FDP075N15A-F032 Equivalent & Substitute Parts

Part Overview

The FDP075N15A-F032 is an N-Channel MOSFET rated for 150V drain-to-source voltage with 130A continuous drain current at 25°C (Tc) and 333W maximum power dissipation. This device is manufactured by onsemi under the PowerTrench® series and is packaged in a TO-220-3 through-hole configuration.

The FDP075N15A-F032 carries an Obsolete product status. Identifying equivalent and substitute parts is necessary to maintain design continuity, ensure supply chain availability, and support ongoing production requirements for applications utilizing this component.

Substiute Parts

FDP075N15A-F032

onsemiIn Stock: 1050FDP075N15A-F032 Datasheet

Current PartRFQ

NTP7D3N15MC

onsemiIn Stock: 858NTP7D3N15MC Datasheet

SimilarRFQ

FDP075N15A-F102

onsemiIn Stock: 37402FDP075N15A-F102 Datasheet

Parametric EquivalentRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FDP075N15A-F032 are identified based on strict electrical and mechanical parameter alignment within the N-Channel MOSFET category. The substitution logic is governed by the following critical parameters:

Electrical Compatibility Criteria:

• Drain to Source Voltage (Vdss): 150V minimum
• Continuous Drain Current (Id) @ 25°C: 130A or greater
• On-State Resistance (Rds On): 7.5mOhm or lower at specified conditions
• Gate Threshold Voltage (Vgs(th)): 4V or lower
• Power Dissipation: 333W or greater
• Operating Temperature Range: -55°C to 175°C or wider

Mechanical Compatibility Criteria:

• Package Type: TO-220-3 through-hole configuration
• Mounting Type: Through Hole

Substitute parts must satisfy all electrical parameters at or above the main part specifications and maintain identical mechanical packaging to ensure direct board-level compatibility without design modification.

Parameter Comparison

Engineering Selection Recommendations

FDP075N15A-F102 (Parametric Equivalent)

The FDP075N15A-F102 is the primary substitute for the FDP075N15A-F032. This part maintains identical electrical specifications including 150V Vdss, 130A continuous drain current, 7.5mOhm Rds On, and 333W power dissipation. Both devices share the same gate threshold voltage (4V @ 250µA), gate charge (100nC @ 10V), and operating temperature range (-55°C to 175°C). The FDP075N15A-F102 is packaged in TO-220-3 through-hole configuration, providing direct mechanical compatibility.

The FDP075N15A-F102 carries Active product status with 37,300 units in stock, ensuring supply chain continuity. This part is ROHS3 compliant and REACH unaffected, meeting current regulatory requirements. The parametric equivalence and active status make this the recommended direct replacement.

NTP7D3N15MC (Functional Substitute)

The NTP7D3N15MC is a functional substitute suitable for applications where continuous drain current requirements are 101A or lower. This part shares the 150V Vdss rating and TO-220-3 through-hole package with the main part. The NTP7D3N15MC exhibits superior on-state resistance (7.3mOhm @ 62A, 10V) and lower gate charge (53nC @ 10V), resulting in reduced power dissipation (166W Tc) compared to the main part.

The NTP7D3N15MC carries Active product status with 837 units in stock. This part is ROHS3 compliant and REACH unaffected. However, the reduced continuous drain current (101A Tc versus 130A Tc) and power dissipation (166W versus 333W) restrict its use to applications operating below these thresholds. The higher gate threshold voltage (4.5V @ 342µA) may also affect gate drive circuit design.

Frequently Asked Questions (FAQ)

Q: Can the FDP075N15A-F102 be used as a direct replacement for the FDP075N15A-F032?

A: Yes. The FDP075N15A-F102 is a parametric equivalent with identical electrical specifications and mechanical packaging. No circuit modifications are required for direct substitution.

Q: What are the key differences between the NTP7D3N15MC and the FDP075N15A-F032?

A: The NTP7D3N15MC has a lower continuous drain current rating (101A Tc versus 130A Tc) and reduced power dissipation (166W Tc versus 333W Tc). The gate threshold voltage is higher (4.5V versus 4V). These differences limit the NTP7D3N15MC to applications with lower current and power requirements.

Q: Are all substitute parts available in the same packaging?

A: Yes. Both substitute parts are packaged in TO-220-3 through-hole configuration, identical to the main part. No PCB layout modifications are necessary.

Q: What is the product status significance for component selection?

A: The FDP075N15A-F032 is Obsolete, making it unavailable for new orders. The FDP075N15A-F102 and NTP7D3N15MC are both Active products with current manufacturing and inventory support, ensuring long-term supply availability.

Q: Do the substitute parts meet the same regulatory compliance standards?

A: Yes. Both substitute parts are ROHS3 compliant and REACH unaffected, matching the regulatory status of the main part.

Q: Which substitute part should be selected for high-current applications?

A: The FDP075N15A-F102 is the appropriate choice for applications requiring 130A continuous drain current and 333W power dissipation. The NTP7D3N15MC is limited to applications with maximum continuous drain current of 101A.

Q: Are there any gate drive circuit considerations when substituting parts?

A: The NTP7D3N15MC has a higher gate threshold voltage (4.5V @ 342µA) compared to the main part (4V @ 250µA). Existing gate drive circuits designed for the FDP075N15A-F032 may require adjustment if switching to the NTP7D3N15MC. The FDP075N15A-F102 maintains identical gate threshold specifications and requires no gate drive modifications.