FGG.0B.306.CLAD52 Equivalent & Substitute Parts

Part Overview

The FGG.0B.306.CLAD52 is a 6-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring shielded, push-pull fastening with gold-plated mating contacts and operates across a wide temperature range of -55°C to 250°C. The part is currently active in production with 718 units in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit functional alternatives.

Substiute Parts

FGG.0B.306.CLAD52

LEMOIn Stock: 813FGG.0B.306.CLAD52 Datasheet

Current PartRFQ

S10L0C-P06MCC0-5200

ODUIn Stock: 726S10L0C-P06MCC0-5200 Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FGG.0B.306.CLAD52 is determined by the following critical parameters:

• Connector Type & Pin Configuration: Plug with male pins, 6-position configuration
• Termination Method: Solder cup termination for PCB or cable assembly
• Fastening Mechanism: Push-pull coupling system
• Electrical Performance: Gold-plated mating contacts with shielded design
• Environmental Protection: IP50 dust protection rating
• Compliance: ROHS3 compliance and REACH unaffected status

The substitute part S10L0C-P06MCC0-5200 (ODU MINI-SNAP® L series) meets these core substitution criteria. Both parts share identical connector type, pin count, termination method, fastening type, contact finish, shielding, and compliance certifications.

Parameter Comparison

Engineering Selection Recommendations

Both the FGG.0B.306.CLAD52 and S10L0C-P06MCC0-5200 are active production parts with ROHS3 compliance and REACH unaffected status, making them suitable for regulated applications. The ODU substitute part provides a higher current rating of 4A compared to the LEMO part's 2.5A rating, offering additional electrical capacity for applications within its operating temperature range. The LEMO part supports a wider operating temperature range (-55°C to 250°C) compared to the ODU part (-40°C to 120°C). Selection between these parts should be based on specific application requirements regarding temperature extremes and current demands. Both parts maintain identical connector architecture, pin configuration, and environmental protection ratings.

Frequently Asked Questions (FAQ)

Q: Can the S10L0C-P06MCC0-5200 be used as a direct replacement for the FGG.0B.306.CLAD52?

A: The S10L0C-P06MCC0-5200 is functionally compatible as a substitute based on matching connector type, pin count, termination method, fastening mechanism, and environmental protection rating. However, application-specific requirements regarding operating temperature range and current capacity must be verified before substitution.

Q: What are the key differences between these two parts?

A: The primary differences are: (1) Operating temperature range—LEMO supports -55°C to 250°C while ODU supports -40°C to 120°C; (2) Current rating—ODU provides 4A versus LEMO's 2.5A; (3) Shell finish—LEMO uses chrome while ODU uses chrome over nickel.

Q: Are both parts compliant with industry standards?

A: Both parts are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic components.

Q: What is the cable opening tolerance for each part?

A: FGG.0B.306.CLAD52 cable opening is 0.165" to 0.205" (4.20mm to 5.20mm). S10L0C-P06MCC0-5200 cable opening is 0.157" to 0.205" (4.00mm to 5.20mm). The ODU part accommodates slightly smaller cable diameters at the lower end of the range.

Q: Which part should be selected for high-temperature applications?

A: The FGG.0B.306.CLAD52 is the appropriate choice for applications requiring operation above 120°C, as it supports temperatures up to 250°C.

Q: Which part should be selected for high-current applications?

A: The S10L0C-P06MCC0-5200 is suitable for applications requiring current capacity above 2.5A, as it is rated for 4A.