FD1000017 Crystal Oscillator - Equivalent & Substitute Parts

Part Overview

The FD1000017 is a 10 MHz crystal oscillator manufactured by Diodes Incorporated, part of the SaRonix-eCera™ FD series. This CMOS oscillator operates at 3.3V with enable/disable functionality and is housed in a 4-SMD, No Lead surface mount package. The device is currently in active production status with 1105 units in stock.

Substitute parts are identified when they maintain electrical compatibility across critical parameters including frequency, output type, supply voltage, operating temperature range, and physical package dimensions. Identifying qualified alternatives ensures design flexibility and supply chain resilience.

Substiute Parts

FD1000017

Diodes IncorporatedIn Stock: 1161FD1000017 Datasheet

Current PartRFQ

SXO53C3A481-10.000M

Suntsu Electronics, Inc.In Stock: 1794SXO53C3A481-10.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FD1000017 is determined by strict alignment with the following electrical and mechanical parameters:

• Frequency: 10 MHz (exact match required)
• Output Configuration: CMOS (exact match required)
• Supply Voltage: 3.3V (exact match required)
• Enable/Disable Function: Present (exact match required)
• Frequency Stability: ±50ppm (exact match required)
• Operating Temperature: -40°C to 85°C (exact match required)
• Package: 4-SMD, No Lead (exact match required)
• Physical Footprint: 5.00mm × 3.20mm (exact match required)
• Regulatory Compliance: ROHS3 Compliant (exact match required)

The SXO53C3A481-10.000M from Suntsu Electronics meets all substitution criteria and qualifies as a direct equivalent.

Parameter Comparison

Engineering Selection Recommendations

Both the FD1000017 and SXO53C3A481-10.000M are active production devices with ROHS3 compliance and identical regulatory classifications. Selection between these parts should be based on:

• Availability and lead time requirements
• Packaging format preference (FD1000017 supplied in standard packaging; SXO53C3A481-10.000M supplied in bulk)
• Supply chain sourcing strategy
• Current draw tolerance (SXO53C3A481-10.000M maximum 16mA versus FD1000017 maximum 15mA)

Both devices are suitable for direct substitution in applications requiring 10 MHz CMOS oscillators with 3.3V operation and enable/disable control.

Frequently Asked Questions (FAQ)

Q: Can the SXO53C3A481-10.000M be used as a direct replacement for the FD1000017?

A: Yes. Both parts share identical electrical specifications, frequency, output type, supply voltage, operating temperature range, and physical package dimensions. The 1mA difference in maximum supply current (16mA vs 15mA) is within acceptable design margins for CMOS oscillator applications.

Q: Are there any physical compatibility concerns between these parts?

A: No. Both oscillators use the 4-SMD, No Lead package with identical footprint dimensions of 5.00mm × 3.20mm. PCB layout and reflow profiles remain unchanged.

Q: What is the significance of the ±50ppm frequency stability specification?

A: Frequency stability of ±50ppm indicates the maximum frequency deviation across the operating temperature range and supply voltage variations. Both parts meet this specification, ensuring equivalent timing accuracy in applications.

Q: Do both parts support enable/disable functionality?

A: Yes. Both the FD1000017 and SXO53C3A481-10.000M include enable/disable control, allowing power management in applications requiring oscillator shutdown.

Q: Are there differences in regulatory compliance between these parts?

A: No. Both parts are ROHS3 compliant, classified as EAR99 for export control, and share the same HTSUS commodity code (8542.39.0001).