FGG.0B.306.CLAD56Z Equivalent & Substitute Parts

Part Overview

The FGG.0B.306.CLAD56Z is a 6-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is classified as a push-pull fastening circular connector with shielded design, suitable for applications requiring robust electrical connections in harsh environments. The part is currently active in production with 816 units in stock. Substitute parts are identified when equivalent electrical and mechanical parameters are required due to component availability, supply chain considerations, or application-specific requirements.

Substiute Parts

FGG.0B.306.CLAD56Z

LEMOIn Stock: 844FGG.0B.306.CLAD56Z Datasheet

Current PartRFQ

S20L0C-P06MCC0-560S

ODUIn Stock: 1077S20L0C-P06MCC0-560S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FGG.0B.306.CLAD56Z is determined by the following critical parameters:

• Connector Type & Gender: Must be Plug with Male Pins
• Position Count: Must be 6 positions
• Termination Method: Must be Solder Cup
• Fastening Mechanism: Must be Push-Pull
• Shielding: Must be Shielded
• Contact Finish: Must be Gold for mating surfaces
• Ingress Protection: Must meet or exceed IP50
• Regulatory Compliance: Must be ROHS3 Compliant and REACH Unaffected

The substitute part S20L0C-P06MCC0-560S (ODU MINI-SNAP® L series) meets these core electrical and mechanical requirements, enabling functional equivalence in applications where the FGG.0B.306.CLAD56Z is specified.

Parameter Comparison

Engineering Selection Recommendations

Both the FGG.0B.306.CLAD56Z and S20L0C-P06MCC0-560S are active production parts with ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements.

Selection Criteria:

• FGG.0B.306.CLAD56Z is appropriate for applications requiring extended operating temperature range (-55°C to 250°C) or where LEMO series compatibility is mandated by design specification.

• S20L0C-P06MCC0-560S is appropriate for applications where higher current capacity (4A vs 2.5A) is beneficial and operating temperature range (-40°C to 120°C) is acceptable. This part includes integrated strain relief and backshell features.

Both parts satisfy the core functional requirements of 6-position, male-pin, solder cup, push-pull, shielded circular connectors with gold-plated contacts and IP50 ingress protection.

Frequently Asked Questions (FAQ)

Q: Can S20L0C-P06MCC0-560S be used as a direct replacement for FGG.0B.306.CLAD56Z?

A: Yes, for applications where the operating temperature range of -40°C to 120°C is acceptable. Both connectors share identical connector type, position count, termination method, fastening mechanism, shielding, contact finish, and ingress protection rating. The ODU part provides higher current capacity (4A vs 2.5A).

Q: What are the key differences between these two parts?

A: The primary differences are operating temperature range (LEMO: -55°C to 250°C; ODU: -40°C to 120°C), current rating (LEMO: 2.5A; ODU: 4A), shell finish (LEMO: Chrome; ODU: Chrome over Nickel), and cable opening tolerance (LEMO: 5.30-5.60mm; ODU: 5.00-5.60mm). The ODU part includes strain relief features.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both FGG.0B.306.CLAD56Z and S20L0C-P06MCC0-560S are ROHS3 compliant and REACH unaffected.

Q: What is the cable opening specification and does it affect substitution?

A: Cable opening specifications define the acceptable cable diameter range for proper connector seating. FGG.0B.306.CLAD56Z accepts 5.30-5.60mm; S20L0C-P06MCC0-560S accepts 5.00-5.60mm. The overlapping range (5.30-5.60mm) ensures compatibility for standard cable sizes within both specifications.

Q: Does the difference in shell finish affect electrical performance?

A: Shell finish (Chrome vs Chrome over Nickel) does not affect electrical performance. Both finishes provide equivalent corrosion resistance and shielding effectiveness for the specified applications.