FDSD0630-H-2R2M=P3 Equivalent & Substitute Parts

Part Overview

The FDSD0630-H-2R2M=P3 is a 2.2 µH shielded drum core wirewound inductor manufactured by Murata Electronics, rated for 7.1 A continuous current with a maximum DC resistance of 17 mOhm. This component is classified as obsolete, necessitating identification of active equivalent parts for ongoing design requirements and procurement needs.

Substiute Parts

FDSD0630-H-2R2M=P3

Murata ElectronicsIn Stock: 1442FDSD0630-H-2R2M=P3 Datasheet

Current PartRFQ

0630CDMCCDS-2R2MC

Sumida America Components Inc.In Stock: 789850630CDMCCDS-2R2MC Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FDSD0630-H-2R2M=P3 is determined by the following critical parameters:

• Inductance value: 2.2 µH (±20% tolerance)
• Current rating: minimum 7.1 A continuous
• Saturation current: minimum 12 A
• DC resistance: 17 mOhm maximum
• Shielding: required
• Package footprint: 7.00mm x 6.60mm x 3.00mm maximum
• Surface mount configuration
• Inductance measurement at 100 kHz

The substitute part 0630CDMCCDS-2R2MC meets all substitution criteria. While it employs molded construction versus drum core construction, the electrical performance envelope and physical dimensions remain compatible with the original specification.

Parameter Comparison

Engineering Selection Recommendations

The 0630CDMCCDS-2R2MC from Sumida America Components Inc. is the qualified substitute for the obsolete FDSD0630-H-2R2M=P3. Selection is based on:

• Active product status with established supply chain availability
• Electrical parameters that exceed or match the original specification across all critical ratings
• Identical physical footprint and mounting configuration
• ROHS3 compliance and unlimited moisture sensitivity level matching the original part
• Identical inductance value and tolerance at the 100 kHz test frequency
• Superior DC resistance performance (15 mOhm vs. 17 mOhm maximum)
• Higher current handling capability (9.3 A vs. 7.1 A)

Frequently Asked Questions (FAQ)

Q: Can the 0630CDMCCDS-2R2MC be used as a direct replacement for FDSD0630-H-2R2M=P3?

A: Yes. Both parts share identical inductance values, tolerances, package dimensions, and shielding characteristics. The substitute part exceeds the original specification in current rating and saturation current while maintaining superior DC resistance performance.

Q: What is the difference between drum core and molded construction?

A: The original part uses drum core wirewound construction, while the substitute uses molded construction. Both achieve the required electrical performance and shielding. The molded design provides equivalent electromagnetic characteristics within the specified tolerance band.

Q: Are the packaging formats compatible?

A: The original part is supplied in Cut Tape (CT) & Digi-Reel format, while the substitute is supplied in Tape & Reel (TR) format. Both are surface mount compatible with identical footprints (7.00mm x 6.60mm x 3.00mm). Packaging format selection depends on assembly process requirements.

Q: Do both parts meet the same compliance standards?

A: Yes. Both parts are ROHS3 compliant with MSL rating 1 (Unlimited). Both are classified under ECCN EAR99 and HTSUS 8504.50.4000.

Q: What is the operating temperature range for the substitute part?

A: The 0630CDMCCDS-2R2MC operates across -55°C to 125°C. The original part's operating temperature range was not specified in the available documentation.