FGG.0B.305.CLAD32Z Equivalent & Substitute Parts

Part Overview

The FGG.0B.305.CLAD32Z is a 5-position circular connector plug manufactured by LEMO, featuring male pins with solder cup termination. This connector is classified as a metal circular connector with push-pull fastening, designed for free-hanging in-line mounting applications. The part maintains active product status and is available in bulk packaging with 803 pieces in current inventory.

Substitute parts are identified when equivalent circular connectors meet the same functional requirements across critical electrical and mechanical parameters, including connector type, position count, termination method, fastening mechanism, and environmental ratings.

Substiute Parts

FGG.0B.305.CLAD32Z

LEMOIn Stock: 898FGG.0B.305.CLAD32Z Datasheet

Current PartRFQ

S20L0C-P05MFG0-320S

ODUIn Stock: 1101S20L0C-P05MFG0-320S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FGG.0B.305.CLAD32Z is determined by strict alignment with the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Plug, Male Pins
• Number of Positions: 5
• Termination Method: Solder Cup
• Fastening Type: Push-Pull
• Mounting Type: Free Hanging (In-Line)
• Shielding: Shielded
• Insert Material: Polyetheretherketone (PEEK)
• Contact Finish - Mating: Gold
• Ingress Protection: IP50 - Dust Protected

Allowable Parameter Variations: Substitute parts may differ in shell size designation, operating temperature range, current rating, and shell finish specifications, provided the connector maintains functional compatibility with the mating interface and environmental requirements of the application.

The ODU MINI-SNAP® L series connector S20L0C-P05MFG0-320S qualifies as a substitute based on matching all mandatory parameters while maintaining equivalent electrical and mechanical performance characteristics.

Parameter Comparison

Engineering Selection Recommendations

Both the FGG.0B.305.CLAD32Z and S20L0C-P05MFG0-320S maintain active product status and are available in bulk inventory. Selection between these parts is based on application-specific environmental and electrical requirements.

FGG.0B.305.CLAD32Z (LEMO) is suitable for applications requiring extended operating temperature range (-55°C to 250°C) and is specified where the full temperature envelope is a design requirement.

S20L0C-P05MFG0-320S (ODU) is suitable for applications operating within the -40°C to 120°C temperature range and offers higher current capacity (7.5A versus 6.5A). This connector includes integrated strain relief and is RoHS3 compliant with REACH unaffected status.

Both connectors carry EAR99 ECCN classification and share identical HTSUS code 8536.69.4020. Selection should be based on specific application temperature requirements and compliance certifications needed for the end-use environment.

Frequently Asked Questions (FAQ)

Q: Can S20L0C-P05MFG0-320S directly replace FGG.0B.305.CLAD32Z in all applications?

A: Direct replacement is valid when the application operates within the -40°C to 120°C temperature range. Applications requiring operation below -40°C or above 120°C must use the FGG.0B.305.CLAD32Z due to its extended operating temperature specification of -55°C to 250°C.

Q: What are the key compatibility factors between these two connectors?

A: Both connectors share identical connector type (plug, male pins), position count (5), termination method (solder cup), fastening mechanism (push-pull), shielding configuration, and insert material (PEEK). These parameters ensure mechanical and electrical interface compatibility.

Q: Are there differences in cable opening specifications?

A: Yes. The FGG.0B.305.CLAD32Z accepts cable diameters of 0.087" to 0.126" (2.20mm to 3.20mm), while the S20L0C-P05MFG0-320S accepts 0.079" to 0.126" (2.00mm to 3.20mm). Cable diameter must fall within the specified range for the selected connector.

Q: What is the current rating difference and does it affect substitution?

A: The S20L0C-P05MFG0-320S has a higher current rating of 7.5A compared to 6.5A for the FGG.0B.305.CLAD32Z. For applications requiring 6.5A or less, the ODU connector is suitable. Applications requiring higher current capacity benefit from the ODU connector's increased rating.

Q: Are there compliance or certification differences?

A: Both connectors carry EAR99 ECCN classification. The S20L0C-P05MFG0-320S is RoHS3 compliant with REACH unaffected status and MSL 1 (unlimited) moisture sensitivity level. Compliance requirements for the specific application should determine part selection.

Q: What additional features does the ODU connector provide?

A: The S20L0C-P05MFG0-320S includes integrated strain relief in addition to the backshell, whereas the FGG.0B.305.CLAD32Z features backshell only. Strain relief provides additional mechanical protection for the cable assembly.