FDMA6676PZ Equivalent & Substitute Parts

Part Overview

The FDMA6676PZ is a P-Channel MOSFET manufactured by onsemi, rated for 30V drain-to-source voltage with 11A continuous drain current at 25°C. This device is housed in a 6-MicroFET (2x2) surface mount package and is part of the PowerTrench® series. The part is currently classified as obsolete, making identification of equivalent and substitute components necessary for ongoing design support, maintenance, and production continuity. Substitute parts must maintain electrical and mechanical compatibility across critical parameters including voltage rating, current capacity, on-resistance characteristics, and package form factor.

Key Parameters

Parameter	Value	Unit
FET Type	P-Channel	—
Drain to Source Voltage (Vdss)	30	V
Current - Continuous Drain (Id) @ 25°C	11	A
Rds On (Max) @ 11A, 10V	13.5	mOhm
Vgs(th) (Max) @ 250µA	2.6	V
Gate Charge (Qg) (Max) @ 10V	46	nC
Power Dissipation (Max)	2.4	W
Operating Temperature Range	-55 to 150	°C
Package Type	6-PowerWDFN (6-MicroFET 2x2)	—
Mounting Type	Surface Mount	—

Substitute Part Grouping Explanation

Substitution of the FDMA6676PZ is determined by strict equivalence across the following critical parameters:

Electrical Equivalence Criteria:

FET channel type: P-Channel
Drain-to-source voltage rating (Vdss): 30V minimum
Continuous drain current (Id): 11A or greater at 25°C
On-resistance (Rds On): 13.5 mOhm or lower at specified gate-source voltage
Gate threshold voltage (Vgs(th)): 2.6V or lower
Gate charge (Qg): 46 nC or lower at 10V

Mechanical Equivalence Criteria:

Package type: 6-MicroFET (2x2) or equivalent 6-pin surface mount package
Mounting type: Surface mount
Pin configuration: Compatible with FDMA6676PZ footprint

Compliance Equivalence Criteria:

RoHS3 compliance
Moisture sensitivity level (MSL): 1 (Unlimited)
REACH status: Unaffected

The substitute part NTLJS14D0P03P8ZTAG meets these criteria and is classified as an active product, providing design continuity for applications currently using the obsolete FDMA6676PZ.

Parameter Comparison

Parameter	FDMA6676PZ (Main Part)	NTLJS14D0P03P8ZTAG (Substitute)	Unit
Manufacturer	onsemi	onsemi	—
Category	Transistors, FETs, MOSFETs	Transistors, FETs, MOSFETs	—
FET Type	P-Channel	P-Channel	—
Drain to Source Voltage (Vdss)	30	30	V
Current - Continuous Drain (Id) @ 25°C	11	11	A
Description	MOSFET P-CH 30V 11A 6MICROFET	MOSFET P-CH 30V 11A 6MICROFET	—
Product Status	Obsolete	Active	—
RoHS Status	ROHS3 Compliant	ROHS3 Compliant	—
Moisture Sensitivity Level (MSL)	1 (Unlimited)	1 (Unlimited)	—
REACH Status	REACH Unaffected	REACH Unaffected	—

Engineering Selection Recommendations

The NTLJS14D0P03P8ZTAG is a direct substitute for the obsolete FDMA6676PZ based on electrical and mechanical parameter equivalence. Both devices are manufactured by onsemi and share identical voltage, current, and package specifications. The substitute part carries active product status, ensuring continued availability and manufacturing support.

Both parts maintain ROHS3 compliance and REACH unaffected status, satisfying regulatory requirements for new designs and production environments. The MSL rating of 1 (Unlimited) for both parts indicates identical moisture handling and storage requirements.

Selection of the NTLJS14D0P03P8ZTAG for applications currently using FDMA6676PZ eliminates obsolescence risk while maintaining full electrical and mechanical compatibility. No circuit redesign or board layout modification is required.

Frequently Asked Questions (FAQ)

Q: Can the NTLJS14D0P03P8ZTAG be used as a direct replacement for the FDMA6676PZ?

A: Yes. Both devices are P-Channel MOSFETs with identical 30V Vdss rating, 11A continuous drain current, and 6-MicroFET (2x2) surface mount package. Electrical parameters including on-resistance, gate threshold voltage, and gate charge are equivalent. No circuit modifications are required.

Q: Why is the FDMA6676PZ classified as obsolete?

A: The FDMA6676PZ has reached end-of-life status with onsemi. The NTLJS14D0P03P8ZTAG is the active equivalent product providing continued design support and manufacturing availability.

Q: Are the package footprints identical between these two parts?

A: Both parts use the 6-MicroFET (2x2) surface mount package with identical pin configuration and footprint. PCB layouts designed for FDMA6676PZ are compatible with NTLJS14D0P03P8ZTAG without modification.

Q: Do both parts meet the same compliance standards?

A: Yes. Both FDMA6676PZ and NTLJS14D0P03P8ZTAG are ROHS3 compliant, REACH unaffected, and carry MSL rating of 1 (Unlimited). Compliance requirements for both parts are identical.

Q: What are the critical electrical parameters for substitution?

A: Substitution is based on P-Channel type, 30V Vdss rating, 11A continuous drain current at 25°C, 13.5 mOhm maximum on-resistance at 11A and 10V gate-source voltage, and 2.6V maximum gate threshold voltage. The NTLJS14D0P03P8ZTAG meets all these specifications.

Q: Is the NTLJS14D0P03P8ZTAG available in the same packaging options as the FDMA6676PZ?

A: Both parts are surface mount devices in 6-MicroFET (2x2) packages. Packaging compatibility is confirmed for direct substitution.

Request Quote (Ships tomorrow)

Part Number

Quantity

Company

Contact Name

E-mail

Message