FGG.0B.304.CLAD35Z Equivalent & Substitute Parts

Part Overview

The FGG.0B.304.CLAD35Z is a 4-position circular connector plug manufactured by LEMO, featuring male pins with solder cup termination. This connector is classified as a push-pull fastening circular connector with shielded design, suitable for applications requiring robust electrical connections in harsh environments. The part maintains active product status with 880 units in current inventory. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component substitution within specified electrical and mechanical parameters.

Substiute Parts

FGG.0B.304.CLAD35Z

LEMOIn Stock: 905FGG.0B.304.CLAD35Z Datasheet

Current PartRFQ

S20L0C-P04MFG0-420S

ODUIn Stock: 802S20L0C-P04MFG0-420S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FGG.0B.304.CLAD35Z is determined by the following critical parameters:

• Connector type: Plug with male pins
• Position count: 4 positions
• Termination method: Solder cup
• Fastening mechanism: Push-pull
• Shielding configuration: Shielded design
• Contact finish: Gold plating on mating surfaces
• Shell material: Brass with chrome finish
• Insert material: Polyetheretherketone (PEEK)
• Ingress protection rating: IP50 minimum
• RoHS compliance: ROHS3 Compliant

The substitute part S20L0C-P04MFG0-420S (ODU MINI-SNAP® L series) satisfies all critical substitution criteria. Both connectors share identical connector type, position count, termination method, fastening type, shielding, contact finish material, shell composition, insert material, ingress protection rating, and regulatory compliance status.

Parameter Comparison

Engineering Selection Recommendations

Both the FGG.0B.304.CLAD35Z and S20L0C-P04MFG0-420S maintain active product status with full regulatory compliance under ROHS3 and REACH standards. Selection between these parts depends on application-specific requirements:

The FGG.0B.304.CLAD35Z supports extended operating temperature range (-55°C to 250°C) and is suitable for applications requiring extreme thermal performance. The S20L0C-P04MFG0-420S operates within -40°C to 120°C and provides marginally higher current capacity at 7.5A versus 7A. Both connectors are electrically and mechanically compatible for standard industrial applications within the ODU substitute's temperature specification.

Frequently Asked Questions (FAQ)

Q: Can S20L0C-P04MFG0-420S replace FGG.0B.304.CLAD35Z in all applications?

A: Substitution is valid when the application operating temperature does not exceed 120°C. The FGG.0B.304.CLAD35Z is required for applications operating below -40°C or above 120°C.

Q: Are the solder cup terminations mechanically compatible?

A: Both connectors feature solder cup termination with compatible cable opening ranges (3.00mm to 4.20mm overlap). Verify cable diameter falls within both specifications before substitution.

Q: Do both parts meet the same regulatory requirements?

A: Yes. Both FGG.0B.304.CLAD35Z and S20L0C-P04MFG0-420S are ROHS3 compliant and REACH unaffected.

Q: What is the difference in shell finish?

A: FGG.0B.304.CLAD35Z uses chrome finish on brass. S20L0C-P04MFG0-420S uses chrome over nickel on brass. Both provide equivalent corrosion protection for standard industrial environments.

Q: Are there differences in current-carrying capacity?

A: FGG.0B.304.CLAD35Z is rated at 7A; S20L0C-P04MFG0-420S is rated at 7.5A. Both ratings are suitable for standard signal and low-power applications.