FD1000016 Equivalent & Substitute Parts

Part Overview

The FD1000016 is a 10 MHz crystal oscillator manufactured by Diodes Incorporated, part of the SaRonix-eCera™ FD series. This CMOS oscillator operates at 3.3V with enable/disable functionality and is housed in a 4-SMD, No Lead package. The device is currently in active production status with 1098 pieces available in inventory. Alternative equivalent parts may be required due to supply constraints, design flexibility, or procurement optimization across multiple suppliers.

Substiute Parts

FD1000016

Diodes IncorporatedIn Stock: 1130FD1000016 Datasheet

Current PartRFQ

SXO53C3C271-10.000M

Suntsu Electronics, Inc.In Stock: 1795SXO53C3C271-10.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

Substitution eligibility for the FD1000016 is determined by strict alignment of the following critical parameters:

• Frequency: 10 MHz (exact match required)
• Output Configuration: CMOS
• Supply Voltage: 3.3V
• Enable/Disable Function: Required
• Package Type: 4-SMD, No Lead (mechanical and electrical compatibility)
• Physical Dimensions: 5.00mm x 3.20mm (PCB layout compatibility)
• Operating Temperature Range: -20°C ~ 70°C (minimum)
• Frequency Stability: ±25ppm (maximum tolerance)
• RoHS3 Compliance: Required for regulatory alignment

The SXO53C3C271-10.000M from Suntsu Electronics meets all substitution criteria across these parameters, enabling direct functional replacement in applications requiring 10 MHz CMOS oscillator operation.

Parameter Comparison

Engineering Selection Recommendations

Both the FD1000016 and SXO53C3C271-10.000M are active production devices with full ROHS3 compliance and identical export classification (EAR99). Selection between these parts should be based on:

• Supply availability and lead time requirements
• Procurement cost and volume pricing structures
• Existing supplier relationships and qualification status
• Inventory management and stock rotation policies

The SXO53C3C271-10.000M exhibits marginally higher maximum supply current (16mA vs. 15mA) and seated height (1.40mm vs. 1.30mm), both within acceptable operational margins for standard PCB designs. These minor variations do not restrict substitution eligibility.

Frequently Asked Questions (FAQ)

Q: Can the SXO53C3C271-10.000M directly replace the FD1000016 without PCB modifications?

A: Yes. Both parts share identical package type (4-SMD, No Lead), physical footprint (5.00mm x 3.20mm), and electrical specifications (10 MHz, CMOS output, 3.3V supply, ±25ppm stability). The 0.10mm difference in seated height (1.40mm vs. 1.30mm) is within standard PCB assembly tolerances and does not require layout changes.

Q: Are there any functional differences between these oscillators?

A: No. Both devices provide identical frequency output, enable/disable control, operating temperature range, and frequency stability. The 1mA difference in maximum supply current is negligible for most applications.

Q: What compliance certifications apply to both parts?

A: Both the FD1000016 and SXO53C3C271-10.000M are ROHS3 compliant, classified as EAR99 for export purposes, and assigned HTSUS code 8542.39.0001. Both carry MSL 1 rating (FD1000016) or equivalent moisture sensitivity classification.

Q: Can these parts be used interchangeably in production?

A: Yes, provided that both parts have been qualified through your organization's component engineering and procurement processes. Substitution is electrically and mechanically valid based on parameter alignment.

Q: What is the significance of the ±25ppm frequency stability specification?

A: Frequency stability of ±25ppm defines the maximum frequency deviation across the operating temperature range (-20°C to 70°C) and over the device lifetime. Both parts meet this specification, ensuring timing accuracy for digital systems, communication protocols, and clock distribution applications.