FD3000014 Equivalent & Substitute Parts

Part Overview

The FD3000014 is a 30 MHz XO (Standard) CMOS oscillator manufactured by Diodes Incorporated, designed for applications requiring a crystal-based frequency reference with enable/disable functionality. This Surface Mount Device (SMD) operates at 3.3V supply voltage and is housed in a compact 4-SMD, No Lead package measuring 5.00mm x 3.20mm. The part is Active in product status and RoHS3 compliant. Substitute parts are identified when equivalent electrical performance and mechanical compatibility can be maintained within the allowed parameter tolerances for this oscillator category.

Substiute Parts

FD3000014

Diodes IncorporatedIn Stock: 969FD3000014 Datasheet

Current PartRFQ

FD3000015

Diodes IncorporatedIn Stock: 6439FD3000015 Datasheet

MFR RecommendedRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution of the FD3000014 is permissible with parts that maintain the following critical parameters:

• Frequency: 30 MHz (exact match required)
• Output Type: CMOS (exact match required)
• Supply Voltage: 3.3V (exact match required)
• Function: Enable/Disable (exact match required)
• Package / Case: 4-SMD, No Lead (exact match required)
• Size / Dimension: 5.00mm x 3.20mm (exact match required)
• Height - Seated (Max): 1.30mm (exact match required)
• Mounting Type: Surface Mount (exact match required)
• Current - Supply (Max): 15mA (exact match required)
• Current - Supply (Disable) (Max): 10µA (exact match required)
• RoHS Status: ROHS3 Compliant (exact match required)
• Moisture Sensitivity Level (MSL): 1 (Unlimited) (exact match required)

Variations in frequency stability and operating temperature range are permitted within the allowed electrical and mechanical parameter set for this oscillator category, provided all critical parameters listed above remain unchanged.

Parameter Comparison

Engineering Selection Recommendations

Both FD3000014 and FD3000015 are Active products manufactured by Diodes Incorporated and maintain full RoHS3 compliance and REACH Unaffected status. The parts are electrically and mechanically interchangeable based on critical parameters including frequency, output type, supply voltage, function, package configuration, and current specifications.

The FD3000015 substitute part offers an extended operating temperature range (-40°C ~ 85°C versus -20°C ~ 70°C) compared to the main part. However, the FD3000015 exhibits lower frequency stability (±50ppm versus ±25ppm). Selection between these parts should be based on application-specific requirements for operating temperature range and frequency stability tolerance.

Frequently Asked Questions (FAQ)

Q: Can FD3000015 be used as a direct replacement for FD3000014?

A: Yes, FD3000015 is a direct substitute for FD3000014 in applications where the extended operating temperature range (-40°C ~ 85°C) and lower frequency stability specification (±50ppm) are acceptable. All critical electrical and mechanical parameters are identical.

Q: What is the difference in frequency stability between these parts?

A: FD3000014 provides ±25ppm frequency stability, while FD3000015 provides ±50ppm. Applications requiring tighter frequency tolerance should use FD3000014. Applications with relaxed frequency tolerance requirements may use FD3000015.

Q: Are the packages identical?

A: Yes. Both parts use the same 4-SMD, No Lead package with identical dimensions (5.00mm x 3.20mm) and maximum seated height (1.30mm). PCB footprints and assembly processes are identical.

Q: What is the operating temperature difference?

A: FD3000014 operates from -20°C to 70°C, while FD3000015 operates from -40°C to 85°C. Applications requiring operation below -20°C or above 70°C must use FD3000015.

Q: Are both parts RoHS compliant?

A: Yes. Both FD3000014 and FD3000015 are ROHS3 Compliant with Moisture Sensitivity Level 1 (Unlimited) and REACH Unaffected status.