LEMO FGG.00.303.CLAD30Z Equivalent & Substitute Parts

Part Overview

The LEMO FGG.00.303.CLAD30Z is a 3-position circular connector plug with male pins and solder cup termination. This connector is designed for applications requiring push-pull fastening, shielded construction, and reliable electrical connections in harsh environments. The part is currently active in production with 692 units in stock. Substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design flexibility permits component interchange.

Substiute Parts

FGG.00.303.CLAD30Z

LEMOIn Stock: 726FGG.00.303.CLAD30Z Datasheet

Current PartRFQ

S2CL0C-P03MCC0-3000

ODUIn Stock: 959S2CL0C-P03MCC0-3000 Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

The ODU S2CL0C-P03MCC0-3000 is identified as a substitute based on the following critical parameters that determine functional compatibility:

• Connector Type & Gender: Both are plug connectors with male pins
• Position Count: Both feature 3-position configurations
• Termination Method: Both utilize solder cup termination
• Fastening Mechanism: Both employ push-pull fastening
• Contact Material & Finish: Both use brass contacts with gold mating finish
• Shell Material: Both feature brass construction with chrome plating
• Insert Material: Both use polyetheretherketone (PEEK)
• Shielding: Both provide shielded construction
• Ingress Protection: Both meet IP50 dust protection rating
• Regulatory Compliance: Both are ROHS3 compliant and REACH unaffected

Parameter Comparison

Engineering Selection Recommendations

Both the LEMO FGG.00.303.CLAD30Z and ODU S2CL0C-P03MCC0-3000 are active production parts with ROHS3 compliance and REACH unaffected status, making them suitable for regulated applications. The ODU substitute provides a higher current rating of 4A compared to the LEMO's 3A rating. However, the LEMO part supports an extended operating temperature range of -55°C to 250°C, whereas the ODU part operates within -40°C to 120°C. Selection between these parts should be based on the specific application's current requirements and thermal operating conditions. Both parts meet the same ingress protection and regulatory standards.

Frequently Asked Questions (FAQ)

Q: Can the ODU S2CL0C-P03MCC0-3000 be used as a direct replacement for the LEMO FGG.00.303.CLAD30Z?

A: Both connectors share the same fundamental specifications: 3-position plug configuration, male pins, solder cup termination, push-pull fastening, and IP50 ingress protection. However, differences in operating temperature range and current rating must be evaluated against application requirements before substitution.

Q: What are the key differences between these two parts?

A: The primary differences are operating temperature range (LEMO: -55°C to 250°C; ODU: -40°C to 120°C) and current rating (LEMO: 3A; ODU: 4A). The ODU part also specifies a cable opening range of 0.098" to 0.118", while the LEMO part specifies 0.118".

Q: Are both parts compliant with environmental regulations?

A: Yes. Both the LEMO FGG.00.303.CLAD30Z and ODU S2CL0C-P03MCC0-3000 are ROHS3 compliant and REACH unaffected, meeting current environmental standards for electronic components.

Q: What is the significance of the shell finish difference?

A: The LEMO part features chrome plating, while the ODU part features chrome over nickel plating. Both finishes provide corrosion resistance and durability. The nickel underplate in the ODU part may provide additional corrosion protection in certain environments.

Q: How do the solder cup terminations compare?

A: Both parts utilize solder cup termination, allowing direct soldering of cable conductors. This termination method is identical in both connectors, ensuring compatibility in assembly processes.