FGG.0B.306.CLAD25Z Equivalent & Substitute Parts

Part Overview

The FGG.0B.306.CLAD25Z is a 6-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is classified as a push-pull fastening circular connector with shielded design, suitable for applications requiring robust electrical connections in harsh environments. The part is currently active in production with 1016 units in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit functional alternatives.

Substiute Parts

FGG.0B.306.CLAD25Z

LEMOIn Stock: 1080FGG.0B.306.CLAD25Z Datasheet

Current PartRFQ

S20L0C-P06MCC0-320S

ODUIn Stock: 864S20L0C-P06MCC0-320S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FGG.0B.306.CLAD25Z is determined by the following critical parameters:

• Connector Type & Configuration: Plug with male pins, 6-position circular connector
• Termination Method: Solder cup termination
• Fastening Mechanism: Push-pull fastening system
• Electrical Performance: Current rating and contact material compatibility
• Environmental Protection: IP50 dust protection rating
• Material Specifications: Brass shell with gold-plated mating contacts
• Compliance: ROHS3 compliance and REACH unaffected status

The substitute part S20L0C-P06MCC0-320S from ODU meets these core functional requirements as a 6-position circular connector plug with male pins, solder cup termination, push-pull fastening, shielded design, and equivalent material specifications.

Parameter Comparison

Engineering Selection Recommendations

Both the FGG.0B.306.CLAD25Z and S20L0C-P06MCC0-320S are active production parts with ROHS3 compliance and REACH unaffected status, ensuring regulatory alignment for current applications.

The FGG.0B.306.CLAD25Z operates across a wider temperature range (-55°C to 250°C) compared to the ODU substitute (-40°C to 120°C). Applications requiring extended high-temperature operation above 120°C must retain the LEMO part.

The S20L0C-P06MCC0-320S provides a higher current rating of 4A versus the LEMO part's 2.5A rating. For applications operating within the ODU temperature range and requiring higher current capacity, the substitute part offers enhanced electrical performance.

Both connectors feature identical core specifications: 6-position configuration, solder cup termination, push-pull fastening, shielded design, brass construction with gold-plated contacts, and IP50 ingress protection.

Frequently Asked Questions (FAQ)

Q: Can the S20L0C-P06MCC0-320S directly replace the FGG.0B.306.CLAD25Z?

A: Direct mechanical and electrical substitution is possible when operating temperature requirements do not exceed 120°C and current demands do not exceed 4A. Both parts share identical connector type, pin configuration, termination method, and fastening mechanism. Physical compatibility depends on mating connector design and mechanical envelope constraints specific to the application.

Q: What are the key differences between these two parts?

A: The primary differences are operating temperature range (LEMO: -55°C to 250°C; ODU: -40°C to 120°C) and current rating (LEMO: 2.5A; ODU: 4A). Shell finish differs slightly (LEMO: Chrome; ODU: Chrome over Nickel). The ODU part includes strain relief features not specified for the LEMO connector.

Q: Are both parts RoHS and REACH compliant?

A: Yes, both the FGG.0B.306.CLAD25Z and S20L0C-P06MCC0-320S are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component sourcing.

Q: What packaging options are available?

A: The FGG.0B.306.CLAD25Z is available in standard packaging. The S20L0C-P06MCC0-320S is supplied in bulk packaging.

Q: How do the cable opening specifications compare?

A: FGG.0B.306.CLAD25Z: 0.091" ~ 0.126" (2.30mm ~ 3.20mm); S20L0C-P06MCC0-320S: 0.079" ~ 0.126" (2.00mm ~ 3.20mm). The ODU part accommodates slightly smaller cable diameters at the lower end of the range.