manufactured by LEMO, featuring male pins with solder cup termination. This connector is classified as a push-pull fastening type with shielded construction and gold-plated mating contacts. The part is currently active in production with 815 units in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when application requirements align with alternative connector specifications.

Substiute Parts

FGG.0B.307.CLAD35Z

LEMOIn Stock: 834FGG.0B.307.CLAD35Z Datasheet

Current PartRFQ

S20L0C-P07MCC0-420S

ODUIn Stock: 1197S20L0C-P07MCC0-420S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FGG.0B.307.CLAD35Z is determined by the following critical parameters:

• Connector Type & Position Count: Must be plug configuration with 7 male pins
• Termination Method: Solder cup termination required
• Fastening Mechanism: Push-pull fastening type
• Contact Material & Finish: Brass with gold-plated mating surface
• Shell Construction: Brass shell with protective finish
• Shielding: Shielded configuration
• Ingress Protection: IP50 dust protection rating
• Compliance: ROHS3 compliant, REACH unaffected

The substitute part S20L0C-P07MCC0-420S meets these core substitution criteria. Variations in shell size designation, operating temperature range, current rating, and backshell material do not preclude substitution when the application requirements align with the substitute part's specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the FGG.0B.307.CLAD35Z and S20L0C-P07MCC0-420S are active production parts with ROHS3 compliance and REACH unaffected status. Selection between these parts depends on application-specific requirements:

The FGG.0B.307.CLAD35Z supports an extended operating temperature range of -55°C to 250°C, making it suitable for high-temperature applications. The S20L0C-P07MCC0-420S operates within -40°C to 120°C and provides a higher current rating of 4A compared to the 2.5A rating of the LEMO part. Both connectors feature identical core specifications: 7-position solder cup termination, push-pull fastening, brass construction with gold-plated contacts, and IP50 ingress protection.

Frequently Asked Questions (FAQ)

Q: Can the S20L0C-P07MCC0-420S replace the FGG.0B.307.CLAD35Z in all applications?

A: Substitution is valid when the application operating temperature does not exceed 120°C and current requirements do not exceed 4A. The FGG.0B.307.CLAD35Z is required for applications requiring temperatures above 120°C or operating at the lower -55°C extreme.

Q: What are the key compatibility factors between these two connectors?

A: Both connectors share identical connector type (7-position plug with male pins), termination method (solder cup), fastening mechanism (push-pull), shell material (brass with gold-plated contacts), and ingress protection rating (IP50). These parameters ensure mechanical and electrical compatibility in equivalent applications.

Q: Are there packaging differences between these parts?

A: The FGG.0B.307.CLAD35Z is supplied in standard packaging, while the S20L0C-P07MCC0-420S is supplied in bulk packaging. This distinction affects procurement and inventory management but does not impact connector functionality or performance.

Q: Do both parts meet the same compliance standards?

A: Yes. Both the FGG.0B.307.CLAD35Z and S20L0C-P07MCC0-420S are ROHS3 compliant and REACH unaffected, meeting equivalent regulatory requirements for industrial and commercial applications.

Q: What is the significance of the different current ratings?

A: The FGG.0B.307.CLAD35Z is rated for 2.5A, while the S20L0C-P07MCC0-420S is rated for 4A. Applications requiring current levels between 2.5A and 4A can utilize the substitute part. Applications limited to 2.5A or below can use either connector.