FGG.0B.302.CLAD35Z Equivalent & Substitute Parts

Part Overview

The FGG.0B.302.CLAD35Z is a 2-position circular connector plug manufactured by LEMO, featuring male pins with solder cup termination. This connector is designed for applications requiring push-pull fastening, shielded construction, and reliable electrical connections in demanding environments. The part is currently active in production with 993 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component selection from qualified manufacturers.

Substiute Parts

FGG.0B.302.CLAD35Z

LEMOIn Stock: 1038FGG.0B.302.CLAD35Z Datasheet

Current PartRFQ

S20L0C-P02MJG0-420S

ODUIn Stock: 949S20L0C-P02MJG0-420S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FGG.0B.302.CLAD35Z is determined by the following critical parameters:

• Connector Type & Configuration: Plug with male pins, 2-position circular connector
• Termination Method: Solder cup for direct wire attachment
• Fastening Mechanism: Push-pull coupling system
• Electrical Performance: Gold-plated mating contacts for reliable signal transmission
• Environmental Protection: Shielded construction with IP50 ingress protection rating
• Compliance: ROHS3 compliance and REACH unaffected status

The substitute part S20L0C-P02MJG0-420S from ODU meets these core functional requirements. However, differences exist in current rating, operating temperature range, and shell finish specifications that must be evaluated for specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the FGG.0B.302.CLAD35Z and S20L0C-P02MJG0-420S are ROHS3 compliant and REACH unaffected, meeting current regulatory requirements for electronic component manufacturing and use.

The FGG.0B.302.CLAD35Z is suitable for applications requiring extended temperature operation (-55°C to 250°C) and higher current capacity (10A). The S20L0C-P02MJG0-420S operates within a narrower temperature range (-40°C to 120°C) with a reduced current rating of 7.5A, making it appropriate for standard industrial, medical, military, and testing equipment applications within these specified limits.

Selection between these parts should be based on the specific thermal and electrical requirements of the target application. Both connectors provide equivalent mechanical compatibility through identical push-pull fastening, 2-position configuration, and solder cup termination.

Frequently Asked Questions (FAQ)

Q: Can the S20L0C-P02MJG0-420S directly replace the FGG.0B.302.CLAD35Z in all applications?

A: Direct substitution is possible only when the application operates within the S20L0C-P02MJG0-420S specifications: maximum current draw of 7.5A and operating temperatures between -40°C and 120°C. Applications requiring the extended temperature range or higher current capacity of the FGG.0B.302.CLAD35Z require the original part.

Q: What are the mechanical compatibility considerations?

A: Both connectors feature identical push-pull fastening mechanisms, 2-position circular plug configurations with male pins, and solder cup termination. Mechanical mating and cable attachment procedures are equivalent between the two parts.

Q: Are there differences in contact reliability between these parts?

A: Both connectors use gold-plated brass contacts with identical mating surface finish specifications. Contact reliability is equivalent for applications within the specified operating parameters of each part.

Q: What is the significance of the shell finish difference?

A: The FGG.0B.302.CLAD35Z uses chrome plating directly on brass, while the S20L0C-P02MJG0-420S uses chrome over nickel plating. Both finishes provide equivalent corrosion resistance and environmental protection at IP50 ingress protection rating.

Q: Are both parts suitable for industrial and medical applications?

A: Both parts meet ROHS3 and REACH compliance requirements. The FGG.0B.302.CLAD35Z is suitable for applications with extended temperature requirements. The S20L0C-P02MJG0-420S is explicitly rated for industrial, medical, military, and testing equipment applications within its specified operating range.