FD1000015 Equivalent & Substitute Parts

Part Overview

The FD1000015 is a 10 MHz crystal oscillator manufactured by Diodes Incorporated, part of the SaRonix-eCera™ FD series. This CMOS oscillator operates at 3.3V with enable/disable functionality and is housed in a 4-SMD, No Lead package. The device is currently in active production status with 1043 units in stock. Alternative equivalent parts may be required due to supply chain constraints, design flexibility, or specific application requirements where substitute components meet identical electrical and mechanical specifications.

Substiute Parts

FD1000015

Diodes IncorporatedIn Stock: 1094FD1000015 Datasheet

Current PartRFQ

SXO53C3A271-10.000M

Suntsu Electronics, Inc.In Stock: 2046SXO53C3A271-10.000M Datasheet

DirectRFQ

Key Parameters

Substitute Part Grouping Explanation

The FD1000015 has one identified equivalent substitute: SXO53C3A271-10.000M manufactured by Suntsu Electronics, Inc. This substitution is valid based on the following critical parameters that determine functional and mechanical compatibility:

• Identical frequency: 10 MHz
• Identical output type: CMOS
• Identical supply voltage: 3.3V
• Identical enable/disable function
• Identical frequency stability: ±50ppm
• Identical operating temperature range: -20°C ~ 70°C
• Identical package type: 4-SMD, No Lead
• Identical package dimensions: 5.00mm x 3.20mm
• Compatible maximum height specifications (1.30mm vs 1.40mm)
• Both ROHS3 compliant
• Both active production status

Parameter Comparison

Engineering Selection Recommendations

Both the FD1000015 and SXO53C3A271-10.000M are active production components with ROHS3 compliance and identical core electrical specifications. The SXO53C3A271-10.000M operates at a marginally higher maximum supply current (16mA versus 15mA) and has a slightly greater maximum height (1.40mm versus 1.30mm), both of which remain within acceptable tolerances for standard PCB layouts. Selection between these parts should be based on availability, lead time, and procurement cost, as both components meet all specified electrical and mechanical requirements for direct substitution in 10 MHz CMOS oscillator applications requiring enable/disable functionality at 3.3V.

Frequently Asked Questions (FAQ)

Q: Can the SXO53C3A271-10.000M be used as a direct replacement for the FD1000015?

A: Yes. Both components share identical frequency, output type, supply voltage, function, frequency stability, operating temperature range, and package dimensions. The SXO53C3A271-10.000M is a direct functional equivalent.

Q: What is the difference in maximum height between these oscillators?

A: The FD1000015 has a maximum seated height of 1.30mm, while the SXO53C3A271-10.000M measures 1.40mm. This 0.10mm difference is typically accommodated in standard PCB designs with 4-SMD, No Lead packages and does not affect electrical performance or board-level compatibility.

Q: Are there differences in current consumption between these parts?

A: The FD1000015 specifies a maximum supply current of 15mA, while the SXO53C3A271-10.000M specifies 16mA. This 1mA difference is negligible for most applications and both parts remain compatible with standard 3.3V power supply designs.

Q: Do both parts have the same moisture sensitivity rating?

A: Yes. Both the FD1000015 and SXO53C3A271-10.000M carry Moisture Sensitivity Level 1 (Unlimited), indicating no special moisture handling precautions are required during storage or assembly.

Q: Are both parts RoHS compliant?

A: Yes. Both components are ROHS3 compliant and suitable for applications requiring RoHS certification.

Q: What packaging options are available for these oscillators?

A: The FD1000015 is available in Bulk packaging, while the SXO53C3A271-10.000M is also available in Bulk packaging. Both use identical 4-SMD, No Lead surface mount packages with 5.00mm x 3.20mm dimensions.