FGG.0B.305.CLAD35Z Equivalent & Substitute Parts

Part Overview

The FGG.0B.305.CLAD35Z is a 5-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is classified as a push-pull fastening circular connector with shielded design, suitable for applications requiring robust electrical connections in harsh environments. The part maintains active product status with 794 units in current inventory. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when system requirements permit interchangeability based on electrical and mechanical compatibility.

Key Parameters

Parameter	Value
Manufacturer Part Number	FGG.0B.305.CLAD35Z
Manufacturer	LEMO
Category	Circular Connectors
Connector Type	Plug, Male Pins
Number of Positions	5
Termination	Solder Cup
Fastening Type	Push-Pull
Shell Material	Brass
Shell Finish	Chrome
Contact Finish - Mating	Gold
Ingress Protection	IP50 - Dust Protected
Current Rating	6.5A
Operating Temperature	-55°C ~ 250°C
Cable Opening	0.130" ~ 0.165" (3.30mm ~ 4.20mm)
Shielding	Shielded
Insert Material	Polyetheretherketone (PEEK)
RoHS Status	ROHS3 Compliant
Product Status	Active

Substitute Part Grouping Explanation

Substitution eligibility for the FGG.0B.305.CLAD35Z is determined by the following critical parameters:

Connector Type & Position Count: Must be plug with male pins, 5-position configuration
Termination Method: Solder cup termination required
Fastening Mechanism: Push-pull fastening type
Contact System: Gold-plated mating surface on brass contacts
Ingress Protection: IP50 minimum dust protection
Insert Material: PEEK material for electrical isolation
Shielding: Shielded design for EMI/RFI protection
Compliance: ROHS3 compliant, REACH unaffected

The substitute part S20L0C-P05MFG0-420S (ODU MINI-SNAP® L series) meets these core substitution criteria. Both connectors share identical functional requirements for 5-position male pin solder cup connections with push-pull engagement, gold contact plating, PEEK inserts, and equivalent compliance certifications.

Parameter Comparison

Parameter	FGG.0B.305.CLAD35Z (LEMO)	S20L0C-P05MFG0-420S (ODU)	Compatibility Notes
Connector Type	Plug, Male Pins	Plug, Male Pins	Identical
Number of Positions	5	5	Identical
Termination	Solder Cup	Solder Cup	Identical
Fastening Type	Push-Pull	Push-Pull	Identical
Shell Material	Brass	Brass	Identical
Shell Finish	Chrome	Chrome over Nickel	Both provide corrosion resistance; ODU includes nickel underplate
Contact Finish - Mating	Gold	Gold	Identical
Ingress Protection	IP50 - Dust Protected	IP50 - Dust Protected	Identical
Current Rating	6.5A	7.5A	ODU rated higher; LEMO rating applies for direct substitution
Operating Temperature	-55°C ~ 250°C	-40°C ~ 120°C	LEMO supports extended temperature range; ODU suitable for standard industrial range
Cable Opening	0.130" ~ 0.165" (3.30mm ~ 4.20mm)	0.118" ~ 0.165" (3.00mm ~ 4.20mm)	Overlapping range; ODU accepts slightly smaller cables
Insert Material	Polyetheretherketone (PEEK)	Polyetheretherketone (PEEK)	Identical
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	Identical
REACH Status	REACH Unaffected	REACH Unaffected	Identical
Product Status	Active	Active	Both actively manufactured

Engineering Selection Recommendations

Primary Part (FGG.0B.305.CLAD35Z - LEMO): Select when extended operating temperature range (-55°C to 250°C) is required or when LEMO connector ecosystem integration is specified. ROHS3 compliant and REACH unaffected status confirmed.

Substitute Part (S20L0C-P05MFG0-420S - ODU MINI-SNAP® L): Select when standard industrial temperature range (-40°C to 120°C) is acceptable and higher current capacity (7.5A vs 6.5A) provides design margin. ROHS3 compliant and REACH unaffected status confirmed. Both parts maintain active product status with current manufacturing support.

Selection between these parts depends on application-specific temperature and current requirements. Both connectors satisfy the core functional requirements of 5-position male pin solder cup connections with push-pull engagement, gold contact plating, PEEK inserts, IP50 ingress protection, and equivalent regulatory compliance.

Frequently Asked Questions (FAQ)

Q: Can S20L0C-P05MFG0-420S directly replace FGG.0B.305.CLAD35Z in all applications?

A: Direct substitution is valid when the application operates within the ODU part's temperature range (-40°C to 120°C) and current requirements do not exceed 6.5A. If the application requires the extended temperature range (-55°C to 250°C) of the LEMO part, the ODU substitute is not suitable.

Q: What are the key differences between these two connectors?

A: The primary differences are operating temperature range and current rating. The LEMO FGG.0B.305.CLAD35Z supports -55°C to 250°C with 6.5A rating. The ODU S20L0C-P05MFG0-420S supports -40°C to 120°C with 7.5A rating. Both share identical connector type, position count, termination method, fastening mechanism, contact plating, and ingress protection.

Q: Are the cable opening specifications compatible?

A: The cable opening ranges overlap. LEMO accepts 0.130" to 0.165" (3.30mm to 4.20mm), while ODU accepts 0.118" to 0.165" (3.00mm to 4.20mm). The ODU part accommodates slightly smaller cable diameters within the overlapping range.

Q: Do both parts meet the same regulatory requirements?

A: Both parts are ROHS3 compliant and REACH unaffected. Both maintain active product status with current manufacturing support and equivalent compliance certifications.

Q: Which part should be selected for high-temperature applications?

A: The LEMO FGG.0B.305.CLAD35Z is required for applications exceeding 120°C, as it supports operating temperatures up to 250°C. The ODU substitute is limited to 120°C maximum.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message