FD1600017 Equivalent & Substitute Parts

Part Overview

The FD1600017 is a 16 MHz XO (Standard) CMOS Oscillator manufactured by Diodes Incorporated, part of the SaRonix-eCera™ FD series. This surface mount crystal oscillator operates at 3.3V with Enable/Disable functionality and is housed in a 4-SMD, No Lead package. The device is Active status and ROHS3 compliant. Substitute parts are identified when equivalent electrical and mechanical specifications allow direct replacement in circuit applications while maintaining performance requirements.

Substiute Parts

FD1600017

Diodes IncorporatedIn Stock: 756FD1600017 Datasheet

Current PartRFQ

FD1600016

Diodes IncorporatedIn Stock: 1226FD1600016 Datasheet

MFR RecommendedRFQ

SXO53C3A481-16.000M

Suntsu Electronics, Inc.In Stock: 6421SXO53C3A481-16.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitute parts for the FD1600017 are qualified based on the following critical parameters:

• Frequency match: 16 MHz
• Output type: CMOS
• Supply voltage: 3.3V
• Enable/Disable function capability
• Package compatibility: 4-SMD, No Lead
• Physical dimensions: 0.197" L x 0.126" W (5.00mm x 3.20mm)
• Surface mount mounting type
• RoHS3 compliance

The FD1600016 (Diodes Incorporated) and SXO53C3A481-16.000M (Suntsu Electronics) meet these core electrical and mechanical requirements, allowing substitution in applications where the FD1600017 is specified.

Parameter Comparison

Engineering Selection Recommendations

All three parts maintain Active product status and ROHS3 compliance. The FD1600016 offers tighter frequency stability (±25ppm) compared to the FD1600017 (±50ppm) but operates within a narrower temperature range (-20°C ~ 70°C versus -40°C ~ 85°C). The SXO53C3A481-16.000M from Suntsu Electronics provides equivalent frequency stability and temperature range to the FD1600017 with marginally higher maximum supply current (16mA versus 15mA) and slightly greater seated height (0.055" versus 0.051"). Selection between these parts depends on application-specific requirements for temperature range, frequency stability, and supply current constraints.

Frequently Asked Questions (FAQ)

Q: Can FD1600016 replace FD1600017 in all applications?

A: FD1600016 is electrically compatible for core oscillator function. However, applications requiring operation below -20°C or above 70°C must use FD1600017 or SXO53C3A481-16.000M, which support -40°C ~ 85°C range. Applications requiring ±50ppm frequency stability should use FD1600017 or SXO53C3A481-16.000M rather than FD1600016 (±25ppm).

Q: Is the SXO53C3A481-16.000M physically compatible with FD1600017?

A: Yes. Both parts use identical 4-SMD, No Lead packaging with 0.197" L x 0.126" W (5.00mm x 3.20mm) footprint. The SXO53C3A481-16.000M seated height is 0.055" (1.40mm) compared to 0.051" (1.30mm) for FD1600017, a 0.004" difference that does not affect PCB layout compatibility.

Q: What are the key electrical differences between these parts?

A: All three parts operate at 16 MHz CMOS output with 3.3V supply and Enable/Disable function. FD1600016 specifies ±25ppm frequency stability versus ±50ppm for FD1600017 and SXO53C3A481-16.000M. Maximum supply current is 15mA for both Diodes parts and 16mA for the Suntsu part. Disable mode current is specified as 10µA for Diodes parts only.

Q: Are all substitute parts RoHS compliant?

A: Yes. FD1600017, FD1600016, and SXO53C3A481-16.000M are all ROHS3 compliant. Moisture sensitivity level is specified as 1 (Unlimited) for both Diodes parts; this specification is not provided for the Suntsu part.