FGA.0B.307.CLAD35Z Equivalent & Substitute Parts

Part Overview

The FGA.0B.307.CLAD35Z is a 7-position circular connector plug with male pins and solder cup termination, manufactured by LEMO. This connector is designed for applications requiring shielded, push-pull fastening with gold-plated mating contacts and operates across an extended temperature range of -55°C to 250°C. The part is currently active in production with 700 units in stock. Equivalent and substitute parts are identified to provide alternative sourcing options when the primary part is unavailable or when design requirements permit functional alternatives.

Substiute Parts

FGA.0B.307.CLAD35Z

LEMOIn Stock: 740FGA.0B.307.CLAD35Z Datasheet

Current PartRFQ

S20LAC-P07MCC0-420S

ODUIn Stock: 734S20LAC-P07MCC0-420S Datasheet

SimilarRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FGA.0B.307.CLAD35Z is determined by the following critical parameters:

• Connector Type & Pin Configuration: Plug with male pins, 7-position configuration
• Termination Method: Solder cup termination for PCB or cable assembly
• Fastening Mechanism: Push-pull coupling for secure mating
• Electrical Performance: Gold-plated mating contacts with shielded design
• Environmental Protection: IP50 ingress protection rating
• Compliance: ROHS3 compliance and REACH unaffected status

The substitute part S20LAC-P07MCC0-420S from ODU meets these core functional requirements. Both parts share identical connector type, pin count, termination method, fastening type, contact finish, shielding, and compliance certifications. Differences exist in operating temperature range, current rating, and shell finish specifications, which must be evaluated against specific application requirements.

Parameter Comparison

Engineering Selection Recommendations

Both the FGA.0B.307.CLAD35Z and S20LAC-P07MCC0-420S are active production parts with ROHS3 compliance and REACH unaffected status, meeting current regulatory requirements for industrial and commercial applications.

The FGA.0B.307.CLAD35Z supports an extended operating temperature range of -55°C to 250°C, making it suitable for high-temperature applications. The S20LAC-P07MCC0-420S operates within -40°C to 120°C, appropriate for standard industrial and medical environments.

The S20LAC-P07MCC0-420S provides a higher current rating of 4A compared to the 2.5A rating of the FGA.0B.307.CLAD35Z, offering greater electrical capacity for power-intensive circuits.

Selection between these parts should be based on application-specific requirements for operating temperature range and current capacity. Both parts maintain identical mechanical compatibility, connector interface, and compliance certifications.

Frequently Asked Questions (FAQ)

Q: Can the S20LAC-P07MCC0-420S replace the FGA.0B.307.CLAD35Z in all applications?

A: Substitution is valid when the application operates within the S20LAC-P07MCC0-420S temperature range of -40°C to 120°C and does not require the extended high-temperature capability of the FGA.0B.307.CLAD35Z. Both parts share identical connector type, pin configuration, termination method, and fastening mechanism.

Q: What are the key differences between these two parts?

A: The primary differences are operating temperature range (FGA.0B.307.CLAD35Z: -55°C to 250°C; S20LAC-P07MCC0-420S: -40°C to 120°C) and current rating (FGA.0B.307.CLAD35Z: 2.5A; S20LAC-P07MCC0-420S: 4A). Shell finish also differs (Chrome versus Chrome over Nickel).

Q: Are both parts RoHS compliant?

A: Yes, both the FGA.0B.307.CLAD35Z and S20LAC-P07MCC0-420S are ROHS3 compliant and REACH unaffected.

Q: What is the cable opening specification for each part?

A: FGA.0B.307.CLAD35Z: 0.130" ~ 0.165" (3.30mm ~ 4.20mm); S20LAC-P07MCC0-420S: 0.118" ~ 0.165" (3.00mm ~ 4.20mm).

Q: Do both connectors feature the same ingress protection rating?

A: Yes, both parts are rated IP50 - Dust Protected.