FGG.0B.305.CLAD31Z Equivalent & Substitute Parts

Part Overview

The FGG.0B.305.CLAD31Z is a 5-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is classified as a push-pull fastening circular connector with shielded design, suitable for applications requiring robust electrical connections in harsh environments. The part maintains Active product status with 974 units in current inventory. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component interchange based on electrical and mechanical compatibility.

Substiute Parts

FGG.0B.305.CLAD31Z

LEMOIn Stock: 1053FGG.0B.305.CLAD31Z Datasheet

Current PartRFQ

S20L0C-P05MFG0-320S

ODUIn Stock: 1101S20L0C-P05MFG0-320S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FGG.0B.305.CLAD31Z is determined by the following critical parameters:

Mandatory Matching Parameters:

• Connector Type: Plug, Male Pins
• Number of Positions: 5
• Termination Type: Solder Cup
• Fastening Type: Push-Pull
• Shielding: Shielded
• Contact Finish: Gold
• Ingress Protection: IP50 - Dust Protected

Compatible Variation Parameters:

• Current Rating: Substitute must meet or exceed 6.5A
• Operating Temperature Range: Substitute must cover the required operational envelope or a subset thereof
• Shell Material: Brass construction acceptable
• Contact Material: Brass construction acceptable
• RoHS and REACH Compliance: Must maintain ROHS3 Compliant and REACH Unaffected status

The substitute part S20L0C-P05MFG0-320S (ODU MINI-SNAP® L series) satisfies all mandatory matching parameters and maintains compliance certifications. Variations in operating temperature range and current rating are noted in the parameter comparison table below.

Parameter Comparison

Engineering Selection Recommendations

Primary Part Selection (FGG.0B.305.CLAD31Z): Select the LEMO FGG.0B.305.CLAD31Z when applications require the full operating temperature range of -55°C to 250°C. This part is Active status with established supply availability (974 units in stock). ROHS3 compliance and REACH Unaffected status satisfy regulatory requirements for industrial and commercial applications.

Substitute Part Selection (S20L0C-P05MFG0-320S): The ODU MINI-SNAP® L series connector S20L0C-P05MFG0-320S is suitable as a substitute when operating temperature requirements fall within the -40°C to 120°C range. This part exceeds the current rating requirement (7.5A vs. 6.5A) and provides enhanced corrosion protection through chrome-over-nickel shell finish. Active product status and full compliance certifications (ROHS3, REACH Unaffected) are maintained. Current inventory availability is 1050 units.

Selection Criteria:

• If application operates below -40°C or above 120°C, the primary LEMO part is required.
• If application operates within -40°C to 120°C range, either part is electrically and mechanically compatible.
• Both parts maintain identical connector interface geometry, pin configuration, and solder cup termination specifications.
• Both parts are suitable for industrial, medical, military, and testing equipment applications based on provided compliance data.

Frequently Asked Questions (FAQ)

Q: Can the S20L0C-P05MFG0-320S substitute for the FGG.0B.305.CLAD31Z in all applications?

A: Substitution is valid only when the application operating temperature remains within -40°C to 120°C. If the application requires operation below -40°C or above 120°C, the LEMO part must be used. Both parts are electrically and mechanically compatible within this temperature constraint.

Q: What are the key differences between these two connectors?

A: The primary differences are operating temperature range and shell finish. The LEMO part operates from -55°C to 250°C with chrome finish, while the ODU part operates from -40°C to 120°C with chrome-over-nickel finish. The ODU part provides higher current rating (7.5A vs. 6.5A). All other electrical and mechanical parameters are identical.

Q: Are both parts RoHS and REACH compliant?

A: Yes. Both the FGG.0B.305.CLAD31Z and S20L0C-P05MFG0-320S are ROHS3 Compliant and REACH Unaffected, meeting current regulatory requirements for electronic component sourcing.

Q: What is the cable opening specification for each part?

A: The LEMO FGG.0B.305.CLAD31Z accepts cable diameters of 0.091" to 0.126" (2.30mm to 3.20mm). The ODU S20L0C-P05MFG0-320S accepts cable diameters of 0.079" to 0.126" (2.00mm to 3.20mm). The ODU part accommodates slightly smaller minimum cable diameter.

Q: Can these connectors be used interchangeably in existing designs?

A: Mechanical and electrical interchange is possible when operating temperature requirements are satisfied. Both connectors use identical push-pull fastening, 5-position solder cup termination, and shielded design. Physical dimensions and pin layouts are compatible. Verify cable opening specifications match your cable diameter requirements before implementation.

Q: What inventory levels are available for each part?

A: The LEMO FGG.0B.305.CLAD31Z has 974 units in current stock. The ODU S20L0C-P05MFG0-320S has 1050 units in current stock. Both parts are classified as New Original inventory.